1190A Coax - CATV Cable For more information please call 1-800-Belden1 See Put-ups and Colors Description: Series 6, 18 AWG solid .040" bare copper-covered steel conductor with Coreguard(R), gas-injected foam polyethylene insulation, with Coreguard(R) and flooding compound, Duobond(R) IV quad shield (60% and 40% coverage), polyethylene jacket. PHYSICAL CHARACTERISTICS: CONDUCTOR: Number of Coax 1 Total Number of Conductors 1 Series Type Series 6 AWG 18 Stranding Solid Conductor Diameter .040 in. Conductor Material BCCS - Bare Copper Covered Steel INSULATION: Insulation Material Gas-injected FPE - Foam Polyethylene Insulation Diameter .180 in. OUTER SHIELD: Outer Shield Material Trade Name Duobond(R) IV Outer Shield Type Tape/Braid/Tape/Braid Outer Shield Material : Layer Number 1 Trade Name Bonded Duofoil(R) Type Tape 2 3 Duofoil(R) Braid Tape Material Bonded Aluminum FoilPolyester Tape-Aluminum Foil AL - Aluminum Aluminum Foil-Polyester Tape-Aluminum Foil AL - Aluminum 4 Braid Outer Shield %Coverage 100 % Outer Shield Flooding Grease CoreGuard(R) OUTER JACKET: Outer Jacket Material PE - Polyethylene OVERALL NOMINAL DIAMETER: Page 1 of 3 % Coverage (%) 100 60 100 40 1190A Coax - CATV Cable Overall Nominal Diameter .298 in. MECHANICAL CHARACTERISTICS: Operating Temperature Range -55C To +80C Bulk Cable Weight 29 lbs/1000 ft. Max. Recommended Pulling Tension 162 lbs. Min. Bend Radius (Install) 3 in. APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE: APPLICABLE STANDARDS: EU CE Mark (Y/N) No EU RoHS Compliant (Y/N) Yes EU RoHS Compliance Date (mm/dd/yyyy): 01/01/2004 SWEEP TEST: Sweep Testing 5 MHz - 1 GHz SUITABILITY: Suitability - Burial Yes PLENUM/NON-PLENUM: Plenum (Y/N) N ELECTRICAL CHARACTERISTICS: Nom. Characteristic Impedance 75 +/- 3 Ohms Nom. Inductance .097 H/ft Nom. Capacitance Conductor to Shield 16.2 pF/ft Nominal Velocity of Propagation 83 % Nominal Delay 1.2 ns/ft Nom. Conductor DC Resistance @ 20 Deg. C 2.8 Ohms/1000 ft Nominal Outer Shield DC Resistance @ 20 Deg.C 4.8 Ohms/1000 ft Minimum Structural Return Loss : Description Frequency (MHz) Start Frequency (MHz) Stop Frequency (MHz) 5 1000 Max. Attenuation : Page 2 of 3 Minimum Structural Return Loss (dB) 20 1190A Coax - CATV Cable Description Frequency (MHz) Start Frequency (MHz) Stop Frequency (MHz) 5 55 211 270 300 350 400 450 550 750 870 1000 Max. Operating Voltage - Non-UL PUT-UPS AND COLORS: Item Description 1190A 0031000 #18 GIFHDLDPE DBL SH PE 1190A 0101000 #18 GIFHDLDPE DBL SH PE Max. Attenuation (dB/100 ft.) 0.67 1.60 2.87 3.24 3.43 3.72 4.00 4.26 4.71 5.59 6.00 6.54 350 V RMS Put-Up (ft.) 1000 Ship Weight (lbs.) 31 Jacket Color ORANGE Notes C 1000 30 BLACK C C = CRATE REEL PUT-UP. Revision Number: 2 Revision Date: 09-07-2006 (c) Copyright 2006 Belden, Inc All Rights Reserved. Although Belden ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. All sales of Belden products are subject to Belden's standard terms and conditions of sale. Belden believes this product to be in compliance with the following environmental regulations: California Proposition 65 Consent Judgment For Wire & Cable Mfgs.(San Francisco Superior Court Nos. 312962 And 320342); EU RoHS (Directive 2002/95/EC, 27-Jan2003);Material manufactured prior to the compliance date may still be in stock at Belden facilities and in our Distributor's inventory. EU ELV (Directive 2000/53/EC, 18-Sept-2000); EU WEEE (Directive 2002/96/EC, 27-Jan-2003); And EU BFR (Directive 2003/11/EC, 6-Feb2003). The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the Product Disclosure, is correct to the best of Belden's knowledge, information and belief at the date of its publication. The information provided in the Product Disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product. Page 3 of 3