B 12 " 10 9 8 7 6 5 | 4 | 3 | 2 1 CKT.| DIM. "A" DIM. "B" SIZE] MM | IN. | MM | IN. ee a 2 | 254 | .100 | 5.33 | .210 3 | 5.08 | .200 | 8.13 | .320 4_| 7.62 | .300 | 10.67 | .420 5 | 10.16 | .400 | 13.21 | .520 6 | i270 | .500 | 15.75 | .620 7_|15.24 [_.600 | 18.29 |_.720 8 | 17.78 | .100 | 20.83 | .820 9 | 20.32| .800 | 23.37 | _.920 io | 22.86 | .900 | 25.91] 1.020 ALTERNATIVE CORING BL otae ee Taos T ee SL VERTICAL HEADER (0.64)/.025 SQUARE PIN MANUFACTURER'S OPTION 13_| 30.48 | _1.200 | 33.53 | 1.320 W/LATCH & NO PEGS 14_| 33.02 | 1300 | 36.07 | 1.420 15 | 35.56 | 1.400 | 38.61 | 1.520 - - 16 | 38.10 | 1.500 | 4115 | 1.620 B & B. 38) 7. 815] A/C |D 17 | 40.64] 1.600 | 43.69 | 1.720 AT PIN TIP TYP. 11.43) 18 | 43.18 | 1.700 | 46.23 | 1.820 A -450 19 | 45.72 | 1.800 | 48.77 | 1.920 (8.89) 20 | 48.26 | 1.900 | 5131 | 2.020 (02) le {4.32 0.23) -350 21 | 50.80 | 2,000 | 53.85 | 2.120 .040 .170#,009 (0.38) yp 22 | 53.34 | 2.100 | 56.39 | 2.220 TYP. WALL 2 (2 CKT.) 05 " 23 | 55.88 | 2.200 | 58.93 | 2.320 (4.5740.23) [-A-| 24 | 58.42 | 2.300 | 61.47 | 2.420 | EI "1502.009 25 | 60.96 | 2.400 | 64.01 | 2.520 RoR (3-25 CKTS.) (6.60) (5.08),-- OF HOLE i 7 . 60 REF -200 ~C-] J (2.790. 13) | A P= 110.005 NN | (2 CKT.) (3.05 +0. 13) ao [-p- .1202,005 | OF HOLE (3-25 CKTS.) +E Dvr. , TYP, RESTRICTED AREA 2 CIRCUIT NOTES: \ 1. HEADER MATERIAL: GLASSS FILLED POLYESTER; (2.54 +0,08) (1.09 +0.08) UL 94V-0; COLOR: BLACK 100 +,003 ,043 #.003 PIN MATERIAL: PHOSPHOR BRONZE TYP. NON-ACCUM, DIA. TYP. 3 CIRCUIT BRIGHT TIN - 3.81 MICROMETERS/150 MICROINCHES MINIMUM BRIGHT TIN PLATE OVER NICKEL UNDERPLATE OVERALL RECOMMENDED PC BOARD LAYOUT MATTE TIN - 3.81 MICROMETERS/150 MICROINCHES MINIMUM MATTE TIN PLATE (FOR USE WITH (1.57)/.062 THICK BOARD) OVER NICKEL UNDERPLATE OVERALL 45 GOLD - 0.38 MICROMETERS/15 MICROINCHES MINIMUM GOLD PLATE IN MATE AREA oe 4.91 MICROMETERS/75 MICROINCHES MINIMUM MATTE TIN PLATE IN PC TAIL AREA =S=2| louatiry] GENERAL TOLERANCES | | ] GHIRD. ANGLE OVER NICKEL UNDERPLATE OVERALL SSS) |symBots| (UNLESS SPECIFIED) MM/IN 4:1 INCH PROJECTION 30 GOLD - 0.76 MICROMETERS/30 MICROINCHES MINIMUM GOLD PLATE IN MATE AREA 22s mm INCH _| DRAWN BY DATE TITLE 491 MCROMETERS/75 MCROINCHES MINIMUM MATTE TIN PLATE IN PC TAIL AREA /@S*&lz!G7-0 [7 PLACES|E---_[E--- AB 1987/09/22 SALES ASSY, SL VERTICAL OVER NICKEL UNDERPLATE OVERALL OS r 3 PLACES|t--- |+.005 [CHECKED BY DATE HEADER W/LATCH & NO PEGS mee |b) ~O [2 PLAcEsito13 [+.010 MIM 1987/09/22 (2.54)/.100_CENTERS 3. REFER TO MOLEX PRODUCT SPECIFICATION PS-70541 Ino & >< |W 1PLACE [0.25 |+--- APPROVED BY DATE 4. PACKAGING SPECIFICATION: SEE CHARTS O8& Ps -0 SF AZ 1987/09/22 m i xX vee WSLES 0 PLACE [+ = 5. HEADER TO BE USED WITH OPTION 'G 70400 AND 70430 NZ ES ANGULAR 122 JRATERIAL NO. DOCURENT NO SEE SERIES SL CONMECTORS a=sce oF SEE TABLE SDA-70543-xxxx 1OF 4 6. PARTS CONFORM TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. Ayer DRAFT WHERE APPLICABLE|__= WO <t}_ MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX M1 W WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| 12 " 10 9 8 7 6 5 4 3 | 2 | 1 Rev, G 2012/01/11,B 12 "1 10 9 8 7 6 5 4 3 2 1 ENGINEERING MATING PC TAIL CROT) NUMBER D E AREA AREA PACKAGING: 70543 REF #0.25/.010/ FINISH FINISH (3.30) (6.10) PK-70873-0014 2-25 | -0001-0024 130 240 15 GOLD MATTE TIN | CUBE W70 PaP CAP) (3.30) (6.10) PK-70873-0014 2-25 | -0036-0059 130 340. | BRIGHT TIN | BRIGHT TIN | (OBE Wo P&P CAP) (3.81) (6.10) PK-70873-0014 2-25 | -0071-0094 150 340 | BRIGHT TIN | BRIGHT TIN | (TUBE Wo P&P CAP) 3.30) (6.10) PK-70873-0014 2-25 | -0106-0129 130 540 30 GOLD | MATTE TIN | UKE w7o Pap CaP) (2.54) (6.10) PK-70873-0014 2-25 | -0141-0164 100 540 15 GOLD MATTE TIN | (uge w/o PaP CAP) (3.81) (6.10) PK-70873-0014 2-25 | -0165-0188 150 40 30 GOLD | MATTE TIN | UKE w7o Pap CAP) B.8D (6.10) PK-70873-0014 2-25 | -0200-0223 150 240 15 GOLD MATTE TIN | CUBE W70 P&P CAP) CIRCUIT SIZE | ITEM NUMBER | ITEM NUMBER | ITEM NUMBER | ITEM NUMBER | ITEM NUMBER | ITEM NUMBER | ITEM NUMBER 2 70543-0001 | 70543-0036 | 70543-0071 | 70543-0106 | 70543-0141 | 70543-0165 | 70543-0200 3 70543-0002 | 70543-0037 | 70543-0072 | 70543-0107 | 70543-0142 | 70543-0166 | 70543-0201 4 70543-0003 | 70543-0038 | 70543-0073 | 70543-0108 | 70543-0143 | 70543-0167 | 70543-0202 5 70543-0004 | 70543-0039 | 70543-0074 | 70543-0109 | 70543-0144 | 70543-0168 | 70543-0203 6 70543-0005 | 70543-0040 | 70543-0075 | 70543-0110 | 70543-0145 | 70543-0169 | 70543-0204 7 70543-0006 | 70543-0041 | 70543-0076 | 70543-0111 | 70543-0146 | 70543-0170 | 70543-0205 8 70543-0007 | 70543-0042 | 70543-0077 | 70543-0112 | 70543-0147 | 70543-0171 | 70543-0206 9 70543-0008 | 70543-0043 | 70543-0078 | 70543-0113 | 70543-0148 | 70543-0172 | 70543-0207 10 70543-0009 | 70543-0044 | 70543-0079 | 70543-0114 | 70543-0149 | 70543-0173 | 70543-0208 "1 70543-0010 | 70543-0045 | 70543-0080 | 70543-0115 | 70543-0150 | 70543-0174 | 70543-0209 12 70543-0011 | 70543-0046 | 70543-0081 | 70543-0116 70543-0151 | 70543-0175 | 70543-0210 B 70543-0012 | 70543-0047 | 70543-0082 | 70543-0117 | 70543-0152 | 70543-0176 | 70543-0211 14 70543-0013 _ | 70543-0048 | 70543-0083 | 70543-0118 | 70543-0153 | 70543-0177 | 70543-0212 15 70543-0014 | 70543-0049 | 70543-0084 | 70543-0119 | 70543-0154 | 70543-0178 | 70543-0213 16 70543-0015 | 70543-0050 | 70543-0085 | 70543-0120 | 70543-0155 | 70543-0179 | 70543-0214 17 70543-0016 | 70543-0051 | 70543-0086 | 70543-0121 | 70543-0156 | 70543-0180 | 70543-0215 18 70543-0017. | 70543-0052 | 70543-0087 | 70543-0122 | 70543-0157 | 70543-0181 | 70543-0216 19 70543-0018 | 70543-0053 | 70543-0088 | 70543-0123 | 70543-0158 | 70543-0182 | 70543-0217 20 70543-0019 | 70543-0054 | 70543-0089 | 70543-0124 | 70543-0159 | 70543-0183 | 70543-0218 21 70543-0020 | 70543-0055 | 70543-0090 | 70543-0125 | 70543-0160 | 70543-0184 | 70543-0219 22 70543-0021 | 70543-0056 | 70543-0091 | 70543-0126 | 70543-0161 | 70543-0185 | 70543-0220 23 70543-0022 | 70543-0057 | 70543-0092 | 70543-0127 | 70543-0162 | 70543-0186 | 70543-0221 24 70543-0023 | 70543-0058 | 70543-0093 | 70543-0128 | 70543-0163 | 70543-0187 | 70543-0222 25 70543-0024 | 70543-0059 | 70543-0094 | 70543-0129 | 70543-0164 | 70543-0188 | 70543-0223 Sse QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS. | THIRD ANGLE SSS] Isympots| (UNLESS SPECIFIED) MM/IN 11 INCH Cl pROVECTION g2ss mm INCH _ | DRAWN BY DATE TITLE 3S S1Z//-0 [PLACES|E---[#--- _AAB 1987/09/22 SALES ASSY, SL VERTICAL 24 3 PLACES|+--- _[+.005 _ [CHECKED BY DATE HEADER W/LATCH & NO PEGS Pee _ls|WO [Zz PLacesizo7s [2.010 MM 1987/09/22 (2.54)/.100_CENTERS woo xelw 1 PLACE [0.25 |+--- APPROVED BY DATE tS eral |W (orcacele--- [e- WAZ 1987/09/22 molex WI S San ANGULAR 1/2 MATERIAL NO. DOCUMENT NO. SHEET NO, Wo eee DRAFT WHERE APPLICABLEL_ EE TABLE SDA-70543-xxxx 2 OF 4 Aw oot MUST. REMAIN SIE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX M1 yw WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T 12 " 10 7 6 5 4 3 | 2 | 4 Rev. G 2012/01/11.a 12 1" 40 9 8 7 6 5 4 3 2 ENGINEERING MATING PC TAIL CRCRIT) NUMBER - ot orl AREA AREA PACKAGING: 70543 251. FINISH FINISH (4.06) (6.10) PK-70873-0014 2-25 | -0248-0271 "60 340 | BRIGHT TIN | BRIGHT TIN | (TUBE W/o P&P CAP) (4.06) (6.10) PK-70873-0014 2-25 | -0272-0295 7460 340 15 GOLD | MATTE TIN | trupe wie P&P CAP) (4.06) (6.10) PK-70873-0014 2-25 | -0296-0319 160 340 30 GOLD | MATTE TIN | geo i75 pap CAP) 30) | (6.10) PK-70873-0014 2-25 | -4036-4059 "130 ouo | MATTE TIN | MATTE TIN | (rUgE W/o P&P CAP) CIRCUIT SIZE | TEM NUMBER | ITEM NUMBER | TEM NUMBER | ITEM NUMBER | ITEM NUMBER | ITEM NUMBER | ITEM NUMBER 2 70543-0248 | 70543-0272 | 70543-0296 | 70543-4036 3 70543-0249 | 70543-0273 | 70543-0297 | 70543-4037 4 70543-0250 | 70543-0274 | 70543-0298 | 70543-4038 5 70543-0251 | 70543-0275 | 70543-0299 | 70543-4039 6 70543-0252 | 70543-0276 | 70543-0300 | 70543-4040 7 70543-0253 | 70543-0277 | 70543-0301 | 70543-4041 8 70543-0254 | 70543-0278 | 70543-0302 | 70543-4042 9 70543-0255 | 70543-0279 | 70543-0303 | 70543-4043 10 70543-0256 | 70543-0280 | 70543-0304 | 70543-4044 1 70543-0257 | 70543-0281 | 70543-0305 | 70543-4045 12 70543-0258 | 70543-0282 | 70543-0306 | 70543-4046 B 70543-0259 | 70543-0283 | 70543-0307 | 70543-4047 14 70543-0260 | 70543-0284 | 70543-0308 | 70543-4048 15 70543-0261 | 70543-0285 | 70543-0309 | 70543-4049 16 70543-0262 | 70543-0286 | 70543-0310 | 70543-4050 7 70543-0263 | 70543-0287 | 70543-0311 | 70543-4051 18 70543-0264 | 70543-0288 | 70543-0312 | 70543-4052 19 70543-0265 | 70543-0289 | 70543-0313 | 70543-4053 20 70543-0266 | 70543-0290 | 70543-0314 | 70543-4054 21 70543-0267 | 70543-0291 | 70543-0315 | 70543-4055 22 70543-0268 | 70543-0292 | 70543-0316 | 70543-4056 23 70543-0269 | 70543-0293 | 70543-0317 | 70543-4057 24 70543-0270 | 70543-0294 | 70543-0318 | 70543-4058 25 70543-0271 | 70543-0295 | 70543-0319 | 70543-4059 aase DIMENSION STYLE SCALE DESIGN UNITS Sse] [UAUTY) UNLESS SPECIED) MM/IN 4:1 | INCH | CU ERGECTONS .o = Ss = mm INCH DRAWN BY DATE TITLE BS 52/0/-0 [ZPLACES|E--- [--- [AB 1987/09/22 SALES ASSY, SL VERTICAL 3 3 PLACES|+--- _|+.005 _ [CHECKED BY DATE HEADER W/LATCH & NO PEGS Hee al WA ZPLACES|EOS {#010 MSM eg 9809122 (2.54)/.100 CENTERS Qa >< --- tSSes "I/O by peace === === WAZ 1987/09/22 mi y4 lw 8 Saag ANGULAR +1/2 MATERIAL NO. DOCUMENT NO. SHEET NO. Wo eee DRAFT WHERE APPLICABLEL_2EE TABLE SDA-70543-xxxx 3 OF 4 Win Sot MUST. REMAIN SZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX M1 [a WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| 12 " 10 9 8 7 6 5 4 3 | 2 | 1 Rev. G 2012/01/11a 12 " 40 9 8 7 6 5 4 3 2 1 ENGINEERING MATING PC TAIL CROMIT) NUMBER REF 0 5) orl AREA AREA PACKAGING: 70543 25/, FINISH FINISH (3.30) (6.10) 705430001-PK 3-25 | -0337-0359 | 55 349 | BRIGHT TIN | BRIGHT TIN |TUse with Pap CAP) CIRCUIT SIZE | ITEM NUMBER | ITEM NUMBER | ITEM NUMBER 3 4 70543-0338 5 6 7 8 9 PICK & PLACE CAP POSITION PICK & PLACE CAP POSITION 10 EVEN CIRCUITS ODD CIRCUITS 11 fy fy : Loui 3 ~*~ 14 5 16 7 18 \ J 19 A 20 21 22 3 s< SS 24 I F\|@" 4 eaae DIMENSION STYLE SCALE DESIGN UNITS SS 5) ay) UNLESS SPECIIED) MM/IN at | INCH. [OCIAHRD ANGLE ess mm INCH __| DRAWN BY DATE |TITLE SS S)210/=0 [& PLACES|E--- [E--- AB 1987/09/22 SALES ASSY, SL VERTICAL oS = 3 PLACES|+--- _[+.005 _|CHECKED BY DATE HEADER W/LATCH & NO PEGS bee ols W/O [2 PLAces 2073 [+010 MM _1967/09/22 (2.54)/.100 CENTERS QaOa><r =F t--- = 3 a WO opiate fe fe WAZ 4987/09/22 molex o SAG ANGULAR +1/2 MATERIAL NO, [DOCUMENT NO. SHEET NO, We See DRAFT WHERE APPLICABLEL__oLE CHART SDA-70543-xxxx 4 0F 4 Wt AW <e SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX M1 B WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| 12 10 9 8 7 6 5 4 3 | 2 | 1 Rev. G 2012/01/11