Transient Voltage Suppression Diodes Axial Leaded - 5000W RoHS 5KP Series Description The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features t 3P)4DPNQMJBOU t 5ZQJDBMNBYJNVN temperature coefficient VBR = 0.1% x VBR@25C t (MBTTQBTTJWBUFEDIJQ KVODUJPOJO1QBDLBHF t 8QFBLQVMTF capability at 10x1000s waveform, repetition rate (duty cycles):0.01% t 'BTUSFTQPOTFUJNF typically less than 1.0ps from 0 Volts to BV min t &YDFMMFOUDMBNQJOH capability t -PXJODSFNFOUBMTVSHF resistance Agency Approvals AGENCY AGENCY FILE NUMBER E128662/E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit PPPM 5000 W PD 8.0 W IFSM 400 A VF 3.5/5.0 V TJ , TSTG -55 to 175 C Typical Thermal Resistance Junction to Lead RuJL 8.0 C/W Typical Thermal Resistance Junction to Ambient RuJA 40 C/W Peak Pulse Power Dissipation by 10x1000s test waveform (Fig.1) (Note 1) Steady State Power Dissipation on inifinite heat sink at TL=75C (Fig. 5) Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional only (Note 2) Maximum Instantaneous Forward Voltage at 100A for Unidirectional only (Note 3) Operating Junction and Storage Temperature Range t 5ZQJDBM*R less than 2A above 12V t )JHIUFNQFSBUVSF soldering guaranteed: 260C/40 seconds / w NN MFBE length, 5 lbs., (2.3kg) tension t 1MBTUJDQBDLBHFIBT Underwriters Laboratory Flammability classification 94V-O t .BUUF5JO-FBEoGSFF plated Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. 3. VF<3.5V for devices of VBR < _ 200V and VF<5.0V for devices of VBR > _ 201V. www.littelfuse.com (c)2007 Littelfuse 84 5KP Series Specifications are subject to change without notice. Transient Voltage Suppression Diodes Axial Leaded - 5000W Electrical Characteristics Part Number (Uni) Part Number (Bi) Reverse Stand off Voltage VR (Volts) 5KP5.0A 5KP6.0A 5KP6.5A 5KP7.0A 5KP7.5A 5KP8.0A 5KP8.5A 5KP9.0A 5KP10A 5KP11A 5KP12A 5KP13A 5KP14A 5KP15A 5KP16A 5KP17A 5KP18A 5KP20A 5KP22A 5KP24A 5KP26A 5KP28A 5KP30A 5KP33A 5KP36A 5KP40A 5KP43A 5KP45A 5KP48A 5KP51A 5KP54A 5KP58A 5KP60A 5KP64A 5KP70A 5KP75A 5KP78A 5KP85A 5KP90A 5KP100A 5KP110A 5KP120A 5KP130A 5KP150A 5KP160A 5KP170A 5KP180A 5KP190A 5KP200A 5KP210A 5KP220A 5KP250A 5KP5.0CA 5KP6.0CA 5KP6.5CA 5KP7.0CA 5KP7.5CA 5KP8.0CA 5KP8.5CA 5KP9.0CA 5KP10CA 5KP11CA 5KP12CA 5KP13CA 5KP14CA 5KP15CA 5KP16CA 5KP17CA 5KP18CA 5KP20CA 5KP22CA 5KP24CA 5KP26CA 5KP28CA 5KP30CA 5KP33CA 5KP36CA 5KP40CA 5KP43CA 5KP45CA 5KP48CA 5KP51CA 5KP54CA 5KP58CA 5KP60CA 5KP64CA 5KP70CA 5KP75CA 5KP78CA 5KP85CA 5KP90CA 5KP100CA 5KP110CA 5KP120CA 5KP130CA 5KP150CA 5KP160CA 5KP170CA 5KP180CA 5KP190CA 5KP200CA 5KP210CA 5KP220CA 5KP250CA 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 160.0 170.0 180.0 190.0 200.0 210.0 220.0 250.0 Breakdown Voltage VBR (Volts) @ IT MIN MAX Test Current IT (mA) 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.00 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 110.00 122.00 133.00 144.00 167.00 178.00 189.00 200.00 211.00 222.00 233.00 244.00 277.00 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 197.00 209.00 221.00 233.00 246.00 258.00 270.00 306.00 50 50 50 50 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Maximum Clamping Voltage VC @ IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage I R @ VR ( A) 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 292.0 310.0 329.2 349.5 371.1 425.0 554.3 495.1 455.4 425.0 395.3 375.0 354.2 331.2 300.0 280.2 256.3 237.2 219.8 209.0 196.2 184.8 174.7 157.4 143.7 131.1 121.1 112.3 105.4 95.7 87.8 79.1 73.5 70.2 65.9 61.9 58.6 54.5 52.7 49.5 45.1 42.1 40.5 37.2 34.9 31.5 28.8 26.4 24.4 21.0 19.7 18.5 17.5 16.5 15.5 14.6 13.7 12.0 5000 5000 2000 1000 250 150 50 20 15 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Agency Approval X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X For bidirectional type having VR of 10 volts and less, the IR limit is double. For parts without A , the VBR is 10% and VC is 5% higher than with A parts 5KP Series Specifications are subject to change without notice. 85 www.littelfuse.com (c)2007 Littelfuse Transient Voltage Suppression Diodes Axial Leaded - 5000W Ratings and Characteristic Curves (T =25C unless otherwise noted) A Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve 100 100 Non-repetitive pulse Peak Pulse Power (kW) PPPM - Peak Pulse Power (kW) waveform shown in Fig.3 TA=25C 10 1 0.1 0.1s 75 50 25 0 1.0s 10s 100s 1.0ms 0 10ms td - Pulse Width (sec.) 10000 Half Value IPPM IPPM ( ) 10/1000sec. Waveform as defined by R.E.A 10 td 1.0 2.0 1000 Bi-directional @ VR 100 2 50 0 Uni-directional V=0V Uni-directional @ VR Cj (pF) IPPM- Peak Pulse Current, % IRSM 125 150 175 200 Bi-directional V=0V TJ=25C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 3.0 Tj=25C f=1.0MHz Vsig=50mVp-p 1 1.0 4.0 10.0 100.0 1000.0 VBR - Reverse Breakdown Voltage (V) Figure 6 - Maximum Non-Repetitive Peak Forward Surge Current Figure 5 - Steady State Power Derating Curve 9 450 8 IFSM, Peak Forward Surge Current (A) Steady State Power Dissipation (W) 100 100000 tr=10sec t-Time (ms) 7 6 5 4 3 L = 0.375" (9.5mm) Lead Lengths 2 1 0 0 25 50 75 100 125 150 175 400 350 300 250 200 150 100 50 0 200 1 TL - Lead Temperature(C) (c)2007 Littelfuse 75 Figure 4 - Typical Junction Capacitance 150 www.littelfuse.com 50 TA - Ambient Temperature (C) Figure 3 - Pulse Waveform 0 25 10 100 Number of Cycles at 60 Hz 86 5KP Series Specifications are subject to change without notice. Transient Voltage Suppression Diodes Axial Leaded - 5000W Soldering Parameters Reflow Condition -FBEoGSFFBTTFNCMZ Pre Heat Ramp-up 150C - Temperature Max (Ts(max)) 200C - Time (min to max) (ts) oTFDT Average ramp up rate (Liquidus Temp (TL) to peak 3C/second max TS(max) to TL - Ramp-up Rate 3C/second max Reflow Critical Zone TL to TP TL Temperature (T) - Temperature Min (Ts(min)) tp TP tL Ts(max) Ramp-down Ts(min) ts Preheat 25C - Temperature (TL) (Liquidus) 217C - Time (min to max) (ts) oTFDPOET t 25C to Peak Time (t) Peak Temperature (TP) 260+0/-5 C Time within 5C of actual peak Temperature (tp) oTFDPOET Flow/Wave Soldering (Solder Dipping) Ramp-down Rate 6C/second max Peak Temperature : 265OC Time 25C to peak Temperature (TP) 8 minutes Max. Dipping Time : 10 seconds Do not exceed 280C Soldering : 1 time Physical Specifications Environmental Specifications Weight 0.07oz., 2.1g Temperature Cycle +&4%" Case P600 molded plastic body over QBTTJWBUFEKVODUJPO Pressure Cooker +&4%" Polarity Color band denotes the cathode except Bipolar. High Temp. Storage +&4%" Terminal Matte Tin axial leads, solderable per +&4%#% HTRB +&4%" Thermal Shock +&4%" Dimensions D Dimensions C A B A Inches Millimeters Min Max Min Max A 1.000 - 25.40 - B 0.340 0.360 8.60 9.10 C 0.048 0.052 1.22 1.32 D 0.340 0.360 8.60 9.10 P600 5KP Series Specifications are subject to change without notice. 87 www.littelfuse.com (c)2007 Littelfuse Transient Voltage Suppression Diodes Axial Leaded - 5000W Part Numbering System 5KP Part Marking System XXX C A Cathode Band 5KPXXX 5% VOLTAGE TOLERANCE BI-DIRECTIONAL STAND OFF VOLTAGE F SERIES Option: Suffix B is for bulk packing. Littelfuse Logo Product Type Packaging Component Package Quantity Packaging Option 5KPxxxXX P600 800 Tape & Reel 5KPxxxXXB P600 500 BOX Part Number www.littelfuse.com (c)2007 Littelfuse Packaging Specification &*"45%34& Littelfuse Concord Packing Spec. DM-0016 88 5KP Series Specifications are subject to change without notice.