SINGLE-IN-LINE SOCKETS
Low Profile Carriers
Single and Double Row
www.mill-max.com 516-922-6000
57
Series 714...00X
Ordering Information
Single Row (1,4 min. mounting hole)
714-XX-1_ _-41-001000
Double Row (1,4 min. mounting hole)
714-XX-2_ _-41-001000
Single Row (0,99 min. mounting hole)
714-XX-1_ _-31-007000
Double Row (0,99 min. mounting hole)
714-XX-2_ _-31-007000
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Specify # of pins 01-64
Specify # of pins 02-64
Specify # of pins 01-64
Specify # of pins 02-64
• Low profile receptacles sit 0,79
above board.
•Series 714 uses M-M# 1401 &
1407 pin receptacles.
See page 126 for details.
•Hi-Rel 4-finger BeCu #30 contact
is used in the 1401 receptacle and
a #11 contact is used in the 1407.
Both are rated at 3 amps. See
pages 206 & 208 for details.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
SPECIFY PLATING CODE XX= 1 3 9 1 9 3 9 9 4 1 4 3 4 4
Sleeve (Pin)
Contact (Clip)
200µ” Sn/Pb 200µ”Sn
10µ” Au 10µ” Au
XX=Plating Code
See Below
For RoHS compliance,
select plating code.
For the all gold option
(XX=13) also change
part number from
71X-XX-XXX-X1-00X000
to
71X-13-XXX-X1-00X100
0,38 0,53
0,25 0,46
0,25µm Au
0,76µm Au 0,76µm Au
5,08µm Sn/Pb 5,08µm Sn/Pb
5,08µm Sn/Pb 0,76µm Au
5,08µm Sn 5,08µm Sn
5,08µm Sn
0,25µm Au
0,76µm Au 0,76µm Au
5,08µm Sn/Pb 5,08µm Sn/Pb
5,08µm Sn/Pb 0,76µm Au
5,08µm Sn 5,08µm Sn
5,08µm Sn
1,4
0,97
0,79
2,11
3,23 3,71
0,38 0,53
0,25 0,46
1,4
0,97
0,79
2,11
3,23 3,71
0,38 0,64
0,25 0,46
1,83
1,35
0,79
2,44 3,68 4,19
2,54
2,54
2,54 5,08
0,38 0,64
0,25 0,46
1,83
1,35
0,79
2,44 3,68 4,19
2,54
2,54
2,54
