The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. DC to 65 GHz, HV Connector Attenuators HV-AT Series Overview Small, lightweight and low V.S.W.R makes it ideally suited for the widely used high frequency transmission applications. Frequency bandwidth and high reliability is achieved by the use of resistance substrate on the extremely thin board, to form a suspended line. HRS unique resistance substrate design and center conductor connection assures consistent and stable performance in changing temperature environments. Features Applications 1. Low V.S.W.R. * Optical transmission devices * Network analyzers * BERTS (Bit Error Ratio Testing Systems) 1.4 (Typical DC to 65 GHz) 2. Space-saving design Overall dimensions: 9 mm dia. x 24.64 mm long. * FWA (Fixed Wireless Access) * Measurement applications requiring transmission frequencies of up to 65 GHz. 3. Lightweight Total weight: 5.86 g. 4. Mating compatibility Will mate with corresponding V Connector T M or 1.85mm connector. (Note) 5. RoHS compliant All components and materials comply with EU Directive 2002/95/EC. Note: V Connectors is a registered trademark of Anritsu Corporation. Specifications Rating Frequency range Characteristic impedance Power Weight DC to 65GHz 50o 1W CW (At 65c) 5.86g Operating temperature range -10c to +65c Operating relative humidity 90% max. Attenuation (dB) V.S.W.R. (Max) DC~18GHz 18~26.5GHz 26.5~40GHz 40~65GHz DC~18GHz 18~26.5GHz 26.5~40GHz 40~65GHz Part No. 1.35 1.4 RoHS HV-AT(0)-PJ +0.4 00+0.0 00+0.5 +0.0 00+0.8 +0.0 00+1 +0.0 HV-AT(3)-PJ 03+0.6 - 0.4 03+0.7 - 0.4 03+0.9 - 0.4 03+1.5 - 0.4 1.4 1.55 HV-AT(6)-PJ 06+0.7 - 0.3 06+0.8 - 0.3 06+0.9 - 0.3 06+1.5 - 0.3 1.4 1.60 HV-AT(10)-PJ 10+0.3 - 0.7 10+0.4 - 0.7 10+0.6 - 0.7 10+1.5 - 0.7 1.4 1.60 HV-AT(20)-PJ 20+0.7 - 0.3 20+0.9 - 0.3 20+1.1 - 0.3 20+1.3 - 0.3 1.4 1.60 1.55 2006.5 YES 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Item Specification 1.Vibration 2.Shock Conditions No electrical discontinuity of 1s sec. max. Frequency 10 to 55 Hz, single amplitude of 1.5mm, 3 axis, No damage, cracks, or parts dislocation. duration of 2 hours. No electrical discontinuity of 1s sec. max. Acceleration of 490m/s2, sine half-wave waveform, No damage, cracks, or parts dislocation. 3 cycles in each of the 3 axis. Temperature: -55c / 15c to 25c / 125c / 15c to 25c 3.Temperature cycle No damage, cracks, or parts dislocation. Duration (Minutes): 30 / 2 to 3 / 30 / 2 to 3 100 cycles 4.High temperature exposure No damage, cracks, or parts dislocation. 48 hours at 125c 5.Low temperature exposure No damage, cracks, or parts dislocation. 48 hours at -55c 6.Corrosion resistance 5% salt water solution, 48 hours at 35c No corrosion Materials and Finishes Components Shell Coupling Material Finish Stainless steel Passivated Insulator PTFE (Polytetrafluoroethylene) -------- Male contact Brass Gold plated Female contact Berylium copper Gold plated Attenuation element Metal film -------- Ordering information HV - AT ( ) - PJ 1 2 3 4 1 Series name : HV Series 2 AT : Attenuator 3 Attenuation : 0 ... 0 dB 4 Connector type : PJ ... Plug * jack Plug-Jack type Atteuator 8HEX (O9) (24.64) M70.75-6G 2 M70.75-6H The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Typical data 0 20 40 FREQUENCY(GHz) -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 60 0 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 20 40 FREQUENCY(GHz) 60 ATTENUATION(dB) -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 0 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 60 10dB V.S.W.R. ATTENUATION(dB) 6dB 20 40 FREQUENCY(GHz) 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 V.S.W.R. 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 V.S.W.R. 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 ATTENUATION(dB) 3dB V.S.W.R. ATTENUATION(dB) 0dB -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 0 20 40 FREQUENCY(GHz) 60 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 0 20 40 FREQUENCY(GHz) V.S.W.R. ATTENUATION(dB) 20dB 60 BUsage Precautions 1.The center pin contact is 0.511mm diameter. Excersise care when handling the attenuator as NOT to damage or deform this contact. When mating the attenuator with corresponding connector rotate only the hex part. Do not apply axial loads to the center contact or the attenuator body itself. 2. Keep both mating ends free of contamination. If needed, they can be cleaned with alcohol. 3