SaRonix Crystal Clock Oscillator 5V, HCMOS Technical Data NTH / NCH Series ACTUAL SIZE Description A 5V crystal controlled, low current, low jitter and high frequency oscillator with precise rise and fall times demanded in networking applications, such as Gigabit Ethernet and Fibre Channel. The tri-state function on the NTH enables the output to go high impedance. Device is packaged in a 14 or an 8-pin DIP compatible resistance welded, all metal grounded case, to reduce EMI. Frequency Range: 500 kHz to 106.25 MHz Frequency Stability: *See Part Numbering Guide 20*, 25, 50 or 100 ppm over all conditions: calibration tolerance, operating temperature, input voltage change, load change, 30 day aging, shock and vibration. Temperature Range: Operating: Storage: 0 to +70C or -40 to +85C -55 to +125C Supply Voltage: Recommended Operating: +5VDC 10% Supply Current: 0.5 to 8 MHz: 8+ to 24 MHz: 24+ to 50 MHz: 50+ to 80 MHz 80+ to 106.25 MHz: 12mA 20mA 35mA 50mA 65mA Output Drive: Symmetry: HCMOS Rise and Fall Times: Logic 0: Logic 1: Load: RMS Period Jitter: TTL Symmetry: Rise and Fall Times: Applications & Features * * * * * * * Logic 0: Logic 1: Load: RMS Period Jitter: Fibre Channel Gigabit Ethernet 32 Bit Microprocessors Tri-State output on NTH HCMOS/TTL compatible SMD plastic available 3.3V version available CMOS Shock: Solderability: Terminal Strength: Vibration: Solvent Resistance: Resistance to Soldering Heat: TTL Tf Tr Tf V DD 1 Level 80% VDD 50% V DD 2.5 VDC 1.5 VDC 0.5 VDC 20% V DD 0 Level GND SYMMETRY measured @1.5V level, See Part Numbering Guide 6ns max to 24 MHz @ 0.5 to 2.5V 3ns max 24+ to 80 MHz 1.5ns max 80+ to 106.25 MHz 0.5 V max VCC -0.6V min 10TTL to 50MHz, 5TTL 50+ to 106.25 MHz 8ps max Mechanical: Output Waveform Tr measured @50%VDD, See Part Numbering Guide 8ns max to 24 MHz @20% to 80% VDD 5ns max 24+ to 80 MHz 2ns max 80+ to 106.25 MHz 10% VDD max 90% VDD min 50pF to 50MHz, 30pF 50+ to 70 MHz, 15pF 70+ to 106.25 MHz 8ps max Environmental: Gross Leak Test: Fine Leak Test: Thermal Shock: Moisture Resistance: MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2004, Conditions B2 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition A, B or C ( I or J for Gull Wing) MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-883, Method Method Method Method 1014, Condition C 1014, Condition A2 1011, Condition A 1004 Tri-State Logic Table (NTH only) SYMMETRY Pin 1 Input Pin 8 (5) Output Logic 1 or NC Oscillation Logic 0 or GND High Impedance Required Input Levels on Pin 1: Logic 1 = 3.0 V min Logic 0 = 0.5V max DS-104 SaRonix REV E01 141 Jefferson Drive * Menlo Park, CA 94303 * USA * 650-470-7700 * 800-227-8974 * Fax 650-462-9894 SaRonix Crystal Clock Oscillator 5V, HCMOS Technical Data NTH / NCH Series Package Details Part Numbering Guide FULL SIZE PACKAGE 0.91 .036 max 5.08 max .200 .46.08 .018.003 Pin 7 GND 12.19.13 .480.005 4.57.13 .180.005 13.0 max .510 (4) Glass Insulators Pin 14 +5VDC Frequency (MHz) Series NTH = Tri-State, HCMOS compat. NCH = Pin1 N/C, HCMOS compat. Stability Tolerance C = 100ppm B = 50ppm A = 25ppm, 0 to +70C only AA = 20ppm, 0 to +70C only, 80MHz max 6.35.51 .250.020 15.24.13 .600.005 Pin 1 Tri-State - NTH N/C - NCH - 24.0000 NTH 0 6 0 B 21.0 max .825 7.75 max .305 Pin 8 Output Symmetry / Temperature Range 0 = 40/60%, 0 to +70C 2 = 40/60%, -40 to +85C 4 = 45/55%, -40 to +85C, 0.5 to 40 MHz only (TTL) 6 = 45/55%, 0 to +70C, 0.5 to 50 MHz only (TTL) A = 45/55%, 0 to +70C, 0.5 to 70 MHz only (CMOS) C = 45/55%, -40 to +85C, 0.5 to 50 MHz only (CMOS) Package 0 = Full Size, Thru Hole 9 = Half Size, Thru Hole K = Full Size, Gull Wing J = Half Size, Gull Wing N = Half Size, Gull Wing, Spanked Leads Frequency Range 3 = 0.5 to 6 MHz 6 = 6+ to 24 MHz 8 = 24+ to 106.25 MHz Marking Format ** Includes Date Code, Frequency & Model Example PN: SARONIX NTH030C-6.0000 Test Circuits TEST POINT mA M Denotes Pin 1 Pin 14 (8) 13.0 max .510 GND 5.08 max .200 TRI-STATE INPUT (NTH only) HCMOS (Used at SaRonix) 7.62.20 .300.008 120 Pin 4 GND 7.62.20 .300.008 120 TEST POINT mA M Pin 14 (8) 1.7 .067 6.0 .236 Marking Format ** Pin 5 Output POWER SUPPLY RL = 390 Pin 8 (5) VCC Pin 8 +5VDC Pin 7 (4) NOTE A: CL includes probe and fixture capacitance *( ) Indicates pin numbers for half-size package 6.35.051 0.250.02 120 13.0 .510 max CL = see specs on previous pg (Note A) Pin 1 (1) * 0.91 max .036 1.5 .059 OUT OSCILLATOR VM POWER SUPPLY 10.87 max .428 .46.08 .018.003 Pin 1 Tri-State - NTH N/C - NCH Pin 8 (5) VCC HALF SIZE PACKAGE OUT CL = 15 pF (Note A) OSCILLATOR VM GND Pin 1 (1) * MMBD7000 or Equiv Pin 7 (4) Includes Date Code, Frequency & Model TRI-STATE INPUT (NTH only) SARONIX NOTE A: C L includes probe and fixture capacitance *( ) Indicates pin numbers for half-size package TTL (Optional load) Denotes Pin 1 ** Exact location of items may vary mm Scale: None (Dimensions in ) inches SaRonix All specifications are subject to change without notice. DS-104 REV E01 141 Jefferson Drive * Menlo Park, CA 94025 * USA * 650-470-7700 * 800-227-8974 * Fax 650-462-9894