Adapters 310-034 O-Ring Sealed Shrink Boot Adapter Direct Coupling - Standard Profile CONNECTOR DESIGNATOR: MIL-DTL-5015, -26482, Series II and -83723 Series I and III MIL-DTL-5015 MIL-DTL-2292 Angle and Profile H = 45 J = 90 S = Straight Product Series MIL-DTL-26482 MIL-DTL-26500 310 MIL-DTL-38999 Series I, II D S 034 M 16 T MIL-DTL-28840 MIL-DTL-38999 Series III and IV Basic Part Number Connector Designator MIL-DTL-81511 Series I, II, III & IV Shell Size Shrink Boot See Table III (Omit for None) MIL-DTL-83723 Series II PATT 105, PATT 603, PATT 608 DIRECT COUPLING K (Table A Thread (Table I) *When using Designator B, refer to Pages H-4 and H-5 tandar ot d Bo Ki O-Ring s LN29729 T t A B* C D E F G H J K L S Finish B = Cadmium Plate, Olive Drab C = Anodize, Black G = Hard Coat, Anodic M = Electroless Nickel NF = Cadmium Plate, Olive Drab over Electroless Nickel (See Page H-3) Add "T" to Part Number for Standard Boot V) B (Table I) Cable Entry L (Table V) J (Table III) J E (Table III) (Table IV) G (Table IV) F (Table IV) B (Table I) B (Table I) H H (Table IV) APPLICATION NOTES 1. Cable Entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 2. See Backshell Interface Dimensions and Standards on Page H-4. 3. When using Connector Designator B refer to pages H-4 and H-5 for part number development. (c) 2011 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-8 E-Mail: sales@glenair.com Adapters 310-034 O-Ring Sealed Shrink Boot Adapter Direct Coupling - Standard Profile See Pages H-2 and H-3 for unabridged Tables I and II. TABLE III: Front Adapter Shell Size TABLE IV: Dimensions Shell Size J Max - Connector Designator C A-E-F-J-H-S D-B-G-K 08/09 1.180 (30.0) 1.250 (31.8) - 10/11 1.180 (30.0) 1.250 (31.8) - E Max F Max G Max 08/09 .639 (16.2) .810 (20.6) .750 (19.1) H Max .920 (23.4) 10/11 .664 (16.9) .840 (21.3) .810 (20.6) .980 (24.9) 12/13 .688 (17.5) .860 (21.8) .870 (22.1) 1.040 (26.4) .920 (23.4) 1.110 (28.2) 12/13 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 14/15 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 14/15 .705 (17.9) .890 (22.6) 16/17 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 16/17 .732 (18.6) .910 (23.1) .980 (24.9) 1.170 (29.7) .748 (19.0) .920 (23.4) 1.020 (25.9) 1.190 (30.2) 18/19 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 18/19 20/21 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 20/21 .773 (19.6) .940 (23.9) 1.080 (27.4) 1.250 (31.8) .800 (20.3) .980 (24.9) 1.140 (29.0) 1.330 (33.8) 22/23 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 22/23 24/25 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 24/25 .823 (20.9) 1.010 (25.7) 1.200 (30.5) 1.400 (35.6) 1.041 (26.4) 1.180 (30.0) 1.480 (37.6) 1.640 (41.7) 28/29 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 28 32/33 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 32 1.092 (27.7) 1.370 (34.8) 1.610 (40.9) 1.880 (47.8) 1.041 (26.4) 1.180 (30.0) 1.480 (37.6) 1.640 (41.7) 1.092 (27.7) 1.370 (34.8) 1.610 (40.9) 1.880 (47.8) 36 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 28 40 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) 32 TABLE V: Shell Size, Cable Entry, Dimensions and Shrink Boot Part Numbers (c) 2011 Glenair, Inc. Shell Size K Max L Max Cable Entry Minimum Shrink Boot Part Number 08 .500 (12.7) .688 (17.5) .250 (6.4) 770-001S103 10/11 .500 (12.7) .803 (20.4) .355 (9.0) 770-001S103 12/13 .500 (12.7) .938 (23.8) .491 (12.5) 770-001S104 14/15 .500 (12.7) 1.063 (27.0) .565 (14.4) 770-001S104 16/17 .500 (12.7) 1.238 (31.4) .690 (17.5) 770-001S106 18 .500 (12.7) 1.310 (33.3) .769 (19.5) 770-001S106 20 .500 (12.7) 1.436 (36.5) .844 (21.4) 770-001S107 22 .500 (12.7) 1.560 (39.6) 1.019 (25.9) 770-001S107 24 .500 (12.7) 1.686 (42.8) 1.134 (28.8) 770-001S108 28 .687 (17.4) 2.062 (52.4) 1.369 (34.8) 770-001S108 32 .687 (17.4) 2.312 (58.7) 1.615 (41.0) 770-001S109 36 .687 (17.4) 2.562 (65.1) 1.830 (46.5) Consult Factory 40 .687 (17.4) 2.812 (71.4) 2.045 (51.9) Consult Factory Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 H Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com H-9 E-Mail: sales@glenair.com