SPEC NO: DSAF2725 REV NO: V.2 DATE: APR/26/2005 PAGE: 1 OF 5
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000144-01
SURFACE MOUNT DISPLAY
Features
0.3 INCH DIGIT HEIGHT.
LOW CURRENT OPERATION.
EXCELLENT CHARACTER APPEARANCE.
I.C. COMPATIBLE.
MECHANICALLY RUGGED.
GRAY FACE,WHITE SEGMENT.
PACKAGE : 1100PCS / REEL.
RoHS COMPLIANT.
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
APSC03-41SRWA-F01 SUPER BRIGHT RED
Description
The Super Bright Red source color devices are made
with Gallium Aluminum Arsenide Red Light Emitting
Diode.
SPEC NO: DSAF2725 REV NO: V.2 DATE: APR/26/2005 PAGE: 2 OF 5
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000144-01
Selection Guide
Part No. Dice Lens Type Iv (ucd)
@ 10 mA
Min. Typ.
APSC03-41SRWA-F01 SUPER BRIGHT RED (GaAlAs) WHITE DIFFUSED 1900 7657 Common Cathode, Rt.
Hand Decimal.
Description
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Parameter Super Bright Red Units
Power dissipation 100 mW
DC Forward Current 30 mA
Peak Forward Current [1] 155 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Super Bright Red 660 nm IF=20mA
λDDominant Wavelength Super Bright Red 640 nm IF=20mA
∆λ1/2 Spectral Line Half-width Super Bright Red 20 nm IF=20mA
C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz
VFForward Voltage Super Bright Red 1.85 2.5 V IF=20mA
IRReverse Current Super Bright Red 10 uA VR = 5V
SPEC NO: DSAF2725 REV NO: V.2 DATE: APR/26/2005 PAGE: 3 OF 5
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000144-01
Super Bright Red APSC03-41SRWA-F01
SPEC NO: DSAF2725 REV NO: V.2 DATE: APR/26/2005 PAGE: 4 OF 5
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000144-01
APSC03-41SRWA-F01
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Reel Dimension
SPEC NO: DSAF2725 REV NO: V.2 DATE: APR/26/2005 PAGE: 5 OF 5
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000144-01
PACKING & LABEL SPECIFICATIONS APSC03-41SRWA-F01
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
