Adapters
H
Dimensions in inches (millimeters) and are subject to change without notice.
© 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com H-8 E-Mail: sales@glenair.com
APPLICATION NOTES
1. Cable Entry is dened as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria.
2. See Backshell Interface Dimensions and Standards on Page H-4.
3. When using Connector Designator B refer to pages H-4 and H-5 for part number development.
Product
Series
Shell
Size
Connector
Designator
Angle and Prole
H = 45°
J = 90°
S = Straight
Basic
Part Number
Shrink Boot
See Table III
(Omit for None)
310 D S 034 M 16 T
Finish
B = Cadmium Plate, Olive Drab
C = Anodize, Black
G = Hard Coat, Anodic
M = Electroless Nickel
NF = Cadmium Plate, Olive Drab
over Electroless Nickel
(See Page H-3)
310-034
O-Ring Sealed Shrink Boot Adapter
Direct Coupling - Standard Prole
G
(Table IV)
H
(Table IV)
B (Table I)
J
(Table III)
E
(Table IV)
F (Table IV)
B (Table I)
J
(Table III)
A Thread (Table I)
O-Ring
K
(Table
V)
L (Table V)
B
(Table I)
Cable
Entry
CONNECTOR DESIGNATOR:
AMIL-DTL-5015, -26482, Series II
and -83723 Series I and III
B* MIL-DTL-5015
CMIL-DTL-2292
DMIL-DTL-26482
EMIL-DTL-26500
FMIL-DTL-38999 Series I, II
GMIL-DTL-28840
HMIL-DTL-38999 Series III and IV
JMIL-DTL-81511 Series I, II, III & IV
KMIL-DTL-83723 Series II
LLN29729
SPATT 105, PATT 603, PATT 608
DIRECT COUPLING
*When using Designator B,
refer to Pages H-4 and H-5
Add "T" to Part Number
for Standard Boot
T
s
t
a
n
d
a
r
d
B
o
o
t
K
i
t
Adapters
H
Dimensions in inches (millimeters) and are subject to change without notice.
© 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com H-9 E-Mail: sales@glenair.com
TABLE V: Shell Size, Cable Entry, Dimensions
and Shrink Boot Part Numbers
Shell
Size K
Max L
Max Cable Entry
Minimum Shrink Boot
Part Number
08 .500 (12.7) .688 (17.5) .250 (6.4) 770-001S103
10/11 .500 (12.7) .803 (20.4) .355 (9.0) 770-001S103
12/13 .500 (12.7) .938 (23.8) .491 (12.5) 770-001S104
14/15 .500 (12.7) 1.063 (27.0) .565 (14.4) 770-001S104
16/17 .500 (12.7) 1.238 (31.4) .690 (17.5) 770-001S106
18 .500 (12.7) 1.310 (33.3) .769 (19.5) 770-001S106
20 .500 (12.7) 1.436 (36.5) .844 (21.4) 770-001S107
22 .500 (12.7) 1.560 (39.6) 1.019 (25.9) 770-001S107
24 .500 (12.7) 1.686 (42.8) 1.134 (28.8) 770-001S108
28 .687 (17.4) 2.062 (52.4) 1.369 (34.8) 770-001S108
32 .687 (17.4) 2.312 (58.7) 1.615 (41.0) 770-001S109
36 .687 (17.4) 2.562 (65.1) 1.830 (46.5) Consult Factory
40 .687 (17.4) 2.812 (71.4) 2.045 (51.9) Consult Factory
TABLE III: Front Adapter
Shell
Size J Max - Connector Designator C
A-E-F-J-H-S D-B-G-K
08/09 1.180 (30.0) 1.250 (31.8) –
10/11 1.180 (30.0) 1.250 (31.8) –
12/13 1.180 (30.0) 1.250 (31.8) 1.735 (44.1)
14/15 1.180 (30.0) 1.250 (31.8) 1.915 (48.6)
16/17 1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
18/19 1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
20/21 1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
22/23 1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
24/25 1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
28/29 1.610 (40.9) 1.560 (39.6) 1.915 (48.6)
32/33 1.610 (40.9) 1.750 (44.5) 1.915 (48.6)
36 1.610 (40.9) 1.750 (44.5) 1.915 (48.6)
40 1.610 (40.9) 2.190 (55.6) 1.915 (48.6)
TABLE IV: Dimensions
Shell
Size E
Max F
Max G
Max H
Max
08/09 .639 (16.2) .810 (20.6) .750 (19.1) .920 (23.4)
10/11 .664 (16.9) .840 (21.3) .810 (20.6) .980 (24.9)
12/13 .688 (17.5) .860 (21.8) .870 (22.1) 1.040 (26.4)
14/15 .705 (17.9) .890 (22.6) .920 (23.4) 1.110 (28.2)
16/17 .732 (18.6) .910 (23.1) .980 (24.9) 1.170 (29.7)
18/19 .748 (19.0) .920 (23.4) 1.020 (25.9) 1.190 (30.2)
20/21 .773 (19.6) .940 (23.9) 1.080 (27.4) 1.250 (31.8)
22/23 .800 (20.3) .980 (24.9) 1.140 (29.0) 1.330 (33.8)
24/25 .823 (20.9) 1.010 (25.7) 1.200 (30.5) 1.400 (35.6)
28 1.041 (26.4) 1.180 (30.0) 1.480 (37.6) 1.640 (41.7)
32 1.092 (27.7) 1.370 (34.8) 1.610 (40.9) 1.880 (47.8)
28 1.041 (26.4) 1.180 (30.0) 1.480 (37.6) 1.640 (41.7)
32 1.092 (27.7) 1.370 (34.8) 1.610 (40.9) 1.880 (47.8)
310-034
O-Ring Sealed Shrink Boot Adapter
Direct Coupling - Standard Profi le
See Pages H-2 and H-3 for unabridged Tables I and II.