ia h Coaxial Cables LDF5-50A | a Cable Ordering Information Attenuation and Average Power Attenuation Attenuation Description Type No. Frequency Average Power ibe Pa dB/100 fi dB/100m ra Standard Cable 7/8" Standard Cable, Standard Jacket LDF5-50A Sos ee one Fire Retardant Cable 15 0.043 0.1441 64.3 7/8" Fire Retardant Jacket (CATVR) LDF5RN-50A 2 0.050 0.164 55.6 Low VSWR and Specialized Cables 10 0.112 0.367 24.6 7/8" Low VSWR, specify operating band LDF5P-50A-(**) 20 0.160 0.525 17.3 Cable for Cellular, standard jacket 30 0.197 0.646 14.0 824-960 MHz, 1.10 VSWR, max. LDF5P-50A-9A 50 0.257 0.843 10.7 Cable for Cellular, fire retardant jacket, (CATVR) 88 0.345 1.13 8.01 824-894 MHz, 1.20 VSWR, max. 41690-75 Qualified to MIL-C-28830/4 202071-2 100 0.369 121 7.49 Phase Stabilized and Phase Measured Cable See page 585 108 0.384 1.26 7.19 150 0.458 1.50 6.04 * Insert suffix number from Low VSWR Specifications table. 174 0.496 1.63 5.58 200 0.535 1.76 5.18 Soft 300 0.666 2.18 4.15 Characteristics 400 0781 2 56 355 450 0.834 2.74 3.32 Impedance, ohms 50 + 1 500 0.883 2.90 3.13 Maximum Frequency, GHz 5.0 512 0.896 2.94 3.09 Velocity, percent 89 600 0.979 3.21 2.83 Peak Power Rating, kW 91 700 1.07 3.50 2.59 dc Resistance, ohms/1000 ft (1000 m) 800 1.15 3.78 2.40 Inner 0.32 (1.05) 824 1.17 3.85 2.36 Outer 0.32 (1.05) 894 1.23 4.03 2.25 dc Breakdown, volts 6000 960 1.28 4.20 2.16 Jacket Spark, volts RMS 8000 1000 1.34 4.30 2.11 Capacitance, pF/ft (m) 22.8 (75.0) 1250 1.49 4.90 1.85 Inductance, pH/ft (m) 0.057 (0.187) 1500 1.66 5.45 1.66 ; 1700 1.79 5.87 1.54 2000 1.97 6.46 1.40 Outer Conductor Copper 2300 2.15 7.05 1.29 Inner Conductor Copper 3000 2.53 8.31 1.09 Diameter over Jacket, in (mm) 1.09 (28) 4000 3.03 9.94 0.914 Diameter over Copper Outer Conductor, in (mm) 0.98 (24.9) 5000 3.50 14.5 0.792 Diameter Inner Conductar, in (mm) 0.355 (4.0) Standard Gonaii Nominal Inside Transverse Dimensions, em 21 For Attenuation. VSWR 1.0 ambient temperature 24C (75F). Minimum Bending Radius, in (mm) 10 (250) For Average Power, VSWR 1.0, ambient temperature 40C (104F}, inner Number of Bends, minimum (typical) 15 (50) conductor temperature 100C (212F), no solar loading. Bending Momert, lb-ft (Nem) 12 (16.3) Cable Weight, lb/ft (kg/m) 0.33 (0.49) Tensile Strength, lb (kg) 325 (147) Flat Plate Crush Strength, Ib/in (kg/mm) 80 (1.4) * A 75-ohm 7/8" diameter cable is available. Contact Andrew for further information. ANDRE WwW. U.K. 0800-250055 * Republic of Ireland 1-800-535358 Australia 1800-803 219 = * New Zealand 0800-441-747 465oe ee Coaxial Cables ree 8 laa y 1) L5PDF-RC eS yur : - Fem ede 7 ey esl i : ar ae ad late Comic l UHF Female ed Connectors 7s Previous Type Inner Contact Outer Contact Plating Max. Length Max. Dia. Taare Description Number Number Attachment PNacrocil Code in (mm) N Male L5NM L45W Self-Tapping Self-Flare BB 2.8 (71) 1.4 (36) N Male L5PNMt L45PW Self-Tapping Self-Flare SG 2.8 (71) 1.4 (36) N Male Hex Head L5PNN-H Self-Tapping Self-Flare SG 3.0 (76) 1.36 (34.5) N Female L5NF L45N Self-Tapping Self-Flare BB 2.8 (71) 1.4 (36) N Female L5PNFT L454PN Self-Tapping Self-Flare SG 2.8 (71) 1.4 (36) 7-16 DIN Male L5PDMt L45ADM Self-Tapping Self-Flare ss 2.6 (66) 1.4 (36) 7-16 DIN Male Right Angle L5PDRt L45ADM-RA _ Self-Tapping Self-Flare Ss 3.3/2.5 (85/64) 1.4 (36) 7-16 DIN Female L5PDFt L45PDF Self-Tapping Self-Flare ss 2.7 (69) 1.4 (36) 7-16 DIN Female Bulkhead L5PDF-BH L45ADF-BH Self-Tapping Self-Flare ss 2.7 (69) 1.9 (47) 7-16 DIN Female Panel Mount L5PDF-PM Self-Tapping Self-Flare ss 2.7 (69) 1.35 (34.4) 7-16 DIN Female Ring Flare L5PDF-RCt Captivated Ring-Flare ss 2.9 (74) 1.36 (34.5) 7/8" EIA Flange L45R Self-Tapping Self-Flare BB 3.3 (84) 2.25 (57) 7/8" ElA Flange Right Angle 124800-1 Self-Tapping Self-Flare BB 3.9/1.3 (99/33) 2.25 (57) F Flange Male L45F Self-Tapping Self-Flare BB 1.8 (46) 2.25 (57) F Flange Female 48041 Self-Tapping Self-Flare BB UHF Male L45P Self-Tapping Self-Flare BS 2.7 (69) 1.4 (36) UHF Female L45U Self-Tapping Self-Flare BS 2.7 (69) 1.4 (36) LC Male L45M Self-Tapping Self-Flare BB 3.7 (94) 1.4 (36) LC Female L45L Self-Tapping Self-Flare BB 3.4 (86) 1.4 (36) HN Male L45J Self-Tapping Self-Flare BB 3.0 (76) 1.4 (36) End Terminal L45T Self-Tapping Self-Flare BB 4.9 (124) 1.4 (36) Splice L452 Self-Tapping Self-Flare BB 3.3 (84) 1.5 (38) + See page 570 for bulk packs. Plating Codes: BB - Brass Body and Pin, BS - Brass Body and Silver Plated Pin, SG - Silver Plated Body and Gold Plated Pin, SS - Silver Plated Body and Pin Connector Accessories Type Number Connector Pin-Paks, five replacement pins For LSNM 43158-5 For LSPNM, L5PNM-H 241495 For L5NF 43157-2 For LSPNF 241092 For LSPDM 114105 For LSPDF and LSPDF-BH 114105-2 Connector Reattachment Kit for L45 Series 34767A-28 Bulkhead Adapter, for N or UHF Females 26016-2 466 ANDREW. Customer Service Center - Call toll-free from: * U.S.A., Canada and Mexico 1-800-255-1479HELIAX Coaxial Cables Low VSWR Specifications, Type LDF5P-50A-( ) Assembly VSWR. Maximum (R.L., dB) Above Frequency 1-25 ft Perel Oia 100-200 ft 200-500 ft 500 ft SF-Tale Clara Using Connector Type" (0.3-8 m) (ECU aD (Tt LUM) (60-150 m) (150 m) 0.824-0.960 LDF5P-50A-9A _ Type N: L5NM, L5NF, L5SPNM, L5PNF 1.06 (30.7) 1.07 (29.4) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 7/8" ElA: L45R 1.06 (30.7) 1.07 (29.4) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 7-16 DIN: L5PDM, L5PDF 1.06 (30.7) 1.07 (29.4) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) F Flange: L45F 1.06 (30.7) 1.07 (29.4) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) LC: L45M 1.08 (28.3) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 0.824-0.960 LDF5P-50A-16A _N Malest 1.10 (26.4) 1.12 (24.9) 1.13 (24.2) 1.15 (23.1) 1.15 (23.1) and N Females + 1.10 (26.4) 1.12 (24.9) 1.13 (24.2) 1.15 (23.1) 1.15 (23.1) 1.85-1.99 7-16 DIN Males t 1.10 (26.4) 1.12 (24.9) 1.13 (24.2) 1.15 (23.1) 1.15 (23.1) 7-16 DIN Females t 1.10 (26.4) 1.12 (24.9) 1.13(24.2) 1.15 (23.1) 1.15 (23.1) 1.38-1.540 LDFS5P-50A-11A Type N: LSNM, L5NF, LSPNM, L5PNF 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.15 (23.1) 1.15 (23.1) 7/8" EIA: L45R 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.15 (23.1) 1.15 (23.1) 7-16 DIN: L5PDM, L5PDF 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.15 (23.1) 1.15 (23.1) F Flange: L45F 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.15 (23.1) 1.15 (23.1) 1.60-2.3 LDF5P-50A-12A Type N Male: LSNM, LSPNM 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) Type N Female: L5NF, LSPNF 1.12 (24.9) 1.12 (24.9) 1.12 (24.9) 1.12 (24.9) 1.12 (24.9) 7/8" EIA: L45R 1.08 (28.3) 1.08 (28.3) 1.10(26.4) 1.10 (26.4) 1.10 (26.4) 7-16 DIN: LSPDM, L5PDF 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) F Flange: L45F 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 2.3-2.7 LDF5P-50A-13A Type N Male: LSNM, LSPNM 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.15 (23.1) 1.15 (23.1) Type N Female: L5NF, LSPNF 15 (23.1) 1.15 (23.1) 1.45 (23.1) 1.18 (21.6) 1.18 (21.6) 7/8" EIA: L45R 10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.15 (23.1) 1.15 (23.1) 7-16 DIN: L5PDM, L5PDF 10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.15 (23.1) 1.15 (23.1) F Flange: L45F 10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.15 (23.1) 1.15 (23.1) 0.01-1.0 LDF5P-50A-5A Type N: LSNM, L5NF, LSPNM, L5PNF 10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.20 (20.8) 1.30 (17.7) 7/8" EIA: L45R 10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.20 (20.8) 1.30 (17.7) 7-16 DIN: LSPDM, L5PDF 10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.20 (20.8) 1.30 (17.7) LC: L45M 10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.20 (20.8) 1.30 (17.7) 1 1 1 1 1 1 1 1 1.7-4.2 LDF5P-50A-7A Type N Male: LSNM, LSPNM 1.10 (26.4) 1.15 (23.1) 1.20(20.8) 1.20 (20.8) 1.20 (20.8) Type N Female: L5NF, LSPNF 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.25 (19.1) 1.25 (19.1) 7/8" EIA: L45R 1.15 (23.1) 1.20 (20.8) 1.20(20.8) 1.25 (19.1) 1.25 (19.1) 7-16 DIN Male: LSPDM 1.10 (26.4) 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 7-16 DIN Female: L5PDF 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.25 (19.1) 1.25 (19.1) 1 1 1 0.01-4.2 LDF5P-50A-14A = Type N Male: LSNM, L5PNM 10 (26.4) 1.20 (20.8) 1.30(17.7) 1.35 (16.5) 1.35 (16.5) Type N Female: LSNF, LSPNF -15 (23.1) 1.20 (20.8) 1.30(17.7) 1.35 (16.5) 1.35 (16.5) 7/8" ElA: L45R 15 (23.1) 1.20 (20.8) 1.30(17.7) 1.35 (16.5) 1.35 (16.5) 7-16 DIN Male: LSPDM 1.10 (26.4) 1.20 (20.8) 1.30(17.7) 1.35 (16.5) 1.35 (16.5) 7-16 DIN Female: LSPDF 1.15 (23.1) 1.20 (20.8) 1.30 (17.7) 1.35 (16.5) 1.35 (16.5) LC: L45M 1.25 (19.1) 1.30(17.7) 1.380(17.7) 1.35 (16.5) 1.35 (16.5) 0.01-5.0 LDF5P-50A-15A = Type N: L5NM, L5NF, LSPNM, LSPNF 1.15 (23.1) 1.20 (20.8) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 7/8" ElA: L45R 1.30 (17.7) 1.30 (17.7) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 7-16 DIN Male: LSPDM 1.15 (23.1) 1.20 (20.8) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 7-16 DIN Female: LSPDF 1.30 (17.7) 1.30 (17.7) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) * Connectors ordered separately. + Does not apply for right angle connectors. VSWR values are guaranteed for factory fit assemblies and are typical for field cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed. OuDRE W. * U.K. 0800-250055 = * Republic of Ireland 1-800-535358 Australia 1800-803 219 = * New Zealand 0800-441-747 jo A67Accessories Photos and descriptions on pages 544-572 Description Type No. Hangers and Adapters - for more hangers and adapters see pages 547-557 Standard Hangers and Adapters Standard Hanger Kit of 10. Standard tower configuration spacing is 3-4 feet (1-1.2 m). Recommended maximum spacing for outdoor installation is 5.5 ft (1.68 m) at 125 mph (200 km/h) wind, 1/2" (13 mm) radia! ice. For different wind and ice loading spacing recommendations, refer to Cable Hanger Spacing, page 547. Hardware Kit of 10, 3/8" bolts, lock washers, nuts 3/4" (19 mm) long 1" (25) mm long Angle Adapter, kit of 10. Stainless Steel Galvanized Galvanized, metric hardware Round Member Adapter Kit of 10. Stainless steel Member Diameter, in (mm) 1-2 (25-50) 2-3 (50-75) 3-4 (75-100) 4-5 (100-125) 5-6 (125-150) 6-8 (150-200) Snap-In Hangers and Adapters Snap-In Hanger Kit of 10. For prepunched 3/4 in (19 mm) holes on tower members or adapters below. Standard tower configuration spacing is 3-4 feet (1-1.2 m). Recommended maximum spacing for outdoor installation is 1.5 ft (0.46 m) at 125 mph (200 km/h) wind, 1/2" (143 mm) radial ice. For different wind and ice loading spacing recommendations, refer to Cable Hanger Spacing, page 547. Tower Hanger/Adapter, attaches to existing angle tower members 1 cable run, 1 connection required 4 cable runs, 2 connections required 8 cable runs, 3 connections required J-Bolt Hardware Kit of 10 for use with Tower/Hanger Adapter Hanger Blox Kit of 3. Injection molded plastic, stackable. 4 runs per unit; 12 runs per bundle. Standard tower configuration spacing is 3-4 feet (1-1.2 m). Recommended maximum spacing for outdoor installation is 6 ft (1.83 m) at 125 mph (200 km/h) wind, 1/2" (13 mm) radial ice, bolted to tower. For different wind and ice loading spacing recommendations, refer to Cable Hanger Spacing, page 547 See page 557 for supporting accessories. Hanger Blox Hardware Kit. Starter Kit Extender Kit Insulated Hangers and Adapters - please refer to pages 554-555. Support/Hoisting Grip. Use at 200 ft (60 m) intervals. Grip with one clamp Support clamp kit of 10 Installation tool with 10 support clamps Hoisting Grip Grounding and Surge Protection - for more information, see pages 559-564. SureGround Grounding Kit, with tape weatherproofing kit. factory attached, one-hole lug, 600 mm tead factory attached, two-hole lug, 600 mm lead field attachable crimp-on, one-hole lug, 1000 mm lead field attachable crimp-on, two-hole lug, 1000 mm lead 42396A-5 31769-5 31769-1 31768A 242774 242774-M 31670-1 31670-2 31670-3 31670-4 31670-5 31670-6 206706-2 206929-1 206929-4 206929-8 206930 HB-5 HBSH-456 HBEH-456 L5SGRIP L5SGRIP-51K L5SGRIP-51KT 19256B SGL5-06B1 SGL5-06B2 SGL5-10B3 SGL5-10B4 Description Type No. Grounding Kit factory attached, one-hole lug, 24 in (610 mm) lead 204989-2 factory attached, two-hole lug, 24 in (610 mm) lead 241088-2 field attachable crimp-on, one-hole tug, 36 in (915 mm) lead 204989-22 field attachable crimp-on, two-hole lug, 36 in (915 mm) lead 241088-7 Crimping Tool to field attach lug to Grounding Kit 207270 Arrestor Plus Lightning Surge Protector Connector/surge protector. APPL5-#-* #,* Interface and frequency band information. See page 562 for details and more interface types. Arrestor Plus T-Series Lightning Surge Protector Connectors on each end (universal version). Non-directional APT-#-* #,* Interface and frequency band information. See page 563 for details. Gas Tube Surge Arrestor Connectors on each end (universal version). Directional, dc pass capability SA-#-* #,* Interface and frequency band information. See page 564 for details. Weatherproofing - for more information, see page 565. Cold Shrink Weatherproofing Kit 7/8" Coax-Type N to 1/2" Coax-Type N 241475-1 7/8" Coax-Type N to 7/8" Coax-Type N 241474-5 1-1/4" or 1-5/8" Coax-Type N to 7/8" Coax-Type N 241475-3 7/8" Coax-7-16 DIN to 1/2" LDF4 - 7-16 DIN 241475-4 7/8" Coax-7-16 DIN to 1/2" FSJ4 - 7-16 DIN 241475-6 AAPLS to 7/8" LDF5-50A 241474-5 7/8" Coax-Type N to Antenna Output 241548-5 FSJ2-LDF5 241475-10 Connector/Splice Weatherproofing Kit 221213 Entry Systems - for more information, see pages 566-567. Wall/Roof Feed-Thru 40656A-1 Feed-Thru Plates and Boots. Order separately. Plates Plates Openings For 4 in Boots For 5 in Boots 1 204673-1 48940-1 1 204673-2 2 48940-2 3 48940-3 4 204673-4 48940-4 6 48940-6 8 204673-8 12 204673-12 4 in Boots 5 in Boots One Hole: 204679-2 48939-1 Three Hole: 204679-15 48939-2 ArrestorPort Plus, Wail entry plate and integrated ground bar assembly. Use with Arrestor Plus surge protector series. Available in many configurations see page 562. for available options and ordering information. * Number of surge arrestor openings in the plate. ** Number of cable feed thru ports at the top. Tools - for more tools see page 569. EASIAX Cutting Tool Cable Flare Tool Installer Pax, Bulk packs are available for some hangers, adapters, grounding kits and cold shrink weatherproofing kits. See page 570. APPORT-(*)-(**) 222951 224368 eo 468 ANDREW. Customer Service Center - Call toll-free from: U.S.A., Canada and Mexico 1-800-255-1479