!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. O95E9.pdf 03.7.7 Dielectric Resonators (RESOMICSr) DIELECTRIC RESONATORS (RESOMICSr) Murata Manufacturing Co., Ltd. Cat.No.O95E-9 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please O95E9.pdf 03.7.7 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CONTENTS 1 RESOMICSr and "RESOMICS" in this catalog are the trademarks of Murata Manufacturing Co., Ltd. 2 Part Numbering 2 Dielectric Resonator (RESOMICSr) Features/Applications/Characteristics 6 Dielectric Element/Configuration 8 Reference Data 9 1 Dielectric Resonator U Series (DRD Type) 10 2 Dielectric Resonator U Series (DRT Type) 12 3 Dielectric Resonator M Series (DRD Type) 13 4 Dielectric Resonator M Series (DRT Type) 15 5 Dielectric Resonator M Series (DRU Type) 16 6 Dielectric Resonator M Series (DRY Type) 17 7 Dielectric Resonator V Series (DRD Type) 18 8 Dielectric Resonator V Series (DRT Type) 19 9 Dielectric Resonator R Series (DRD Type) 20 10 Dielectric Resonator R Series (DRT Type) 21 11 Dielectric Resonator B Series (DRD Type) 22 12 Dielectric Resonator B Series (DRT Type) 23 13 Dielectric Resonator E Series (DRD Type) 24 14 Dielectric Resonator E Series (DRT Type) 25 15 Dielectric Resonator F Series (DRD Type) 26 16 Dielectric Resonator F Series (DRT Type) 27 17 Support of Dielectric Resonator Z Series (DRZ Type) 28 TE Mode Resonator/Support for Resonator Notice 30 19 Dielectric Resonator P Series (DRR Copper Plated Type) 32 20 Dielectric Resonator K Series (DRR Silver Plated Type) 34 21 Dielectric Resonator U Series (DRR Silver Plated Type) 35 Dielectric Resonator Substrates 5 6 7 8 9 10 12 13 14 15 16 17 29 Dielectric Resonator K Series (DRR Copper Plated Type) 22 4 11 18 TEM Mode Resonator (DRR Copper Plated Type) Notice 3 36 38 Recycled Paper 18 19 20 21 22 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. o Part Numbering Dielectric Resonators (RESOMICSr) TE Mode (Part Number) DR D q w 055 0244 M 20 e r t y u i o B 00 T qProduct ID Ex.) Product ID DR yResonant Frequency Temperature Characteristics (f) Expressed by two figures or combination of a letter and a figure. Dielectric Resonators (RESOMICSr) Code Resonant Frequency Temperature Characteristics (f) wProduct E0 -4ppm/C D0 -3ppm/C Code Product C0 -2ppm/C D TE Mode (Disc Type) B0 -1ppm/C T TE Mode (Coaxial Cylinder Type) 00 0ppm/C 10 1ppm/C 20 2ppm/C eOuter Diameter Code Outer Diameter 30 3ppm/C 055 Expressed by three figures. The unit is 1/10mm. 40 4ppm/C 50 5ppm/C 60 6ppm/C rThickness Code Thickness 70 7ppm/C 0244 Expressed by four figures. The unit is 1/100mm. 80 8ppm/C 90 9ppm/C P0 10ppm/C tMaterials Code Materials f Range U U Series -4ppm/C to +10ppm/C M M Series 0ppm/C to +6ppm/C V V Series 0ppm/C to +8ppm/C R R Series B B Series E F uResonant Frequency Temperature Characteristics (f) Tolerance Code Resonant Frequency Temperature Characteristics (f) Tolerance 0ppm/C to +6ppm/C Z 2 ppm/C 0ppm/C to +6ppm/C A 1 ppm/C E Series 0ppm/C to +6ppm/C B 0.5ppm/C F Series 0ppm/C to +4ppm/C E and F series : Tolerance of Frequency Temperature Coefficient can be chosen only by "Z" code (2ppm/C) and "A" code (1ppm/C) iIndividual Specification Code (Serial) Code Individual Specification Code (Serial) 00 Standard Type oPackaging Code Packaging T Tray R Taping Dielectric Resonators (RESOMICSr) TE Mode Support (Part Number) DR Z 001 q w e Z T r t qProduct ID Product ID DR eIndividual Specification Code (Serial) Code Individual Specification Code (Serial) 001 Serial code Dielectric Resonators (RESOMICSr) rMaterials wProduct Code Product Z TE mode (Support Type) Code Materials Z Z series tPackaging 2 Code Packaging T Tray O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) TE Mode [Mono-Block Type] (Part Number) DR U q w 051 10G32 M 30 e r t y u i o B 00 yResonant Frequency Temperature Coefficient (f) qProduct ID Expressed by two figures or combination of a letter and a figure. Product ID DR T Dielectric Resonators (RESOMICSr) Ex.) Code Resonant Frequency Temperature Coefficient (f) wProduct E0 -4ppm/C Code Product D0 -3ppm/C U TE Mode (Mono-Block Type with no hole) C0 -2ppm/C Y TE Mode (Mono-Block Type with hole) B0 -1ppm/C 00 0ppm/C 10 1ppm/C eOuter Diameter Code Outer Diameter 20 2ppm/C 051 Expressed by three figures. The unit is 1/10mm. 30 3ppm/C 40 4ppm/C rNominal Center Frequency 50 5ppm/C Expressed by five figures. If the unit is "GHz", a decimal point is expressed by capital letter "G". 60 6ppm/C 70 7ppm/C Ex.) Code Nominal Center Frequency 80 8ppm/C 10G32 10.32GHz 90 9ppm/C P0 10ppm/C tMaterials Code Materials M M Series uResonant Frequency Temperature Coefficient (f) Tolerance Code Resonant Frequency Temperature Coefficient (f) Tolerance Z 2ppm/C A 1ppm/C B 0.5ppm/C iIndividual Specification Code (Serial) Code Individual Specification Code (Serial) 00 Standard Type oPackaging Code Packaging T Tray R Taping 3 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) TEM Mode (Part Number) DR R q w 020 1G590 e r K T C 00 yWave Length qProduct ID Product ID DR T t y u i o Dielectric Resonators (RESOMICSr) Code Wave Length T /4 P /2 wProduct Code Product R TEM Mode eOuter Dimension uElectrode Code Electrode C Copper S Silver Code Outer Dimension 020 2.0g2.0mm 030 3.0g3.0mm Code Individual Specification Code (Serial) 040 4.0g4.0mm 00 Standard 060 6.0g6.0mm iIndividual Specification Code (Serial) oPackaging rNominal Center Frequency Code Expressed by five figures. If the unit is "MHz", it is expressed by three figures plus "M". If the unit is "GHz", a decimal point is expressed by capital letter "G". Ex.) Code Nominal Center Frequency 900M0 900MHz 1G200 1200MHz tMaterials 4 Code Materials U U Series K K Series P P Series Packaging T Tray R Taping O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Microwave Dielectric Substrate (Part Number) DR P 508 0127 U N0 G q w e r t y u i o !0 C 00 qProduct ID yDielectric Constant Temperature Characteristics () Expressed by two figures or combination of a letter and a figure. Product ID DR T Dielectric Resonators (RESOMICSr) wProduct Code Product P Substrate eSide Length Code Side Length 508 Expressed by three figures. The unit is 1/10mm. Code Dielectric Constant Temperature Characteristics () N0 -30ppm/ C uDielectric Constant Temperature Characteristics () Tolerance Code Dielectric Constant Temperature Characteristics () Tolerance G 30ppm/ C iSurface Roughness rThickness Code Average Surface Roughness Ra (m) Code Thickness C 0.1 to 0.8 0127 Expressed by four figures. The unit is 1/100mm. D 0.05 to 0.40 F 0.004 to 0.040 tMaterial oIndividual Specification Code (Serial) Code Materials U U series Code Individual Specification Code (Serial) P P series 00 Standard Type (Square Type) K K series !0Packaging Code Packaging T Tray 5 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonator (RESOMICSr) Features/Applications/Characteristics Reduces the size of microwave devices. Low loss and high dielectric constant. Features 1. High-purity, high-density ceramics minimize loss. 2. High dielectric constant makes possible the miniaturization of microwave circuits. Temperature-compensated dielectric constant enables stable microwave oscillators. 3. The high purity and smooth surface of the ceramics make them ideal for MIC applications. 4. A variety of shapes are available for custom application requirements. Applications * Satellite antenna (BS/CS Converters) * Burglar alarms * Multi-channel microwave communications systems * Radar systems * Speed guns * Mobile phone systems * CATV converters * Measuring equipment Circuit Applications * Microwave oscillators (DRO) * MIC (Microwave Integrated Circuits) * Discriminators * Filters * Tank circuits Electrical and Physical Characteristics of Dielectric Resonators (TE Mode) Material Code U M V R B E F Z 36 to 40 37 to 40 33 to 36 29 to 31 27 to 29 24 to 25 23 to 24 6.40.6 f1=-4 to 10 f1=0 to 6 f1=0 to 8 f1=0 to 6 f1=0 to 6 f1=0 to 6 f1=0 to 4 2=10030 6000 min. (at 7GHz) 7000 min. (at 7GHz) 10000 min. (at 10GHz) 12000 min. (at 10GHz) 15000 min. (at 10GHz) 20000 min. (at 10GHz) 35000 min. (at 10GHz) 2000 min. (at 7GHz) 1 x 1013 min. 1 x 1013 min. 1 x 1013 min. 1 x 1013 min. 1 x 1013 min. 1 x 1014 min. 1 x 1013 min. 1 x 1013 min. 6 to 7 6 to 7 12 to 13 10.7 11.0 10.7 11.0 to 10 Thermal Conductivity (W/m*C) 1.93 1.93 2.81 2.14 2.56 3.23 4.20 1.76 Specific Heat (J/kg*C) 630 630 382 210 302 323 328 840 Dielectric Constant (r) Temp. Coefficient (ppm/C) Q (=1/tan) Ins. Resistance (*cm) Expansion Coefficient (ppm/C) 3 Density (g/cm ) 5.0 5.0 6.5 7.7 7.6 7.5 7.5 2.7 Water absorption (%) 0.01 max. 0.01 max. 0.01 max. 0.01 max. 0.01 max. 0.01 max. 0.01 max. 0.01 max. Vicker's Hardness Number 900 900 600 700 700 800 700 800 Bend Strength (MPa) 98 98 98 88 108 118 108 147 1: f denotes temperature coefficient of resonant frequency. 2: denotes temperature coefficient of dielectric constant. 6 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonator (RESOMICSr) Features/Applications/Characteristics Electrical and Physical Characteristics of Dielectric Resonators (TEM Mode) Material Code K U P 921 f=32 381 f=32 21.40.2 f=42 1500 min. (at 3GHz) 8000 min. (at 3GHz) 9000 min. (at 3GHz) 1 x 1013 min. 1 x 1013 min. 1 x 1013 min. Expansion Coefficient (ppm/C) 8 to 9 6 to 7 8 to 9 Thermal Conductivity (W/m*C) 1.64 1.93 7.14 Specific Heat (J/kg*C) 546 630 840 Dielectric Constant (r) Temp. Coefficient (ppm/C) Q (=1/tan) Ins. Resistance (*cm) Density (g/cm3) 5.7 5.0 3.7 0.01 max. 0.01 max. 0.01 max. Vicker's Hardness Number 700 900 800 Bend Strength (MPa) 147 98 147 Water absorption (%) : f denotes temperature coefficient of resonant frequency. Electrical and Physical Characteristics of Dielectric Resonators (Microwave Dielectric Substrate) Material Code Dielectric Constant (r) Temp. Coefficient (ppm/C) Q (=1/tan) K U P 921 381 =-3030 =-3030 21.41 =-3030 1500 min. (at 3GHz) 8000 min. (at 3GHz) 9000 min. (at 3GHz) 1 x 10 min. 1 x 10 min. 1 x 1013 min. Expansion Coefficient (ppm/C) 8 to 9 6 to 7 8 to 9 Thermal Conductivity (W/m*C) 1.64 1.93 7.14 Specific Heat (J/kg*C) 546 630 840 Density (g/cm3) 5.7 5.0 3.7 Ins. Resistance (*cm) Water absorption (%) 13 13 0.01 max. 0.01 max. 0.01 max. Vicker's Hardness Number 700 900 800 Bend Strength (MPa) 147 98 147 : denotes temperature coefficient of dielectric constant. 7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please O95E9.pdf 03.7.7 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Element/Configuration Dielectric Element/Configuration Kind Types Configuration Features and Applications Disc TE mode resonator. Disc type with simple configuration. Used for stabilizing frequency in microwave oscillators. DRD Coaxial Cylinder TE mode resonator. The resonator with a hole improves spurious response without degrading Q. It can be mounted using a screw. DRT Dielectric Resonator Disc (Coaxial Cylinder) Type with support TE mode resonator. Disc type resonator with support. The resonator's Q is not influenced by metal case. DRB means Disc Type, and DRC means Coaxial Cylinder Type with support. Mono-Block Type TE mode resonator. Monoblock type of resonator and support. Lower cost than Disc type resonator with support, maintaining high performance. DRU means no hole type, and DRY means hole type. DRB DRC DRU DRY TEM mode Resonator of rod TEM mode resonator. High dielectric constant and high Q make possible the miniaturization of microwave circuits (ex. : VCO). DRR Coaxial Cylinder Support The support for TE mode resonator, which has a low dielectric constant and high Q, minimizes induced losses to the resonator. DRZ Substrate Dielectric Substrate DRP Please contact our sales representatives if you need TE mode resonator with support. 8 High dielectric constant and high Q reduce the size of MIC. Three grades of surface finish are available. O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Reference Data Reference Data * Dielectric Constant and Q of Frequency Characteristics * Resonant Frequency of Temperature Coefficient V Series K Series 100 B Series R Series E/F Series B Series R Series E/F Series -100 20 E/F Series P Series B Series P Series P Series 500,000 400,000 300,000 -200 F Series Q x f=350,000 f/fo (ppm) E Series Q x f=250,000 200,000 B Series Q x f=170,000 R Series Q x f=150,000 100,000 Q x f (GHz) U/M Series U/M Series V Series U/M Series V Series Q x f=120,000 -300 M Series Q x f=60,000 K Series K Series 50,000 40,000 30,000 -400 U Series Q x f=50,000 P Series Q x f=50,000 20,000 -500 10,000 K Series Q x f=5,000 5,000 4,000 -600 2 4 6 8 10 12 14 16 18 20 22 24 26 -60 -40 -20 0 Frequency (GHz) 20 40 60 80 100 Temperature (C) * Q of Temperature Characteristics 60000 50000 F Series (10GHz) 40000 Q r 70 50 40 30 V Series R Series 0 30000 E Series (10GHz) 20000 R Se B Serie ries (1 s (10G 0GH V Series (10GHz) Hz) z) 10000 M Series (10GHz) P Series (10GHz) U Series (10GHz) K Series (10GHz) 0 -60 -40 -20 0 20 40 60 80 100 Temperature (C) 9 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. 1 Dielectric Resonators (RESOMICSr) Dielectric Resonator U Series (DRD Type) Features Dr 1. High Q of 6,000 at 7GHz 2. High dielectric constant : Er=38 3. Resonant frequency temperature coefficient can be chosen from -4 to 10ppm/(degree C). Tolerance of the frequency temperature coefficient can be chosen from +-0.5, +-1, and +-2 ppm/(degree C). 4. Resonant frequency can be chosen from 1.5 to 12.5GHz. 5. Low price Lr Outer Dia. (mm) Thickness (mm) Frequency Range DRD0460206Uppp00T 4.65 0.05 mm 2.06 0.05 mm 11.46~12.45 GHz DRD0510224Uppp00T 5.06 0.05 mm 2.24 0.05 mm 10.54~11.46 GHz DRD0550244Uppp00T 5.50 0.05 mm 2.44 0.05 mm 9.69~10.54 GHz DRD0600265Uppp00T 5.98 0.05 mm 2.65 0.05 mm 8.91~9.69 GHz DRD0650288Uppp00T 6.50 0.05 mm 2.88 0.05 mm 8.20~8.91 GHz DRD0710314Uppp00T 7.07 0.05 mm 3.14 0.05 mm 7.54~8.20 GHz DRD0770341Uppp00T 7.69 0.05 mm 3.41 0.05 mm 6.93~7.54 GHz DRD0840371Uppp00T 8.36 0.05 mm 3.71 0.05 mm 6.38~6.93 GHz DRD0910403Uppp00T 9.09 0.05 mm 4.03 0.05 mm 5.87~6.38 GHz DRD0990438Uppp00T 9.88 0.05 mm 4.38 0.05 mm 5.40~5.87 GHz DRD1070477Uppp00T 10.75 0.05 mm 4.77 0.05 mm 4.96~5.40 GHz DRD1170518Uppp00T 11.68 0.05 mm 5.18 0.05 mm 4.56~4.96 GHz DRD1270563Uppp00T 12.70 0.05 mm 5.63 0.05 mm 4.20~4.56 GHz DRD1380613Uppp00T 13.81 0.05 mm 6.13 0.05 mm 3.86~4.20 GHz DRD1500666Uppp00T 15.02 0.05 mm 6.66 0.05 mm 3.55~3.86 GHz DRD1630724Uppp00T 16.33 0.05 mm 7.24 0.05 mm 3.27~3.55 GHz DRD1780788Uppp00T 17.76 0.05 mm 7.88 0.05 mm 3.00~3.27 GHz DRD1930856Uppp00T 19.31 0.05 mm 8.56 0.05 mm 2.76~3.00 GHz DRD2100931Uppp00T 21.00 0.05 mm 9.31 0.05 mm 2.54~2.76 GHz DRD2281013Uppp00T 22.83 0.05 mm 10.13 0.05 mm 2.34~2.54 GHz DRD2481101Uppp00T 24.82 0.05 mm 11.01 0.05 mm 2.15~2.34 GHz DRD2701197Uppp00T 26.99 0.05 mm 11.97 0.05 mm 1.98~2.15 GHz DRD2931302Uppp00T 29.35 0.05 mm 13.02 0.05 mm 1.82~1.98 GHz DRD3191415Uppp00T 31.91 0.05 mm 14.15 0.05 mm 1.67~1.82 GHz DRD3471539Uppp00T 34.70 0.05 mm 15.39 0.05 mm 1.54~1.67 GHz Part Number Codes for temperature coefficient of resonant frequency and the tolerance should be put into the three blank boxes of the above Part Numbers. Please see "Part Numbering" (ex.) 2.01.0ppm/C : 20A. 10 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please O95E9.pdf 03.7.7 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Freq. Temp. Coefficient, Dielectric Constant and Q 1 * U series Characteristic Frequency Temperature Coefficient Code (f) (ppm/C) Dielectric Constant (r) E0 -4 36.60.5 C0 -2 37.00.5 00 0 37.40.5 20 2 37.70.5 40 4 38.00.5 60 6 38.30.5 80 8 38.60.5 P0 10 38.90.5 Q (at 7GHz) 6,000 min. 11 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) 2 Dielectric Resonator U Series (DRT Type) Features Dr 1. High Q of 6,000 at 7GHz 2. High dielectric constant : Er=38 3. Resonant frequency temperature coefficient can be chosen from -4 to 10ppm/(degree C). Tolerance of the frequency temperature coefficient can be chosen from +-0.5, +-1, and +-2 ppm/(degree C). 4. Resonant frequency can be chosen from 2.7 to 11.5GHz. 5. Low price dr Lr Outer Dia. (mm) Inner Dia. (mm) Thickness (mm) Frequency Range DRT0510224Uppp00T 5.06 0.05 mm 2.0 0.1 mm 2.24 0.05 mm 10.54~11.45 GHz DRT0550244Uppp00T 5.50 0.05 mm 2.0 0.1 mm 2.44 0.05 mm 9.69~10.54 GHz DRT0600265Uppp00T 5.98 0.05 mm 2.0 0.1 mm 2.65 0.05 mm 8.91~9.69 GHz DRT0650288Uppp00T 6.50 0.05 mm 2.0 0.1 mm 2.88 0.05 mm 8.20~8.91 GHz DRT0710314Uppp00T 7.07 0.05 mm 2.0 0.1 mm 3.14 0.05 mm 7.54~8.20 GHz DRT0770341Uppp00T 7.69 0.05 mm 2.0 0.1 mm 3.41 0.05 mm 6.93~7.54 GHz DRT0840371Uppp00T 8.36 0.05 mm 3.0 0.1 mm 3.71 0.05 mm 6.38~6.93 GHz DRT0910403Uppp00T 9.09 0.05 mm 3.0 0.1 mm 4.03 0.05 mm 5.87~6.38 GHz DRT0990438Uppp00T 9.88 0.05 mm 3.0 0.1 mm 4.38 0.05 mm 5.40~5.87 GHz DRT1050460Uppp00T 10.50 0.05 mm 3.0 0.1 mm 4.60 0.05 mm 5.08~5.40 GHz DRT1070477Uppp00T 10.75 0.05 mm 4.0 0.1 mm 4.77 0.05 mm 4.96~5.08 GHz DRT1170518Uppp00T 11.68 0.05 mm 4.0 0.1 mm 5.18 0.05 mm 4.56~4.96 GHz DRT1270563Uppp00T 12.70 0.05 mm 4.0 0.1 mm 5.63 0.05 mm 4.20~4.56 GHz DRT1380613Uppp00T 13.81 0.05 mm 4.0 0.1 mm 6.13 0.05 mm 3.86~4.20 GHz DRT1500666Uppp00T 15.02 0.05 mm 4.0 0.1 mm 6.66 0.05 mm 3.55~3.86 GHz DRT1630724Uppp00T 16.33 0.05 mm 4.0 0.1 mm 7.24 0.05 mm 3.27~3.55 GHz DRT1780788Uppp00T 17.76 0.05 mm 4.0 0.1 mm 7.88 0.05 mm 3.00~3.27 GHz DRT1930856Uppp00T 19.31 0.05 mm 4.0 0.1 mm 8.56 0.05 mm 2.76~3.00 GHz DRT2000863Uppp00T 20.00 0.05 mm 4.0 0.1 mm 8.63 0.05 mm 2.67~2.89 GHz DRT2000863Uppp01T 20.00 0.05 mm 6.0 0.1 mm 8.63 0.05 mm 2.66~2.88 GHz Part Number Codes for temperature coefficient of resonant frequency and the tolerance should be put into the three blank boxes of the above Part Numbers. Please see "Part Numbering" (ex.) 2.01.0ppm/C : 20A. Freq. Temp. Coefficient, Dielectric Constant and Q * U series Characteristic Frequency Temperature Coefficient Code (f) (ppm/C) 12 Dielectric Constant (r) E0 -4 36.60.5 C0 -2 37.00.5 00 0 37.40.5 20 2 37.70.5 40 4 38.00.5 60 6 38.30.5 80 8 38.60.5 P0 10 38.90.5 Q (at 7GHz) 6,000 min. O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator M Series (DRD Type) 3 Features Dr 1. High Q of 7,000 at 7GHz 2. High dielectric constant : Er=38 3. Resonant frequency temperature coefficient can be chosen from 0 to 6ppm/(degree C). Tolerance of frequency temperature coefficient can be chosen from +-0.5, +-1 and +-2ppm/(degree C). 4. Resonant frequency can be chosen from 1.5 to 12.5GHz. Lr Outer Dia. (mm) Thickness (mm) Frequency Range DRD0460206Mppp00T 4.65 0.05 mm 2.06 0.05 mm 11.46~12.45 GHz DRD0510224Mppp00T 5.06 0.05 mm 2.24 0.05 mm 10.54~11.46 GHz DRD0550244Mppp00T 5.50 0.05 mm 2.44 0.05 mm 9.69~10.54 GHz DRD0600265Mppp00T 5.98 0.05 mm 2.65 0.05 mm 8.91~9.69 GHz DRD0650288Mppp00T 6.50 0.05 mm 2.88 0.05 mm 8.20~8.91 GHz DRD0710314Mppp00T 7.07 0.05 mm 3.14 0.05 mm 7.54~8.20 GHz DRD0770341Mppp00T 7.69 0.05 mm 3.41 0.05 mm 6.93~7.54 GHz DRD0840371Mppp00T 8.36 0.05 mm 3.71 0.05 mm 6.38~6.93 GHz DRD0910403Mppp00T 9.09 0.05 mm 4.03 0.05 mm 5.87~6.38 GHz DRD0990438Mppp00T 9.88 0.05 mm 4.38 0.05 mm 5.40~5.87 GHz DRD1070477Mppp00T 10.75 0.05 mm 4.77 0.05 mm 4.96~5.40 GHz DRD1170518Mppp00T 11.68 0.05 mm 5.18 0.05 mm 4.56~4.96 GHz DRD1270563Mppp00T 12.70 0.05 mm 5.63 0.05 mm 4.20~4.56 GHz DRD1380613Mppp00T 13.81 0.05 mm 6.13 0.05 mm 3.86~4.20 GHz DRD1500666Mppp00T 15.02 0.05 mm 6.66 0.05 mm 3.55~3.86 GHz DRD1630724Mppp00T 16.33 0.05 mm 7.24 0.05 mm 3.27~3.55 GHz DRD1780788Mppp00T 17.76 0.05 mm 7.88 0.05 mm 3.00~3.27 GHz DRD1930856Mppp00T 19.31 0.05 mm 8.56 0.05 mm 2.76~3.00 GHz DRD2100931Mppp00T 21.00 0.05 mm 9.31 0.05 mm 2.54~2.76 GHz DRD2281013Mppp00T 22.83 0.05 mm 10.13 0.05 mm 2.34~2.54 GHz DRD2481101Mppp00T 24.82 0.05 mm 11.01 0.05 mm 2.15~2.34 GHz DRD2701197Mppp00T 26.99 0.05 mm 11.97 0.05 mm 1.98~2.15 GHz DRD2931302Mppp00T 29.35 0.05 mm 13.02 0.05 mm 1.82~1.98 GHz DRD3191415Mppp00T 31.91 0.05 mm 14.15 0.05 mm 1.67~1.82 GHz DRD3471539Mppp00T 34.70 0.05 mm 15.39 0.05 mm 1.54~1.67 GHz Part Number Codes for temperature coefficient of resonant frequency and the tolerance should be put into the three blank boxes of the above Part Numbers. Please see "Part Numbering" (ex.) 2.01.0ppm/C : 20A. 13 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please O95E9.pdf 03.7.7 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Freq. Temp. Coefficient, Dielectric Constant and Q * M series Frequency Characteristic Temperature Coefficient Code (f) (ppm/C) 3 q w Q (at 7GHz) 00 0 38.51.0 37.71.0 7,400 min. 20 2 38.71.0 37.91.0 7,200 min. 40 4 38.91.0 38.21.0 7,100 min. 60 6 39.21.0 38.41.0 7,000 min. q : DRD046-DRD107 Type w : DRD117-DRD347 Type 14 Dielectric Constant (r) O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator M Series (DRT Type) Features Dr 1. High Q of 7,000 at 7GHz 2. High dielectric constant : Er=38 3. Resonant frequency temperature coefficient can be chosen from 0 to 6ppm/(degree C). Tolerance of frequency temperature coefficient can be chosen from +-0.5, +-1 and +-2ppm/(degree C). 4. Resonant freguency can be chosen from 2.5 to 11.5GHz. 4 dr Lr Outer Dia. (mm) Inner Dia. (mm) Thickness (mm) Frequency Range DRT0510224Mppp00T 5.06 0.05 mm 2.0 0.1 mm 2.24 0.05 mm 10.45~11.45 GHz DRT0550244Mppp00T 5.50 0.05 mm 2.0 0.1 mm 2.44 0.05 mm 9.69~10.45 GHz DRT0600265Mppp00T 5.98 0.05 mm 2.0 0.1 mm 2.65 0.05 mm 8.91~9.69 GHz DRT0650288Mppp00T 6.50 0.05 mm 2.0 0.1 mm 2.88 0.05 mm 8.20~8.91 GHz DRT0710314Mppp00T 7.07 0.05 mm 2.0 0.1 mm 3.14 0.05 mm 7.54~8.20 GHz DRT0770341Mppp00T 7.69 0.05 mm 2.0 0.1 mm 3.41 0.05 mm 6.93~7.54 GHz DRT0840371Mppp00T 8.36 0.05 mm 3.0 0.1 mm 3.71 0.05 mm 6.38~6.93 GHz DRT0910403Mppp00T 9.09 0.05 mm 3.0 0.1 mm 4.03 0.05 mm 5.87~6.38 GHz DRT0990438Mppp00T 9.88 0.05 mm 3.0 0.1 mm 4.38 0.05 mm 5.40~5.87 GHz DRT1070477Mppp00T 10.75 0.05 mm 4.0 0.1 mm 4.77 0.05 mm 4.96~5.40 GHz DRT1170518Mppp00T 11.68 0.05 mm 4.0 0.1 mm 5.18 0.05 mm 4.56~4.96 GHz DRT1270563Mppp00T 12.70 0.05 mm 4.0 0.1 mm 5.63 0.05 mm 4.20~4.56 GHz DRT1380613Mppp00T 13.81 0.05 mm 4.0 0.1 mm 6.13 0.05 mm 3.86~4.20 GHz DRT1500666Mppp00T 15.02 0.05 mm 4.0 0.1 mm 6.66 0.05 mm 3.55~3.86 GHz DRT1630724Mppp00T 16.33 0.05 mm 4.0 0.1 mm 7.24 0.05 mm 3.27~3.55 GHz DRT1780788Mppp00T 17.76 0.05 mm 4.0 0.1 mm 7.88 0.05 mm 3.00~3.27 GHz DRT1930856Mppp00T 19.31 0.05 mm 4.0 0.1 mm 8.56 0.05 mm 2.76~3.00 GHz DRT2100931Mppp00T 21.00 0.05 mm 4.0 0.1 mm 9.31 0.05 mm 2.54~2.76 GHz Part Number Codes for temperature coefficient of resonant frequency and the tolerance should be put into the three blank boxes of the above Part Numbers. Please see "Part Numbering" (ex.) 2.01.0ppm/C : 20A. Freq. Temp. Coefficient, Dielectric Constant and Q * M series Frequency Characteristic Temperature Coefficient Code (f) (ppm/C) Dielectric Constant (r) Q (at 7GHz) q w 00 0 38.51.0 37.71.0 7,400 min. 20 2 38.71.0 37.91.0 7,200 min. 40 4 38.91.0 38.21.0 7,100 min. 60 6 39.21.0 38.41.0 7,000 min. q : DRT051-DRT099 Type w : DRT107-DRT210 Type 15 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator M Series (DRU Type) Features 5 1. Designed for local oscillators for BS/CS LNBs. 2. Lower price compared with support glued type. 3. A high unloaded Q resonator using M series (Er=38). 4. Available with an outer diameter from phi 4.8mm, phi 5.06mm and phi 5.6mm. 5. Available with a frequency temperature coefficient from 0 to 10ppm/(degree C) and its tolerance from +-0.5, +-1.0 and +-2.0ppm/(degree C). 6. Angle of support fixed at 30 degree and the height at 1.0mm. o Dr T 30 1.0 0.7 (in mm) Part Number Resonant Frequency (MHz) Outer Dia. (mm) Thickness (mm) DRU048pppppMppp00R 10570 to 11690 4.80 0.05 2.25 to 3.01 (Typical) DRU051pppppMppp00R 10060 to 10820 5.06 0.05 2.54 to 3.14 (Typical) DRU056pppppMppp00R 9280 to 9880 5.60 0.05 2.77 to 3.31 (Typical) Part Number: Five blank boxes are filled with resonant frequency codes. Three bland boxes are filled with temperature coefficient of resonant frequency. Please see Part Numbering for details. Standard tolerance of resonant frequency is 30MHz. Resonant Frequency: Please consult our sales representatives or engineers regarding products with other frequencies. Freq. Temp. Coefficient, Dielectric Constant and Q * M series Characteristic Code Resonant Frequency Temperature Coefficient (f) (ppm/C) Dielectric Constant (r) Q (at 7GHz) 00 0 38.51.0 7,400 min. 20 2 38.71.0 7,200 min. 40 4 38.91.0 7,100 min. 60 6 39.21.0 7,000 min. Q value at 7GHz is only for information. Actual assurance of Q is done by unloaded Q values in our standard test fixture. 16 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator M Series (DRY Type) Features 1. Designed for local oscillators for BS/CS LNBs. 2. Lower price compared with support glued type. 3. A high unloaded Q resonator using M series (Er=38). 4. Available with an outer diameter from phi 4.8mm, phi 5.06mm and phi 5.6mm. 5. Available with a frequency temperature coefficient from 0 to 10ppm/(degree C) and its tolerance from +-0.5, +-1.0 and +-2.0ppm/(degree C). 6. Angle of support fixed at 30 degree and the height at 1.0mm. 7. Excellent spurious characteristics with hole. o Dr o dr T 30 1.0 0.7 6 (in mm) Part Number Resonant Frequency (MHz) Outer Dia. (mm) Inner Dia. (mm) Thickness (mm) DRY048pppppMppp00R 10570 to 11690 4.80 0.05 2.00 0.1 2.40 to 3.33 (Typical) DRY051pppppMppp00R 10060 to 10820 5.06 0.05 2.00 0.1 2.70 to 3.41 (Typical) DRY056pppppMppp00R 9280 to 9880 5.60 0.05 2.00 0.1 2.90 to 3.51 (Typical) Part Number: Five blank boxes are filled with resonant frequency codes. Three blank boxes are filled with temperature coefficient of resonant frequency. Please see Part Numbering for details. Standard tolerance of resonant frequency is 30MHz. Resonant Frequency: Please consult our sales representatives or engineers regarding products with other frequencies. Freq. Temp. Coefficient, Dielectric Constant and Q * M series Characteristic Code Resonant Frequency Temperature Coefficient (f) (ppm/C) Dielectric Constant (r) Q (at 7GHz) 00 0 38.51.0 7,400 min. 20 2 38.71.0 7,200 min. 40 4 38.91.0 7,100 min. 60 6 39.21.0 7,000 min. Q value at 7GHz is only for information. Actual assurance of Q is done by unloaded Q values in our standard test fixture. 17 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator V Series (DRD Type) Features Dr 1. High Q of 12,000 at 10GHz 2. High dielectric constant : Er=34 3. Resonant frequency temperature coefficient can be chosen from 0 to 8ppm/(degree C). Tolerance of frequency temperature coefficient can be chosen from +-0.5, +-1 and +-2ppm/(degree C). 4. Resonant frequency can be chosen from 2.9 to 13.2GHz. Lr 7 Outer Dia. (mm) Thickness (mm) Frequency Range DRD0460206Vppp00T 4.65 0.05 mm 2.06 0.05 mm 12.07~13.24 GHz DRD0510224Vppp00T 5.06 0.05 mm 2.24 0.05 mm 11.10~12.07 GHz DRD0550244Vppp00T 5.50 0.05 mm 2.44 0.05 mm 10.20~11.10 GHz DRD0600265Vppp00T 5.98 0.05 mm 2.65 0.05 mm 9.39~10.20 GHz DRD0650288Vppp00T 6.50 0.05 mm 2.88 0.05 mm 8.64~9.39 GHz DRD0710314Vppp00T 7.07 0.05 mm 3.14 0.05 mm 7.93~8.64 GHz DRD0770341Vppp00T 7.69 0.05 mm 3.41 0.05 mm 7.30~7.93 GHz DRD0840371Vppp00T 8.36 0.05 mm 3.71 0.05 mm 6.71~7.30 GHz DRD0910403Vppp00T 9.09 0.05 mm 4.03 0.05 mm 6.17~6.71 GHz DRD0990438Vppp00T 9.88 0.05 mm 4.38 0.05 mm 5.68~6.17 GHz DRD1070477Vppp00T 10.75 0.05 mm 4.77 0.05 mm 5.22~5.68 GHz DRD1170518Vppp00T 11.68 0.05 mm 5.18 0.05 mm 4.80~5.22 GHz DRD1270563Vppp00T 12.70 0.05 mm 5.63 0.05 mm 4.42~4.80 GHz DRD1380613Vppp00T 13.81 0.05 mm 6.13 0.05 mm 4.06~4.42 GHz DRD1500666Vppp00T 15.02 0.05 mm 6.66 0.05 mm 3.74~4.06 GHz DRD1630724Vppp00T 16.33 0.05 mm 7.24 0.05 mm 3.44~3.74 GHz DRD1780788Vppp00T 17.76 0.05 mm 7.88 0.05 mm 3.16~3.44 GHz DRD1930856Vppp00T 19.31 0.05 mm 8.56 0.05 mm 2.91~3.16 GHz Part Number Codes for temperature coefficient of resonant frequency and the tolerance should be put into the three blank boxes of the above Part Numbers. Please see "Part Numbering" (ex.) 2.01.0ppm/C : 20A. Freq. Temp. Coefficient, Dielectric Constant and Q * V series Characteristic Frequency Temperature Coefficient Code (f) (ppm/C) 18 Dielectric Constant (r) 00 0 33.50.5 20 2 33.90.5 40 4 34.30.5 60 6 34.70.5 80 8 35.10.5 Q (at 10GHz) 10,000 min. O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator V Series (DRT Type) Features Dr 1. High Q of 12,000 at 10GHz 2. High dielectric constant : Er=34 3. Resonant frequency temperature coefficient can be chosen from 0 to 8ppm/(degree C). Tolerance of frequency temperature coefficient can be chosen from +-0.5, +-1 and +-2ppm/(degree C). 4. Resonant frequency can be chosen from 2.9 to 12.5GHz. dr Lr Outer Dia. (mm) Inner Dia. (mm) Thickness (mm) Frequency Range DRT0510224Vppp00T 5.06 0.05 mm 2.0 0.1 mm 2.24 0.05 mm 11.41~12.52 GHz DRT0550244Vppp00T 5.50 0.05 mm 2.0 0.1 mm 2.44 0.05 mm 10.42~11.42 GHz DRT0600265Vppp00T 5.98 0.05 mm 2.0 0.1 mm 2.65 0.05 mm 9.54~10.42 GHz DRT0650288Vppp00T 6.50 0.05 mm 2.0 0.1 mm 2.88 0.05 mm 8.74~9.54 GHz DRT0710314Vppp00T 7.07 0.05 mm 2.0 0.1 mm 3.14 0.05 mm 8.00~8.74 GHz DRT0770341Vppp00T 7.69 0.05 mm 2.0 0.1 mm 3.41 0.05 mm 7.34~8.00 GHz DRT0840371Vppp00T 8.36 0.05 mm 3.0 0.1 mm 3.71 0.05 mm 6.85~7.34 GHz DRT0910403Vppp00T 9.09 0.05 mm 3.0 0.1 mm 4.03 0.05 mm 6.27~6.85 GHz DRT0990438Vppp00T 9.88 0.05 mm 3.0 0.1 mm 4.38 0.05 mm 5.74~6.27 GHz DRT1070477Vppp00T 10.75 0.05 mm 4.0 0.1 mm 4.77 0.05 mm 5.34~5.74 GHz DRT1170518Vppp00T 11.68 0.05 mm 4.0 0.1 mm 5.18 0.05 mm 4.89~5.34 GHz DRT1270563Vppp00T 12.70 0.05 mm 4.0 0.1 mm 5.63 0.05 mm 4.48~4.89 GHz DRT1380613Vppp00T 13.81 0.05 mm 4.0 0.1 mm 6.13 0.05 mm 4.10~4.48 GHz DRT1500666Vppp00T 15.02 0.05 mm 4.0 0.1 mm 6.66 0.05 mm 3.76~4.10 GHz DRT1630724Vppp00T 16.33 0.05 mm 4.0 0.1 mm 7.24 0.05 mm 3.45~3.76 GHz DRT1780788Vppp00T 17.76 0.05 mm 4.0 0.1 mm 7.88 0.05 mm 3.17~3.45 GHz DRT1930856Vppp00T 19.31 0.05 mm 4.0 0.1 mm 8.56 0.05 mm 2.91~3.17 GHz Part Number 8 Codes for temperature coefficient of resonant frequency and the tolerance should be put into the three blank boxes of the above Part Numbers. Please see "Part Numbering" (ex.) 2.01.0ppm/C : 20A. Freq. Temp. Coefficient, Dielectric Constant and Q * V series Characteristic Frequency Temperature Coefficient Code (f) (ppm/C) Dielectric Constant (r) 00 0 33.50.5 20 2 33.90.5 40 4 34.30.5 60 6 34.70.5 80 8 35.10.5 Q (at 10GHz) 10,000 min. 19 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator R Series (DRD Type) Features Dr 1. High Q of 15,000 at 10GHz 2. High dielectric constant : Er=30 3. Resonant frequency temperature coefficient can be chosen from 0 to 6ppm/(degree C). Tolerance of the frequency temperature coefficient can be chosen from +-0.5, +-1 and +-2ppm/(degree C). 4. Resonant frequency can be chosen from 4.6 to 24.2GHz. Outer Dia. (mm) Thickness (mm) Frequency Range DRD0260115Rppp00T 2.59 0.05 mm 1.15 0.05 mm 22.1~24.2 GHz DRD0280125Rppp00T 2.82 0.05 mm 1.25 0.05 mm 20.4~22.1 GHz DRD0310136Rppp00T 3.06 0.05 mm 1.36 0.05 mm 18.9~20.4 GHz DRD0330148Rppp00T 3.33 0.05 mm 1.48 0.05 mm 17.5~18.9 GHz DRD0360161Rppp00T 3.62 0.05 mm 1.61 0.05 mm 16.2~17.5 GHz DRD0390176Rppp00T 3.94 0.05 mm 1.76 0.05 mm 15.0~16.2 GHz DRD0430191Rppp00T 4.28 0.05 mm 1.91 0.05 mm 13.5~15.0 GHz DRD0460206Rppp00T 4.65 0.05 mm 2.06 0.05 mm 12.6~13.5 GHz DRD0510224Rppp00T 5.06 0.05 mm 2.24 0.05 mm 11.6~12.6 GHz DRD0550244Rppp00T 5.50 0.05 mm 2.44 0.05 mm 10.8~11.6 GHz DRD0600265Rppp00T 5.98 0.05 mm 2.65 0.05 mm 9.7~10.8 GHz DRD0650288Rppp00T 6.50 0.05 mm 2.88 0.05 mm 9.0~9.7 GHz DRD0710314Rppp00T 7.07 0.05 mm 3.14 0.05 mm 8.3~9.0 GHz DRD0770341Rppp00T 7.69 0.05 mm 3.41 0.05 mm 7.7~8.3 GHz DRD0840371Rppp00T 8.36 0.05 mm 3.71 0.05 mm 6.9~7.7 GHz DRD0910403Rppp00T 9.09 0.05 mm 4.03 0.05 mm 6.4~6.9 GHz DRD0990438Rppp00T 9.88 0.05 mm 4.38 0.05 mm 5.9~6.4 GHz DRD1070477Rppp00T 10.75 0.05 mm 4.77 0.05 mm 5.5~5.9 GHz DRD1170518Rppp00T 11.68 0.05 mm 5.18 0.05 mm 5.0~5.5 GHz DRD1270563Rppp00T 12.70 0.05 mm 5.63 0.05 mm 4.6~5.0 GHz Part Number 9 Lr Codes for temperature coefficient of resonant frequency and the tolerance should be put into the three blank boxes of the above Part Numbers. Please see "Part Numbering" (ex.) 2.01.0ppm/C : 20A. Freq. Temp. Coefficient, Dielectric Constant and Q * R series Characteristic Frequency Temperature Coefficient Code (f) (ppm/C) 20 Dielectric Constant (r) 00 0 29.70.8 20 2 30.30.8 40 4 30.90.8 60 6 31.50.8 Q (at 10GHz) 12,000 min. O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator R Series (DRT Type) Features Dr 1. High Q of 15,000 at 10GHz 2. High dielectric constant : Er=30 3. Resonant frequency temperature coefficient can be chosen from 0 to 6ppm/(degree C). Tolerance of the frequency temperature coefficient can be chosen from +-0.5, +-1 and +-2ppm/(degree C). 4. Resonant frequency can be chosen from 5.7 to 13.1GHz. dr Lr Outer Dia. (mm) Inner Dia. (mm) Thickness (mm) Frequency Range DRT0510224Rppp00T 5.06 0.05 mm 2.0 0.1 mm 2.24 0.05 mm 11.9~13.1 GHz DRT0550244Rppp00T 5.50 0.05 mm 2.0 0.1 mm 2.44 0.05 mm 11.0~11.9 GHz DRT0600265Rppp00T 5.98 0.05 mm 2.0 0.1 mm 2.65 0.05 mm 10.0~11.0 GHz DRT0650288Rppp00T 6.50 0.05 mm 2.0 0.1 mm 2.88 0.05 mm 9.1~10.0 GHz DRT0710314Rppp00T 7.07 0.05 mm 2.0 0.1 mm 3.14 0.05 mm 8.4~9.1 GHz DRT0770341Rppp00T 7.69 0.05 mm 2.0 0.1 mm 3.41 0.05 mm 7.7~8.4 GHz DRT0840371Rppp00T 8.36 0.05 mm 3.0 0.1 mm 3.71 0.05 mm 7.1~7.7 GHz DRT0910403Rppp00T 9.09 0.05 mm 3.0 0.1 mm 4.03 0.05 mm 6.5~7.1 GHz DRT0990438Rppp00T 9.88 0.05 mm 3.0 0.1 mm 4.38 0.05 mm 6.0~6.5 GHz DRT1050460Rppp00T 10.50 0.05 mm 3.0 0.1 mm 4.60 0.05 mm 5.7~6.0 GHz Part Number 10 Codes for temperature coefficient of resonant frequency and the tolerance should be put into the three blank boxes of the above Part Numbers. Please see "Part Numbering" (ex.) 2.01.0ppm/C : 20A. Freq. Temp. Coefficient, Dielectric Constant and Q * R series Characteristic Frequency Temperature Coefficient Code (f) (ppm/C) Dielectric Constant (r) 00 0 29.70.8 20 2 30.30.8 40 4 30.90.8 60 6 31.50.8 Q (at 10GHz) 12,000 min. 21 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator B Series (DRD Type) Features Dr 1. High Q of 18,000 at 10GHz 2. High dielectric constant : Er=27.9 3. Resonant frequency temperature coefficient can be chosen from 0 to 6ppm/(degree C). Tolerance of frequency temperature coefficient can be chosen from +-0.5, +-1 and +-2ppm/(degree C). 4. Resonant frequency can be chosen from 4.8 to 25.9GHz. Outer Dia. (mm) Thickness (mm) Frequency Range DRD0260115Bppp00T 2.59 0.05 mm 1.15 0.05 mm 23.67~25.94 GHz DRD0280125Bppp00T 2.82 0.05 mm 1.25 0.05 mm 21.75~23.67 GHz DRD0310136Bppp00T 3.06 0.05 mm 1.36 0.05 mm 20.03~21.75 GHz DRD0330148Bppp00T 3.33 0.05 mm 1.48 0.05 mm 18.40~20.03 GHz DRD0360161Bppp00T 3.62 0.05 mm 1.61 0.05 mm 16.92~18.40 GHz DRD0390176Bppp00T 3.94 0.05 mm 1.76 0.05 mm 15.53~16.92 GHz DRD0430191Bppp00T 4.28 0.05 mm 1.91 0.05 mm 14.30~15.53 GHz DRD0460206Bppp00T 4.65 0.05 mm 2.06 0.05 mm 13.19~14.30 GHz DRD0510224Bppp00T 5.06 0.05 mm 2.24 0.05 mm 12.13~13.19 GHz DRD0550244Bppp00T 5.50 0.05 mm 2.44 0.05 mm 11.15~12.13 GHz DRD0600265Bppp00T 5.98 0.05 mm 2.65 0.05 mm 10.26~11.15 GHz DRD0650288Bppp00T 6.50 0.05 mm 2.88 0.05 mm 9.44~10.26 GHz DRD0710314Bppp00T 7.07 0.05 mm 3.14 0.05 mm 8.67~9.44 GHz DRD0770341Bppp00T 7.69 0.05 mm 3.41 0.05 mm 7.97~8.67 GHz DRD0840371Bppp00T 8.36 0.05 mm 3.71 0.05 mm 7.33~7.97 GHz DRD0910403Bppp00T 9.09 0.05 mm 4.03 0.05 mm 6.75~7.33 GHz DRD0990438Bppp00T 9.88 0.05 mm 4.38 0.05 mm 6.21~6.75 GHz DRD1070477Bppp00T 10.75 0.05 mm 4.77 0.05 mm 5.70~6.21 GHz DRD1170518Bppp00T 11.68 0.05 mm 5.18 0.05 mm 5.25~5.70 GHz DRD1270563Bppp00T 12.70 0.05 mm 5.63 0.05 mm 4.83~5.25 GHz Part Number 11 Lr Codes for temperature coefficient of resonant frequency and the tolerance should be put into the three blank boxes of the above Part Numbers. Please see "Part Numbering" (ex.) 2.01.0ppm/C : 20A. Freq. Temp. Coefficient, Dielectric Constant and Q * B series Characteristic Frequency Temperature Coefficient Code (f) (ppm/C) 22 00 0 20 2 40 4 60 6 Dielectric Constant (r) Q (at 10GHz) 27.90.5 15,000 min. O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator B Series (DRT Type) Features Dr 1. High Q of 18,000 at 10GHz 2. High dielectric constant : Er=27.9 3. Resonant frequency temperature coefficient can be chosen from 0 to 6ppm/(degree C). Tolerance of frequency temperature coefficient can be chosen from +-0.5, +-1 and +-2ppm/(degree C). 4. Resonant frequency can be chosen from 5.9 to 13.7 GHz. dr Lr Outer Dia. (mm) Inner Dia. (mm) Thickness (mm) Frequency Range DRT0510224Bppp00T 5.06 0.05 mm 2.0 0.1 mm 2.24 0.05 mm 12.47~13.66 GHz DRT0550244Bppp00T 5.50 0.05 mm 2.0 0.1 mm 2.44 0.05 mm 11.39~12.47 GHz DRT0600265Bppp00T 5.98 0.05 mm 2.0 0.1 mm 2.65 0.05 mm 10.42~11.39 GHz DRT0650288Bppp00T 6.50 0.05 mm 2.0 0.1 mm 2.88 0.05 mm 9.55~10.42 GHz DRT0710314Bppp00T 7.07 0.05 mm 2.0 0.1 mm 3.14 0.05 mm 8.74~9.55 GHz DRT0770341Bppp00T 7.69 0.05 mm 2.0 0.1 mm 3.41 0.05 mm 8.02~8.74 GHz DRT0840371Bppp00T 8.36 0.05 mm 3.0 0.1 mm 3.71 0.05 mm 7.48~8.02 GHz DRT0910403Bppp00T 9.09 0.05 mm 3.0 0.1 mm 4.03 0.05 mm 6.85~7.48 GHz DRT0990438Bppp00T 9.88 0.05 mm 3.0 0.1 mm 4.38 0.05 mm 6.28~6.85 GHz DRT1050460Bppp00T 10.50 0.05 mm 3.0 0.1 mm 4.60 0.05 mm 5.92~6.28 GHz Part Number 12 Codes for temperature coefficient of resonant frequency and the tolerance should be put into the three blank boxes of the above Part Numbers. Please see "Part Numbering" (ex.) 2.01.0ppm/C : 20A. Freq. Temp. Coefficient, Dielectric Constant and Q * B series Characteristic Frequency Temperature Coefficient Code (f) (ppm/C) 00 0 20 2 40 4 60 6 Dielectric Constant (r) Q (at 10GHz) 27.90.5 15,000 min. 23 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator E Series (DRD Type) Features Dr 1. High Q of 24,000 at 10GHz 2. High dielectric constant : Er=24.5 3. Resonant frequency temperature coefficient can be chosen from 0 to 6ppm/(degree C). Tolerance of frequency temperature coefficient can be chosen from +-1, +-2ppm/(degree C). 4. Resonant frequency can be chosen from 8.4 to 25.2GHz. 5. E series is also fit for applications above 25GHz. Please consult us. Outer Dia. (mm) Thickness (mm) Frequency Range DRD0280125Eppp00T 2.82 0.05 mm 1.25 0.05 mm 23.17~25.15 GHz DRD0310136Eppp00T 3.06 0.05 mm 1.36 0.05 mm 21.27~23.17 GHz DRD0330148Eppp00T 3.33 0.05 mm 1.48 0.05 mm 19.48~21.27 GHz DRD0360161Eppp00T 3.62 0.05 mm 1.61 0.05 mm 17.93~19.48 GHz DRD0390176Eppp00T 3.94 0.05 mm 1.76 0.05 mm 16.47~17.93 GHz DRD0430191Eppp00T 4.28 0.05 mm 1.91 0.05 mm 15.16~16.47 GHz DRD0460206Eppp00T 4.65 0.05 mm 2.06 0.05 mm 13.95~15.16 GHz DRD0510224Eppp00T 5.06 0.05 mm 2.24 0.05 mm 12.82~13.95 GHz DRD0550244Eppp00T 5.50 0.05 mm 2.44 0.05 mm 11.80~12.82 GHz DRD0600265Eppp00T 5.98 0.05 mm 2.65 0.05 mm 10.85~11.80 GHz DRD0650288Eppp00T 6.50 0.05 mm 2.88 0.05 mm 9.98~10.85 GHz DRD0710314Eppp00T 7.07 0.05 mm 3.14 0.05 mm 9.18~9.98 GHz DRD0770341Eppp00T 7.69 0.05 mm 3.41 0.05 mm 8.44~9.18 GHz Part Number 13 Lr Codes for temperature coefficient of resonant frequency and the tolerance should be put into the three blank boxes of the above Part Numbers. Please see "Part Numbering" (ex.) 2.01.0ppm/C : 20A. Freq. Temp. Coefficient, Dielectric Constant and Q * E series Characteristic Frequency Temperature Coefficient Code (f) (ppm/C) 24 Dielectric Constant (r) 00 0 24.20.4 20 2 24.40.4 40 4 24.70.4 60 6 24.90.4 Q (at 10GHz) 20,000 min. O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator E Series (DRT Type) Features Dr 1. High Q of 24,000 at 10GHz 2. High dielectric constant : Er=24.5 3. Resonant frequency temperature coefficient can be chosen from 0 to 6ppm/(degree C). Tolerance of frequency temperature coefficient can be chosen from +-1, +-2ppm/(degree C). 4. Resonant frequency can be Chosenfrom 8.4 to 19.5GHz. 5. E series is also fit for applications above 25GHz. Please consult us. dr Lr Outer Dia. (mm) Inner Dia. (mm) Thickness (mm) Frequency Range DRT0360161Eppp00T 3.62 0.05 mm 1.3 0.1 mm 1.61 0.05 mm 17.93~19.48 GHz DRT0390176Eppp00T 3.94 0.05 mm 1.3 0.1 mm 1.76 0.05 mm 16.47~17.93 GHz DRT0430191Eppp00T 4.28 0.05 mm 1.3 0.1 mm 1.91 0.05 mm 15.16~16.47 GHz DRT0460206Eppp00T 4.65 0.05 mm 2.0 0.1 mm 2.06 0.05 mm 13.95~15.16 GHz DRT0510224Eppp00T 5.06 0.05 mm 2.0 0.1 mm 2.24 0.05 mm 12.82~13.95 GHz DRT0550244Eppp00T 5.50 0.05 mm 2.0 0.1 mm 2.44 0.05 mm 11.80~12.82 GHz DRT0600265Eppp00T 5.98 0.05 mm 2.0 0.1 mm 2.65 0.05 mm 10.85~11.80 GHz DRT0650288Eppp00T 6.50 0.05 mm 2.0 0.1 mm 2.88 0.05 mm 9.98~10.85 GHz DRT0710314Eppp00T 7.07 0.05 mm 2.0 0.1 mm 3.14 0.05 mm 9.18~9.98 GHz DRT0770341Eppp00T 7.69 0.05 mm 2.0 0.1 mm 3.41 0.05 mm 8.44~9.18 GHz Part Number Codes for temperature coefficient of resonant frequency and the tolerance should be put into the three blank boxes of the above Part Numbers. Please see "Part Numbering" (ex.) 2.01.0ppm/C : 20A. Freq. Temp. Coefficient, Dielectric Constant and Q 14 * E series Characteristic Frequency Temperature Coefficient Code (f) (ppm/C) Dielectric Constant (r) 00 0 24.20.4 20 2 24.40.4 40 4 24.70.4 60 6 24.90.4 Q (at 10GHz) 20,000 min. 25 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator F Series (DRD Type) Features Dr 1. High Q of 35,000 at 10GHz 2. High dielectric constant : Er=24 3. Resonant frequency temperature coefficient can be chosen from 0 to 4ppm/(degree C). Tolerance of frequency temperature coefficient can be chosen from +-1, +-2ppm/(degree C). 4. Resonant frequency can be chosen from 10.0 to 25.2GHz. 5. F series is also fit for applications above 25GHz. Please consult us. Lr Outer Dia. (mm) Thickness (mm) Frequency Range DRD0280125Fppp00T 2.82 0.05 mm 1.25 0.05 mm 23.17~25.15 GHz DRD0310136Fppp00T 3.06 0.05 mm 1.36 0.05 mm 21.27~23.17 GHz DRD0330148Fppp00T 3.33 0.05 mm 1.48 0.05 mm 19.48~21.27 GHz DRD0360161Fppp00T 3.62 0.05 mm 1.61 0.05 mm 17.93~19.48 GHz DRD0390176Fppp00T 3.94 0.05 mm 1.76 0.05 mm 16.47~17.93 GHz DRD0430191Fppp00T 4.28 0.05 mm 1.91 0.05 mm 15.16~16.47 GHz DRD0460206Fppp00T 4.65 0.05 mm 2.06 0.05 mm 13.95~15.16 GHz DRD0510224Fppp00T 5.06 0.05 mm 2.24 0.05 mm 12.82~13.95 GHz DRD0550244Fppp00T 5.50 0.05 mm 2.44 0.05 mm 11.80~12.82 GHz DRD0600265Fppp00T 5.98 0.05 mm 2.65 0.05 mm 10.85~11.80 GHz DRD0650288Fppp00T 6.50 0.05 mm 2.88 0.05 mm 9.98~10.85 GHz Part Number Codes for temperature coefficient of resonant frequency and the tolerance should be put into the three blank boxes of the above Part Numbers. Please see "Part Numbering" (ex.) 2.01.0ppm/C : 20A. Freq. Temp. Coefficient and Dielectric Constant 15 * F series Characteristic Frequency Temperature Coefficient Code (f) (ppm/C) 26 Unloaded Q Specifications (DRD Type) Part Number Unloaded Q (min.) f=0 f=1 f=2 f=3 f=4 Dielectric Constant (r) DRD0280125Fppp00T 11,000 11,200 11,500 11,700 12,000 00 0 23.80.5 DRD0310136Fppp00T 12,500 12,800 13,200 13,600 14,000 10 1 23.90.5 DRD0330148Fppp00T 14,000 14,200 14,500 14,700 15,000 20 2 24.00.5 DRD0360161Fppp00T 15,500 15,800 16,200 16,600 17,000 30 3 24.10.5 DRD0390176Fppp00T 17,000 17,200 17,500 17,700 18,000 40 4 24.20.5 DRD0430191Fppp00T 18,000 18,200 18,500 18,700 19,000 DRD0460206Fppp00T 19,000 19,300 19,700 20,100 20,500 DRD0510224Fppp00T 20,000 20,300 20,700 21,100 21,500 DRD0550244Fppp00T 22,000 22,600 23,200 13,800 24,500 DRD0600265Fppp00T 23,500 24,100 24,700 25,300 26,000 DRD0620288Fppp00T 25,000 25,200 25,500 25,700 26,000 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator F Series (DRT Type) Features Dr 1. High Q of 35,000 at 10GHz 2. High dielectric constant : Er=24 3. Resonant frequency temperature coefficient can be chosen from 0 to 4ppm/(degree C). Tolerance of frequency temperature coefficient can be chosen from +-1, +-2ppm/(degree C). 4. Resonant frequency can be chosen from 10.0 to 19.5GHz. 5. F-series is also fit for application above 25GHz. Please consult us. dr Lr Outer Dia. (mm) Inner Dia. (mm) Thickness (mm) Frequency Range DRT0360161Fppp00T 3.62 0.05 mm 1.3 0.1 mm 1.61 0.05 mm 17.93~19.48 GHz DRT0390176Fppp00T 3.94 0.05 mm 1.3 0.1 mm 1.76 0.05 mm 16.47~17.93 GHz DRT0430191Fppp00T 4.28 0.05 mm 1.3 0.1 mm 1.91 0.05 mm 15.16~16.47 GHz DRT0460206Fppp00T 4.65 0.05 mm 2.0 0.1 mm 2.06 0.05 mm 13.95~15.16 GHz DRT0510224Fppp00T 5.06 0.05 mm 2.0 0.1 mm 2.24 0.05 mm 12.82~13.95 GHz DRT0550244Fppp00T 5.50 0.05 mm 2.0 0.1 mm 2.44 0.05 mm 11.80~12.82 GHz DRT0600265Fppp00T 5.98 0.05 mm 2.0 0.1 mm 2.65 0.05 mm 10.85~11.80 GHz DRT0650288Fppp00T 6.50 0.05 mm 2.0 0.1 mm 2.88 0.05 mm 9.98~10.85 GHz Part Number Codes for temperature coefficient of resonant frequency and the tolerance should be put into the three blank boxes of the above Part Numbers. Please see "Part Numbering" (ex.) 2.01.0ppm/C : 20A. Freq. Temp. Coefficient and Dielectric Constant * F series Characteristic Frequency Temperature Coefficient Code (f) (ppm/C) Unloaded Q Specifications (DRT Type) Part Number Unloaded Q (min.) f=0 f=1 f=2 f=3 f=4 Dielectric Constant (r) DRT0360161Fppp00T 14,500 14,700 15,000 15,200 15,500 00 0 23.80.5 DRT0390176Fppp00T 17,000 17,100 17,200 17,300 17,500 10 1 23.90.5 DRT0430191Fppp00T 17,500 17,700 18,000 18,200 18,500 20 2 24.00.5 DRT0460206Fppp00T 18,000 18,200 18,500 18,700 19,000 30 3 24.10.5 DRT0510224Fppp00T 18,500 18,800 19,200 19,600 20,000 40 4 24.20.5 DRT0550244Fppp00T 20,500 21,200 22,000 22,700 23,500 DRT0600265Fppp00T 21,000 21,800 22,700 23,600 24,500 DRT0650288Fppp00T 22,000 22,800 23,700 24,600 25,500 27 16 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Support of Dielectric Resonator Z Series (DRZ Type) Features Ds Supports for "RESOMICS" DRD and DRT Type. ds Ls Outer Dia. (mm) Inner Dia. (mm) Thickness (mm) DRZ001ZT 3.50 0.05 mm 2.0 0.1 mm 0.60 0.05 mm DRZ002ZT 3.50 0.05 mm 2.0 0.1 mm 1.50 0.05 mm DRZ003ZT 6.00 0.05 mm 3.0 0.1 mm 1.20 0.05 mm DRZ004ZT 6.00 0.05 mm 3.0 0.1 mm 2.50 0.05 mm DRZ005ZT 8.00 0.05 mm 4.0 0.1 mm 2.00 0.05 mm DRZ006ZT 8.00 0.05 mm 4.0 0.1 mm 4.00 0.05 mm DRZ007ZT 10.00 0.05 mm 4.0 0.1 mm 3.50 0.05 mm DRZ008ZT 10.00 0.05 mm 4.0 0.1 mm 6.00 0.05 mm DRZ009ZT 12.00 0.05 mm 4.0 0.1 mm 4.00 0.05 mm DRZ010ZT 12.00 0.05 mm 4.0 0.1 mm 7.00 0.05 mm Part Number 17 28 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please O95E9.pdf 03.7.7 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. TE Mode Resonator/Support for Resonator Notice Notice (Storage and Operating Conditions) Do not store and use components under conditions with high humidity. Notice (Handling) 1. Do not apply excessive force and shock. 2. Do not touch components with bare hands or dirty gloves. Notice (Other) Please make sure that components operate correctly and satisfy your specifications when they are mounted in your actual products. 17 29 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator K Series (DRR Copper Plated Type) Features 6.0 1. High dielectric constant : Er=92 2. Lower price than silver plated type 3. Excellent solderability by copper electrode 4. These resonators cover wide range of resonant frequencies (by 10MHz step). 1.0 1.0 2.6 2.0 6.0 DRR060 Type L* * Dimension L can be calculated by the following, using dielectric constant and resonant frequency. . 3 x 1011/(nr * f0) (f0 : Hz) L= . / 4 TEM mode : n=4 / 2 TEM mode : n=2 4.0 (in mm) 0.7 0.6 2.0 4.0 DRR040 Type L* 0.5 * Dimension L can be calculated by the following, using dielectric constant and resonant frequency. . 3 x 1011 L= /(nr * f0) (f0 : Hz) . / 4 TEM mode : n=4 / 2 TEM mode : n=2 2.0 3.0 (in mm) 0.3 0.6 0.7 0.5 DRR020 Type 1.0 0.5 2.0 0.7 0.5 L* 3.0 L* * Dimension L can be calculated by the following, using dielectric constant and resonant frequency. . 3 x 1011/(nr * f0) (f0 : Hz) L= . / 4 TEM mode : n=4 / 2 TEM mode : n=2 DRR030 Type * Dimension L can be calculated by the following, using dielectric constant and resonant frequency. . 3 x 1011 L= /(nr * f0) (f0 : Hz) . / 4 TEM mode : n=4 / 2 TEM mode : n=2 (in mm) f0 (MHz) Unloaded Q (min) Wavelength Za (ohm) DRR060pppppKTC00T 440 to 490 330 Lambda/4 5.7 (Nominal Value) DRR060pppppKTC00T 500 to 790 350 Lambda/4 5.7 (Nominal Value) DRR060pppppKTC00T 800 to 1300 400 Lambda/4 5.7 (Nominal Value) DRR060pppppKPC00T 1000 to 1690 470 Lambda/2 5.7 (Nominal Value) DRR060pppppKPC00T 1700 to 2200 510 Lambda/2 5.7 (Nominal Value) DRR040pppppKTC00R 500 to 540 200 Lambda/4 4.8 (Nominal Value) DRR040pppppKTC00R 550 to 640 220 Lambda/4 4.8 (Nominal Value) DRR040pppppKTC00R 650 to 790 240 Lambda/4 4.8 (Nominal Value) DRR040pppppKTC00R 800 to 890 260 Lambda/4 4.8 (Nominal Value) DRR040pppppKTC00R 900 to 1490 270 Lambda/4 4.8 (Nominal Value) DRR040pppppKTC00R 1500 to 1800 290 Lambda/4 4.8 (Nominal Value) DRR040pppppKPC00R 1000 to 1390 300 Lambda/2 4.8 (Nominal Value) Part Number 18 (in mm) Continued on the following page. 30 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please O95E9.pdf 03.7.7 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. f0 (MHz) Unloaded Q (min) Wavelength Za (ohm) DRR040pppppKPC00R 1400 to 1890 340 Lambda/2 4.8 (Nominal Value) DRR040pppppKPC00R 1900 to 3000 370 Lambda/2 4.8 (Nominal Value) DRR030pppppKTC00R 900 to 1490 230 Lambda/4 7.4 (Nominal Value) DRR030pppppKTC00R 1500 to 1600 250 Lambda/4 7.4 (Nominal Value) DRR020pppppKTC00R 900 to 1590 150 Lambda/4 8.0 (Nominal Value) DRR020pppppKTC00R 1600 to 2600 190 Lambda/4 8.0 (Nominal Value) Part Number Dielectric Constant : 921 Temperature coefficient of resonant frequency : 32ppm/C Tolerance of resonant frequency : 0.7%max. (Please contact our sales representatives for details.) Unloaded Q is value at lower limit frequency range. Five blank boxes of the above Part Numbers are filled with Resonant Frequency codes. Please see Part Numbering for details. Minimum Quantity of Taping DRR020 type: 2500pcs./phi 330mm reel DRR030 type: 2000pcs./phi 330mm reel DRR040 type: 1500pcs./phi 330mm reel 18 31 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator P Series (DRR Copper Plated Type) Features 6.0 1. High dielectric constant : Er=21 2. Lower price than silver plated type 3. Excellent solderability by copper electrode 4. These resonators cover wide range of resonant frequencies (by 10MHz step). 1.0 1.0 2.6 2.0 6.0 DRR060 Type L* * Dimension L can be calculated by the following, using dielectric constant and resonant frequency. . 3 x 1011/(nr * f0) (f0 : Hz) L= . / 4 TEM mode : n=4 / 2 TEM mode : n=2 4.0 (in mm) 0.7 0.6 2.0 4.0 DRR040 Type L* 0.5 * Dimension L can be calculated by the following, using dielectric constant and resonant frequency. . 3 x 1011 L= /(nr * f0) (f0 : Hz) . / 4 TEM mode : n=4 / 2 TEM mode : n=2 2.0 3.0 (in mm) 0.3 0.6 0.7 0.5 DRR020 Type 1.0 0.5 2.0 0.7 0.5 L* 3.0 L* * Dimension L can be calculated by the following, using dielectric constant and resonant frequency. . 3 x 1011/(nr * f0) (f0 : Hz) L= . / 4 TEM mode : n=4 / 2 TEM mode : n=2 DRR030 Type * Dimension L can be calculated by the following, using dielectric constant and resonant frequency. . 3 x 1011 L= /(nr * f0) (f0 : Hz) . / 4 TEM mode : n=4 / 2 TEM mode : n=2 (in mm) f0 (MHz) Unloaded Q (min) Wavelength Za (ohm) DRR060pppppPTC00T 1000 to 1190 550 Lambda/4 11.9 (Nominal Value) DRR060pppppPTC00T 1200 to 1790 600 Lambda/4 11.9 (Nominal Value) DRR060pppppPTC00T 1800 to 2700 650 Lambda/4 11.9 (Nominal Value) DRR060pppppPPC00T 2000 to 2490 800 Lambda/2 11.9 (Nominal Value) DRR060pppppPPC00T 2500 to 3000 850 Lambda/2 11.9 (Nominal Value) DRR040pppppPTC00R 1300 to 1490 350 Lambda/4 10.0 (Nominal Value) DRR040pppppPTC00R 1500 to 1990 400 Lambda/4 10.0 (Nominal Value) DRR040pppppPTC00R 2000 to 3000 450 Lambda/4 10.0 (Nominal Value) DRR040pppppPPC00R 2500 to 3000 550 Lambda/2 10.0 (Nominal Value) DRR030pppppPTC00R 1900 to 2490 380 Lambda/4 15.4 (Nominal Value) DRR030pppppPTC00R 2500 to 3000 400 Lambda/4 15.4 (Nominal Value) DRR020pppppPTC00R 2800 to 3500 250 Lambda/4 16.7 (Nominal Value) Part Number 19 (in mm) Continued on the following page. 32 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please O95E9.pdf 03.7.7 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. f0 (MHz) Unloaded Q (min) Wavelength Za (ohm) 3510 to 5000 300 Lambda/4 16.7 (Nominal Value) Part Number DRR020pppppPTC00R Dielectric Constant : 21.40.2 Temperature coefficient of resonant frequency : 42ppm/C Tolerance of resonant frequency : 0.7%max. (Please contact our sales representatives for details.) Unloaded Q is value at lower limit of frequency range. Five blank boxes of the above Part Numbers are filled with Resonant Frequency codes. Please see Part Numbering for details. Minimum Quantity of Taping DRR020 type: 2500pcs./phi 330mm reel DRR030 type: 2000pcs./phi 330mm reel DRR040 type: 1500pcs./phi 330mm reel 19 33 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator K Series (DRR Silver Plated Type) Features 6.0 1. High dielectric constant : Er=92 2. These resonators cover wide range of resonant frequencies (by 10 MHz step). 1 0.5 2.6 3.0 6.0 L * Dimension L can be calculated by the following, using dielectric constant and resonant frequency. . 3 x 1011/(nr * f0) (f0 : Hz) L= . / 4 TEM mode : n=4 / 2 TEM mode : n=2 DRR060 Type 4.0 (in mm) 0.5 2.0 4.0 0.7 L 1.2 * Dimension L can be calculated by the following, using dielectric constant and resonant frequency. . 3 x 1011/(nr * f0) (f0 : Hz) L= . / 4 TEM mode : n=4 / 2 TEM mode : n=2 DRR040 Type (in mm) f0 (MHz) Unloaded Q (min) Wavelength Za (ohm) DRR060pppppKTS00T 440 to 790 350 Lambda/4 5.7 (Nominal Value) DRR060pppppKTS00T 800 to 1300 400 Lambda/4 5.7 (Nominal Value) DRR060pppppKPS00T 1000 to 1690 500 Lambda/2 5.7 (Nominal Value) DRR060pppppKPS00T 1700 to 2200 560 Lambda/2 5.7 (Nominal Value) DRR040pppppKTS00T 660 to 1190 250 Lambda/4 4.8 (Nominal Value) DRR040pppppKTS00T 1200 to 1650 280 Lambda/4 4.8 (Nominal Value) DRR040pppppKPS00T 1300 to 1990 320 Lambda/2 4.8 (Nominal Value) DRR040pppppKPS00T 2000 to 3000 350 Lambda/2 4.8 (Nominal Value) Part Number Dielectric Constant : 921 Temperature coefficient of resonant frequency : 32ppm/C Tolerance of resonant frequency : 0.7%max. (Please contact our sales representatives for details.) Unloaded Q is value at lower limit of frequency range. Five blank boxes of the above Part Numbers are filled with Resonant Frequency codes. Please see Part Numbering for details. 20 34 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator U Series (DRR Silver Plated Type) Features 6.0 1. High dielectric constant : Er=38 2. These resonators cover wide range of resonant frequencies (by 10 MHz step). 1 0.5 2.6 3.0 6.0 L * Dimension L can be calculated by the following, using dielectric constant and resonant frequency. . 3 x 1011/(nr * f0) (f0 : Hz) L= . / 4 TEM mode : n=4 / 2 TEM mode : n=2 DRR060 Type 4.0 (in mm) 0.5 2.0 4.0 0.7 L 1.2 * Dimension L can be calculated by the following, using dielectric constant and resonant frequency. . 3 x 1011/(nr * f0) (f0 : Hz) L= . / 4 TEM mode : n=4 / 2 TEM mode : n=2 DRR040 Type (in mm) f0 (MHz) Unloaded Q (min) Wavelength Za (ohm) DRR060pppppUTS00T 680 to 1540 450 Lambda/4 8.8 (Nominal Value) DRR060pppppUTS00T 1550 to 1800 550 Lambda/4 8.8 (Nominal Value) DRR060pppppUPS00T 1600 to 2390 700 Lambda/2 8.8 (Nominal Value) DRR060pppppUPS00T 2400 to 3500 800 Lambda/2 8.8 (Nominal Value) DRR040pppppUTS00T 1000 to 1990 360 Lambda/4 7.4 (Nominal Value) DRR040pppppUTS00T 2000 to 2700 400 Lambda/4 7.4 (Nominal Value) DRR040pppppUPS00T 2000 to 2990 480 Lambda/2 7.4 (Nominal Value) DRR040pppppUPS00T 3000 to 4800 520 Lambda/2 7.4 (Nominal Value) Part Number Dielectric Constant : 381 Temperature coefficient of resonant frequency : 32ppm/C Tolerance of resonant frequency : 0.5%max. (Please contact our sales representatives for details.) Unloaded Q is value at lower limit of frequency range. Five blank boxes of the above Part Numbers are filled with Resonant Frequency codes. Please see Part Numbering for details. 21 35 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. TEM Mode Resonator (DRR Copper Plated Type) Notice Notice (Soldering and Mounting) > Standard soldering conditions 1. Temperature Profile: (1) Pre-heating: Heat the resonator for about 120 sec. from room temperature to 150 (degree C). (2) Soldering: It is possible to solder at the peak for temperature range from 210 to 250 (degree C) 2mm square, 3mm square and 4mm square, from 210 to 230 (degree C) for 6mm square (standard temperature is 230 (degree C) for 2mm square, 3mm square and 4mm square, 220 (degree C) for 6mm square). But you have to keep the resonator at the temperature range which is higher than the peak temperature minus 30 (degree C) for about 30 sec. (For example, if the peak temperature is 230 (degree C), you have to keep the resonator at the temperature range higher than 200 (degree C) for about 30 sec.) (3) Cooling: Spontaneous cooling 2. Board land pattern (1) Pattern width is same as resonator width (T). (2) Pattern length is 3L/4 against resonator length (L). Recommended soldering position is 3/4 part on the middle of the resonator surface. 3. Solder Please use creamed type eutectic solder (flux-RMA type). (ex.: RMA390DH3 90-2C-90 made by Japan Alphametals) > Other If you are concerned that the products may be affected by corrosive gas or ionic material, you have to keep those products in the completely closed package or container. Notice (Soldering and Mounting) Recommended Land Pattern Dimensions Resonator Soldering part (Land pattern) 3L/4 Board L T Notice (Soldering and Mounting) Temp. Profile DRR060 Type Temp. Profile DRR040/030/020 Type 250 210 200 180 220 210 2 Temperature (C) Temperature (C) 230 150 1 3 Pre-heating 0 2 180 150 1 3 Pre-heating 0 Time (sec.) about 120 about 30 Time (sec.) about 120 about 30 Continued on the following page. 21 36 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. TEM Mode Resonator (DRR Copper Plated Type) Notice Continued from the preceding page. Notice (Soldering and Mounting) Soldering Condition DRR060 Type Soldering Condition DRR040/030/020 Type 260 260 240 Temperature (C) 240 Temperature (C) 220 200 220 200 Soldering condition (peak temperature and keeping time at peak temperature) should be included inside the shaded zone 180 Soldering condition (peak temperature and keeping time at peak temperature) should be included inside the shaded zone 180 0 0 10 20 30 40 50 60 70 Time (sec.) 10 20 30 40 50 60 70 80 90 Time (sec.) Notice (Storage and Operating Conditions) Please keep the following articles to preserve the solderability and the unloaded Q. > Storage condition 1. Store the products under the conditions of environmental temperature less than 50 (degree C) and relative humidity less than 80%RH. 2. Do not store the products in an environment of corrosive gas (hydrogen sulfide, NaCl etc.). Notice (Handling) 1. Do not apply excessive force onto terminals of the products. 2. The products are made of ceramics and copper electrodes. Rapid heating and cooling may damage the products during soldering. Please refer to our standard soldering conditions when you solder the products. 21 37 O95E9.pdf 03.7.7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Dielectric Resonators (RESOMICSr) Dielectric Resonator Substrates Features L 1. High dielectric constant miniaturizes MIC. 2. Provides very high Q-value throughout the microwave bands. 3. Extremely dense ceramic composition provides smooth surfaces. L Part Number*1 Dielectric Constant (er) Side Length (L)*2 (mm) Thickness (T) (mm) DRP508ppppKN0Gp00T 91.0 3 50.8 0.1 mm 0.20 to 3.00 DRP254ppppKN0Gp00T 91.0 3 25.4 0.1 mm 0.15 to 3.00 DRP508ppppUN0Gp00T 38.0 1 50.8 0.1 mm 0.20 to 3.00 DRP254ppppUN0Gp00T 38.0 1 25.4 0.1 mm 0.15 to 3.00 DRP508ppppPN0Gp00T 21.4 1 50.8 0.1 mm 0.20 to 3.00 DRP254ppppPN0Gp00T 21.4 1 25.4 0.1 mm 0.15 to 3.00 Part Number: Four blank boxes are filled with Thickness Codes. A blank box is filled with Average Surface Roughness Code. Please see table [Surface Finish] below. Side Length: Chamfers of c0.3-c0.8 (mm) are formed on four corners. Material Surface Finish Expansion Dielectric Constant Material Dielectric Q Constant Coefficient Temperature Coefficient Code (at 3GHz) (r) (ppm/C) () (ppm/C) K 0.1 to 0.8 1,500 min. 8 to 9 -3030 C U 381 8,000 min. 6 to 7 -3030 D 0.05 to 0.40 P 21.41 9,000 min. 8 to 9 -3030 F 0.004 to 0.040 Do not store and use components under conditions with high humidity. Notice (Handling) 1. Do not apply excessive force and shock. 2. Do not touch components with bare hands or dirty gloves. 38 Average Surface Roughness (Ra) (m) 921 Notice (Storage and Operating Conditions) 22 Surface Finish Code T catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please O95E9.pdf 03.7.7 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Notice (Other) Please make sure that components operate correctly and satisfy your specifications when they are mounted in your actual products. 22 39 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. O95E9.pdf 03.7.7 Note: 1. Export Control For customers outside Japan Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. For customers in Japan For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. < < > > 2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above 3. Product specifications in this catalog are as of January 2003. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. http://www.murata.com/ Head Office 2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp