09/2008
41
R60
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
Typical applications: blocking, coupling, decoupling,
by-passing, interference suppression in low voltage
applications (i.e.: AUTOMOTIVE).
PRODUCT CODE: R60
Note: Special version, in compliance with DIN 44122 is
available upon request.
Construction:
• STACKED technology for pitch 10mm
(Rated Voltage from 50 to 630Vdc)
• WOUND technology from pitch 10 to 27.5mm
(Rated Voltage from 63 to 1000Vdc)
PRODUCT CODE SYSTEM
The part number, comprising 14 digits, is formed as follows:
1 2 3 4 5 6 7 8 9 10 11 12 13 14
R 6 0 -
Digit 1 to 3 Series code.
Digit 4 d.c. rated voltage:
C = 50V D = 63V E = 100V G = 160V
I = 250V M = 400V P = 630V Q = 1000V
Digit 5 Pitch:
F=10mm; I=15mm; N=22.5mm; R=27.5mm;
W=37.5mm
Digit 6 to 9 Digits 7 - 8 - 9 indicate the rst three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical version and/or packaging (table1)
Digit 12 Identies the dimensions and electrical
characteristics.
Digit 13 Internal use
Digit 14 Capacitance tolerance:
J=5%; K=10%; M=20%.
Table 1 (for more detailed information, please refer to page 14)
Standard
packaging style
Lead
length
Taping style Ordering code
(mm)
P2
(mm)
Fig.
(No.)
Pitch
(mm) (Digit 10 to 11)
AMMO-PACK 12.70 1 10.0/15.0 DQ
AMMO-PACK 19.05 2 22.5 DQ
REEL Ø 355mm 12.70 1 10.0/15.0 GY
REEL Ø 500mm 12.70 1 10.0/15.0 CK
REEL Ø 500mm 19.05 2 22.5/27.5 CK
Loose, short leads 4 +2 AA
Loose, long leads
(p<10mm) 17 +1/-2 Z3
Loose, long leads
(p≥15mm)
30 +5
25 +2/-1
40
50
Note: Ammo-pack is the preferred packaging for taped version.
GENERAL TECHNICAL DATA
Dielectric: polyester lm (polyethylene terephthalate).
Plates: aluminium layer deposited by evaporation under
vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame
retardant according to UL94.
Marking: Manufacturer’s logo (if requested), capacitance,
tolerance, D.C. rated voltage.
Climatic category: 55/105/56 IEC 60068-1
Operating temperature range: -55 to +105°C
Upper operating temperature of +125°C is
allow ed for a max.operating time of 1000h.
Related documents: IEC 60384-2
single sided metallized
polyester lm
Winding scheme
Loose Taped
Fig.1 Fig. 2
Ød ±0.05 p = 10 p > 10 p = 37.5
0.6 0.8 1.0
All dimensions are in mm. Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
10.0 All B +0.2 H +0.1 L +0.2
15.0 <7.5 B +0.2 H +0.1 L +0.3
15.0 ≥7.5 B +0.2 H +0.1 L +0.5
22.5 All B +0.2 H +0.1 L +0.3
27.5 All B +0.2 H +0.1 L +0.3
37.5 All B +0.3 H +0.1 L +0.3
09/2008 42
R60
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
PRODUCT CODE: R60
STACKED VERSION
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table.
*Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145).
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Rated
Cap.
50Vdc/30Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/ µs) (V2/ µs)
1.5 µF 4.0 9.0 13.0 10.0 30 3 E3 R60CF4150--6--
2.2 µF 4.0 9.0 13.0 10.0 30 3 E3 R60CF4220--6--
3.3 µF 5.0 11.0 13.0 10.0 30 3 E3 R60CF4330--6--
4.7 µF 6.0 12.0 13.0 10.0 30 3 E3 R60CF4470--6--
5.6 µF 6.0 12.0 13.0 10.0 30 3 E3 R60CF4560--6--
Rated
Cap.
63Vdc/40Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/ µs) (V2/ µs)
1.0 µF 4.0 9.0 13.0 10.0 50 6.3 E3 R60DF 4100--6--
1.5 µF 5.0 11.0 13.0 10.0 50 6.3 E3 R60DF 4150--6--
2.2 µF 5.0 11.0 13.0 10.0 50 6.3 E3 R60DF 4220--6--
3.3 µF 6.0 12.0 13.0 10.0 50 6.3 E3 R60DF 4330--6--
Rated
Cap.
100Vdc/63Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/ µs) (V2/ µs)
0.33 µF 4.0 9.0 13.0 10.0 75 15 E3 R60EF 3330--6--
0.47 µF 4.0 9.0 13.0 10.0 75 15 E3 R60EF 3470--6--
0.68 µF 4.0 9.0 13.0 10.0 75 15 E3 R60EF 3680--6--
1.0 µF 5.0 11.0 13.0 10.0 75 15 E3 R60EF 4100--6--
1.5 µF 5.0 11.0 13.0 10.0 75 15 E3 R60EF 4150--6--
Rated
Cap.
160Vdc/90Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/ µs) (V2/ µs)
0.22 µF 4.0 9.0 13.0 10.0 100 32 E3 R60GF 3220--6--
0.33 µF 4.0 9.0 13.0 10.0 100 32 E3 R60GF 3330--6--
0.47 µF 5.0 11.0 13.0 10.0 100 32 E3 R60GF 3470--6--
0.68 µF 6.0 12.0 13.0 10.0 100 32 E3 R60GF 3680--6--
Rated
Cap.
250Vdc/160Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/ µs) (V2/ µs)
0.10 µF 4.0 9.0 13.0 10.0 150 75 E3 R60IF 3100--6--
0.15 µF 4.0 9.0 13.0 10.0 150 75 E3 R60IF 3150--6--
0.22 µF 5.0 11.0 13.0 10.0 150 75 E3 R60IF 3220--6--
0.33 µF 5.0 11.0 13.0 10.0 150 75 E3 R60IF 3330--6--
0.47 µF 6.0 12.0 13.0 10.0 150 75 E3 R60IF 3470--6--
Rated
Cap.
400Vdc/200Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/ µs) (V2/ µs)
0.033 µF 4.0 9.0 13.0 10.0 175 140 E3 R60ΜF 2330--6--
0.047 µF 4.0 9.0 13.0 10.0 175 140 E3 R60ΜF 2470--6--
0.068 µF 4.0 9.0 13.0 10.0 175 140 E3 R60ΜF 2680--6--
0.10 µF 5.0 11.0 13.0 10.0 175 140 E3 R60ΜF 3100--6--
0.15 µF 6.0 12.0 13.0 10.0 175 140 E3 R60ΜF 3150--6--
Rated
Cap.
630Vdc/220Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/ µs) (V2/ µs)
0.010 µF 4.0 9.0 13.0 10.0 200 250 E3 R60PF 2100--6--
0.015 µF 4.0 9.0 13.0 10.0 200 250 E3 R60PF 2150--6--
0.022 µF 4.0 9.0 13.0 10.0 200 250 E3 R60PF 2220--6--
0.033 µF 5.0 11.0 13.0 10.0 200 250 E3 R60PF 2330--6--
0.047 µF 5.0 11.0 13.0 10.0 200 250 E3 R60PF 2470--6--
09/2008
43
R60
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
PRODUCT CODE: R60
WOUND VERSION
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table.
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
All dimensions are in mm.
Rated
Cap.
63Vdc/40Vac
Std dimensions
Max dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
0.68 µF 5.0 11.0 18.0 15.0 2.5 0.32 E3 R60DI 3680--3--
1.0 µF 5.0 11.0 18.0 15.0 2.5 0.32 E3 R60DI 4100--3--
1.5 µF 5.0 11.0 18.0 15.0 2.5 0.32 E3 R60DI 4150--3--
2.2 µF 6.0 12.0 18.0 15.0 2.5 0.32 E3 R60DI 4220--3--
3.3 µF 7.5 13.5 18.0 15.0 2.5 0.32 E3 R60DI 4330--3--
3.3 µF 9.0 12.5 18.0 15.0 2.5 0.32 E3 R60DI 4330--L--
4.7 µF 8.5 14.5 18.0 15.0 2.5 0.32 E3 R60DI 4470--3--
4.7 µF 13.0 12.0 18.0 15.0 2.5 0.32 E3 R60DI 4470--L--
6.8 µF 10.0 16.0 18.0 15.0 2.5 0.32 E3 R60DI 4680--3--
3.3 µF 6.0 15.0 26.5 22.5 1.5 0.19 E3 R60DN4330--3--
4.7 µF 7.0 16.0 26.5 22.5 1.5 0.19 E3 R60DN4470--3--
6.8 µF 7.0 16.0 26.5 22.5 1.5 0.19 E3 R60DN4680--3--
10.0 µF 8.5 17.0 26.5 22.5 1.5 0.19 E3 R60DN5100--3--
15.0 µF 11.0 20.0 26.5 22.5 1.5 0.19 E3 R60DN5150--3--
10.0 µF 9.0 17.0 32.0 27.5 1.0 0.13 E3 R60DR5100--3--
15.0 µF 9.0 17.0 32.0 27.5 1.0 0.13 E3 R60DR5150--4--
22.0 µF 11.0 20.0 32.0 27.5 1.0 0.13 E3 R60DR5220--4--
33.0 µF 13.0 22.0 32.0 27.5 1.0 0.13 E3 R60DR5330--4--
47.0 µF 14.0 28.0 32.0 27.5 1.0 0.13 E3 R60DR5470--4--
68.0 µF 18.0 33.0 32.0 27.5 1.0 0.13 E3 R60DR5680--4--
100.0 µF 22.0 37.0 32.0 27.5 1.0 0.13 E3 R60DR6100--0--
22.0 µF 11.0 22.0 41.5 37.5 0.8 0.10 E3 R60DW5220--3--
33.0 µF 11.0 22.0 41.5 37.5 0.8 0.10 E3 R60DW5330--4--
47.0 µF 13.0 24.0 41.5 37.5 0.8 0.10 E3 R60DW5470--4--
68.0 µF 19.0 32.0 41.5 37.5 0.8 0.10 E3 R60DW5680--3--
100.0 µF 19.0 32.0 41.5 37.5 0.8 0.10 E3 R60DW6100--4--
150.0 µF 20.0 40.0 41.5 37.5 0.8 0.10 E3 R60DW6150--0--
220.0 µF 24.0 44.0 41.5 37.5 0.8 0.10 E3 R60DW6220--0--
Rated
Cap.
100Vdc/63Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2/µs)
0.33 µF 5.0 11.0 18.0 15.0 3.0 0.6 E3 R60EI 3330--3--
0.47 µF 5.0 11.0 18.0 15.0 3.0 0.6 E3 R60EI 3470--3--
0.68 µF 5.0 11.0 18.0 15.0 3.0 0.6 E3 R60EI 3680--3--
1.0 µF 5.0 11.0 18.0 15.0 3.0 0.6 E3 R60EI 4100--3--
1.5 µF 7.5 13.5 18.0 15.0 3.0 0.6 E3 R60EI 4150--3--
2.2 µF 8.5 14.5 18.0 15.0 3.0 0.6 E3 R60EI 4220--3--
2.2 µF 9.0 12.5 18.0 15.0 3.0 0.6 E3 R60EI 4220--L--
3.3 µF 10.0 16.0 18.0 15.0 3.0 0.6 E3 R60EI 4330--3--
3.3 µF 13.0 12.0 18.0 15.0 3.0 0.6 E3 R60EI 4330--L--
4.7 µF 11.0 19.0 18.0 15.0 3.0 0.6 E3 R60EI 4470--3--
1.5 µF 6.0 15.0 26.5 22.5 2.0 0.4 E3 R60EN 4150--3--
2.2 µF 6.0 15.0 26.5 22.5 2.0 0.4 E3 R60EN 4220--3--
3.3 µF 7.0 16.0 26.5 22.5 2.0 0.4 E3 R60EN 4330--3--
4.7 µF 8.5 17.0 26.5 22.5 2.0 0.4 E3 R60EN 4470--3--
6.8 µF 10.0 18.5 26.5 22.5 2.0 0.4 E3 R60EN 4680--3--
10.0 µF 13.0 22.0 26.5 22.5 2.0 0.4 E3 R60EN 5100--3--
4.7 µF 9.0 17.0 32.0 27.5 1.5 0.3 E3 R60ER 4470--3--
6.8 µF 9.0 17.0 32.0 27.5 1.5 0.3 E3 R60ER 4680--3--
10.0 µF 9.0 17.0 32.0 27.5 1.5 0.3 E3 R60ER 5100--4--
15.0 µF 11.0 20.0 32.0 27.5 1.5 0.3 E3 R60ER 5150--4--
22.0 µF 13.0 22.0 32.0 27.5 1.5 0.3 E3 R60ER 5220--4--
33.0 µF 14.0 28.0 32.0 27.5 1.5 0.3 E3 R60ER 5330--4--
47.0 µF 18.0 33.0 32.0 27.5 1.5 0.3 E3 R60ER 5470--4--
68.0 µF 22.0 37.0 32.0 27.5 1.5 0.3 E3 R60ER 5680--0--
15.0 µF 11.0 22.0 41.5 37.5 1.0 0.2 E3 R60EW5150--4--
22.0 µF 11.0 22.0 41.5 37.5 1.0 0.2 E3 R60EW5220--4--
33.0 µF 13.0 24.0 41.5 37.5 1.0 0.2 E3 R60EW5330--4--
47.0 µF 16.0 28.5 41.5 37.5 1.0 0.2 E3 R60EW5470--4--
68.0 µF 19.0 32.0 41.5 37.5 1.0 0.2 E3 R60EW5680--5--
100.0 µF 20.0 40.0 41.5 37.5 1.0 0.2 E3 R60EW6100--0--
150.0 µF 24.0 44.0 41.5 37.5 1.0 0.2 E3 R60EW6150--0--
Rated
Cap.
160Vdc/90Vac
Std dimensions
Max dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
0.33 µF 5.0 11.0 18.0 15.0 9.0 2.90 E3 R60GI 3330--3--
0.47 µF 5.0 11.0 18.0 15.0 9.0 2.90 E3 R60GI 3470--3--
0.68 µF 5.0 11.0 18.0 15.0 9.0 2.90 E3 R60GI 3680--3--
1.0 µF 7.5 13.5 18.0 15.0 9.0 2.90 E3 R60GI 4100--3--
1.5 µF 8.5 14.5 18.0 15.0 9.0 2.90 E3 R60GI 4150--3--
1.5 µF 9.0 12.5 18.0 15.0 9.0 2.90 E3 R60GI 4150--L--
2.2 µF 10.0 16.0 18.0 15.0 9.0 2.90 E3 R60GI 4220--3--
2.2 µF 13.0 12.0 18.0 15.0 9.0 2.90 E3 R60GI 4220--L--
3.3 µF 11.0 19.0 18.0 15.0 9.0 2.90 E3 R60GI 4330--3--
1.5 µF 6.0 15.0 26.5 22.5 5.5 1.70 E3 R60GN4150--3--
2.2 µF 7.0 16.0 26.5 22.5 5.5 1.70 E3 R60GN4220--3--
3.3 µF 8.5 17.0 26.5 22.5 5.5 1.70 E3 R60GN4330--3--
4.7 µF 11.0 20.0 26.5 22.5 5.5 1.70 E3 R60GN4470--3--
6.8 µF 13.0 22.0 26.5 22.5 5.5 1.70 E3 R60GN4680--3--
3.3 µF 9.0 17.0 32.0 27.5 3.0 0.96 E3 R60GR4330--3--
4.7 µF 9.0 17.0 32.0 27.5 3.0 0.96 E3 R60GR4470--3--
6.8 µF 9.0 17.0 32.0 27.5 3.0 0.96 E3 R60GR4680--4--
10.0 µF 9.0 17.0 32.0 27.5 3.0 0.96 E3 R60GR5100--4--
15.0 µF 11.0 20.0 32.0 27.5 3.0 0.96 E3 R60GR5150--4--
22.0 µF 13.0 22.0 32.0 27.5 3.0 0.96 E3 R60GR5220--4--
33.0 µF 14.0 28.0 32.0 27.5 3.0 0.96 E3 R60GR5330--0--
47.0 µF 18.0 33.0 32.0 27.5 3.0 0.96 E3 R60GR5470--0--
68.0 µF 22.0 37.0 32.0 27.5 3.0 0.96 E3 R60GR5680--0--
10.0 µF 11.0 22.0 41.5 37.5 2.0 0.64 E3 R60GW5100--3--
15.0 µF 11.0 22.0 41.5 37.5 2.0 0.64 E3 R60GW5150--4--
22.0 µF 11.0 22.0 41.5 37.5 2.0 0.64 E3 R60GW5220--4--
33.0 µF 13.0 24.0 41.5 37.5 2.0 0.64 E3 R60GW5330--4--
47.0 µF 16.0 28.5 41.5 37.5 2.0 0.64 E3 R60GW5470--4--
68.0 µF 19.0 32.0 41.5 37.5 2.0 0.64 E3 R60GW5680--0--
100.0 µF 20.0 40.0 41.5 37.5 2.0 0.64 E3 R60GW6100--0--
150.0 µF 30.0 45.0 41.5 37.5 2.0 0.64 E3 R60GW6150--0--
Rated
Cap.
250Vdc/160Vac
Std dimensions
Max dv/dt Max K0Part Number
B H L p (V/µs) (V2/µs)
0.10 µF 5.0 11.0 18.0 15.0 12 6.0 E3 R60II 3100--3--
0.15 µF 5.0 11.0 18.0 15.0 12 6.0 E3 R60II 3150--3--
0.22 µF 5.0 11.0 18.0 15.0 12 6.0 E3 R60II 3220--3--
0.33 µF 5.0 11.0 18.0 15.0 12 6.0 E3 R60II 3330--3--
0.47 µF 6.0 12.0 18.0 15.0 12 6.0 E3 R60II 3470--3--
0.68 µF 7.5 13.5 18.0 15.0 12 6.0 E3 R60II 3680--3--
0.68 µF 9.0 12.5 18.0 15.0 12 6.0 E3 R60II 3680--L--
1.0 µF 8.5 14.5 18.0 15.0 12 6.0 E3 R60II 4100--3--
1.0 µF 13.0 12.0 18.0 15.0 12 6.0 E3 R60II 4100--L--
1.5 µF 10.0 16.0 18.0 15.0 12 6.0 E3 R60II 4150--3--
0.47 µF 6.0 15.0 26.5 22.5 8 4.0 E3 R60IN 3470--3--
0.68 µF 6.0 15.0 26.5 22.5 8 4.0 E3 R60IN 3680--3--
1.0 µF 6.0 15.0 26.5 22.5 8 4.0 E3 R60IN 4100--3--
1.5 µF 7.0 16.0 26.5 22.5 8 4.0 E3 R60IN 4150--3--
2.2 µF 10.0 18.5 26.5 22.5 8 4.0 E3 R60IN 4220--3--
3.3 µF 11.0 20.0 26.5 22.5 8 4.0 E3 R60IN 4330--3--
1.5 µF 9.0 17.0 32.0 27.5 5 2.5 E3 R60IR 4150--3--
2.2 µF 9.0 17.0 32.0 27.5 5 2.5 E3 R60IR 4220--3--
3.3 µF 9.0 17.0 32.0 27.5 5 2.5 E3 R60IR 4330--4--
4.7 µF 9.0 17.0 32.0 27.5 5 2.5 E3 R60IR 4470--4--
6.8 µF 11.0 20.0 32.0 27.5 5 2.5 E3 R60IR 4680--4--
10.0 µF 13.0 22.0 32.0 27.5 5 2.5 E3 R60IR 5100--4--
15.0 µF 14.0 28.0 32.0 27.5 5 2.5 E3 R60IR 5150--4--
22.0 µF 18.0 33.0 32.0 27.5 5 2.5 E3 R60IR 5220--0--
33.0 µF 22.0 37.0 32.0 27.5 5 2.5 E3 R60IR 5330--0--
4.7 µF 11.0 22.0 41.5 37.5 4 2.0 E3 R60IW 4470--3--
6.8 µF 11.0 22.0 41.5 37.5 4 2.0 E3 R60IW 4680--4--
10.0 µF 11.0 22.0 41.5 37.5 4 2.0 E3 R60IW 5100--4--
15.0 µF 13.0 24.0 41.5 37.5 4 2.0 E3 R60IW 5150--4--
22.0 µF 16.0 28.5 41.5 37.5 4 2.0 E3 R60IW 5220--4--
33.0 µF 19.0 32.0 41.5 37.5 4 2.0 E3 R60IW 5330--4--
47.0 µF 20.0 40.0 41.5 37.5 4 2.0 E3 R60IW 5470--0--
68.0 µF 24.0 44.0 41.5 37.5 4 2.0 E3 R60IW 5680--0--
09/2008 44
Rated
Cap.
400Vdc/200Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2/µs)
0.015 µF 4.0 9.0 13.0 10.0 30.0 24.0 E3 R60MF2150--3--
0.022 µF 4.0 9.0 13.0 10.0 30.0 24.0 E3 R60MF 2220--3--
0.033 µF 4.0 9.0 13.0 10.0 30.0 24.0 E3 R60MF 2330--3--
0.047 µF 4.0 9.0 13.0 10.0 30.0 24.0 E3 R60MF 2470--3--
0.068 µF 4.0 9.0 13.0 10.0 30.0 24.0 E3 R60MF 2680--4--
0.068 µF 5.0 11.0 13.0 10.0 30.0 24.0 E3 R60MF 2680--3--
0.10 µF 5.0 11.0 13.0 10.0 30.0 24.0 E3 R60MF 3100--4--
0.10 µF 6.0 12.0 13.0 10.0 30.0 24.0 E3 R60MF 3100--3--
0.15 µF 6.0 12.0 13.0 10.0 30.0 24.0 E3 R60MF 3150--3--
0.022 µF 5.0 11.0 18.0 15.0 20.0 16.0 E3 R60MI 2220--3--
0.047 µF 5.0 11.0 18.0 15.0 20.0 16.0 E3 R60MI 2470--3--
0.068 µF 5.0 11.0 18.0 15.0 20.0 16.0 E3 R60MI 2680--3--
0.10 µF 5.0 11.0 18.0 15.0 20.0 16.0 E3 R60MI 3100--3--
0.15 µF 5.0 11.0 18.0 15.0 20.0 16.0 E3 R60MI 3150--3--
0.22 µF 5.0 11.0 18.0 15.0 20.0 16.0 E3 R60MI 3220--4--
0.22 µF 6.0 12.0 18.0 15.0 20.0 16.0 E3 R60MI 3220--3--
0.33 µF 7.5 13.5 18.0 15.0 20.0 16.0 E3 R60MI 3330--3--
0.33 µF 9.0 12.5 18.0 15.0 20.0 16.0 E3 R60MI 3330--L--
0.47 µF 7.5 13.5 18.0 15.0 20.0 16.0 E3 R60MI 3470--4--
0.47 µF 8.5 14.5 18.0 15.0 20.0 16.0 E3 R60MI 3470--3--
0.47 µF 9.0 12.5 18.0 15.0 20.0 16.0 E3 R60MI 3470--L1-
0.47 µF 13.0 12.0 18.0 15.0 20.0 16.0 E3 R60MI 3470--L--
0.68 µF 10.0 16.0 18.0 15.0 20.0 16.0 E3 R60MI 3680--4--
0.68 µF 11.0 19.0 18.0 15.0 20.0 16.0 E3 R60MI 3680--3--
0.68 µF 13.0 12.0 18.0 15.0 20.0 16.0 E3 R60MI 3680--L--
1.0 µF 11.0 19.0 18.0 15.0 20.0 16.0 E3 R60MI 4100--3--
0.22 µF 6.0 15.0 26.5 22.5 10.0 8.0 E3 R60MN3220--3--
0.33 µF 6.0 15.0 26.5 22.5 10.0 8.0 E3 R60MN3330--3--
0.47 µF 6.0 15.0 26.5 22.5 10.0 8.0 E3 R60MN3470--3--
0.68 µF 6.0 15.0 26.5 22.5 10.0 8.0 E3 R60MN3680--4--
0.68 µF 7.0 16.0 26.5 22.5 10.0 8.0 E3 R60MN3680--3--
1.0 µF 8.5 17.0 26.5 22.5 10.0 8.0 E3 R60MN4100--4--
1.0 µF 10.0 18.5 26.5 22.5 10.0 8.0 E3 R60MN4100--3--
1.5 µF 10.0 18.5 26.5 22.5 10.0 8.0 E3 R60MN4150--4--
1.5 µF 11.0 20.0 26.5 22.5 10.0 8.0 E3 R60MN4150--3--
2.2 µF 13.0 22.0 26.5 22.5 10.0 8.0 E3 R60MN4220--3--
0.68 µF 9.0 17.0 32.0 27.5 8.5 3.4 E3 R60MR3680--3--
1.0 µF 9.0 17.0 32.0 27.5 8.5 3.4 E3 R60MR4100--3--
1.5 µF 9.0 17.0 32.0 27.5 8.5 3.4 E3 R60MR4150--4--
2.2 µF 11.0 20.0 32.0 27.5 8.5 3.4 E3 R60MR4220--4--
3.3 µF 13.0 22.0 32.0 27.5 8.5 3.4 E3 R60MR4330--4--
4.7 µF 14.0 28.0 32.0 27.5 8.5 3.4 E3 R60MR4470--4--
6.8 µF 18.0 33.0 32.0 27.5 8.5 3.4 E3 R60MR4680--4--
10.0 µF 22.0 37.0 32.0 27.5 8.5 3.4 E3 R60MR5100--4--
3.3 µF 11.0 22.0 41.5 37.5 6.0 2.4 E3 R60MW4330--3--
4.7 µF 11.0 22.0 41.5 37.5 6.0 2.4 E3 R60MW4470--4--
6.8 µF 13.0 24.0 41.5 37.5 6.0 2.4 E3 R60MW4680--4--
10.0 µF 16.0 28.5 41.5 37.5 6.0 2.4 E3 R60MW5100--4--
15.0 µF 24.0 44.0 41.5 37.5 6.0 2.4 E3 R60MW5150--3--
22.0 µF 24.0 44.0 41.5 37.5 6.0 2.4 E3 R60MW5220--4--
33.0 µF 30.0 45.0 41.5 37.5 6.0 2.4 E3 R60MW5330--4--
WOUND VERSION
Rated
Cap.
630Vdc/220*Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2/µs)
4700 pF 4.0 9.0 13.0 10.0 40 50 E3 R60PF 1470--3--
6800 pF 4.0 9.0 13.0 10.0 40 50 E3 R60PF 1680--3--
0.010 µF 4.0 9.0 13.0 10.0 40 50 E3 R60PF 2100--3--
0.015 µF 4.0 9.0 13.0 10.0 40 50 E3 R60PF 2150--3--
0.022 µF 4.0 9.0 13.0 10.0 40 50 E3 R60PF 2220--4--
0.022 µF 5.0 11.0 13.0 10.0 40 50 E3 R60PF 2220--3--
0.033 µF 5.0 11.0 13.0 10.0 40 50 E3 R60PF 2330--4--
0.033 µF 6.0 12.0 13.0 10.0 40 50 E3 R60PF 2330--3--
0.047 µF 6.0 12.0 13.0 10.0 40 50 E3 R60PF 2470--3--
0.033 µF 5.0 11.0 18.0 15.0 25 31 E3 R60PI 2330--3--
0.047 µF 5.0 11.0 18.0 15.0 25 31 E3 R60PI 2470--3--
0.068 µF 5.0 11.0 18.0 15.0 25 31 E3 R60PI 2680--4--
0.068 µF 6.0 12.0 18.0 15.0 25 31 E3 R60PI 2680--3--
0.10 µF 6.0 12.0 18.0 15.0 25 31 E3 R60PI 3100--4--
0.10 µF 7.5 13.5 18.0 15.0 25 31 E3 R60PI 3100--3--
0.10 µF 9.0 12.5 18.0 15.0 25 31 E3 R60PI 3100--L--
0.15 µF 7.5 13.5 18.0 15.0 25 31 E3 R60PI 3150--4--
0.15 µF 8.5 14.5 18.0 15.0 25 31 E3 R60PI 3150--3--
0.22 µF 8.5 14.5 18.0 15.0 25 31 E3 R60PI 3220--4--
0.22 µF 10.0 16.0 18.0 15.0 25 31 E3 R60PI 3220--3--
0.33 µF 10.0 16.0 18.0 15.0 25 31 E3 R60PI 3330--3--
0.10 µF 6.0 15.0 26.5 22.5 12 15 E3 R60PN 3100--3--
0.15 µF 6.0 15.0 26.5 22.5 12 15 E3 R60PN 3150--3--
0.22 µF 6.0 15.0 26.5 22.5 12 15 E3 R60PN 3220--4--
0.22 µF 7.0 16.0 26.5 22.5 12 15 E3 R60PN 3220--3--
0.33 µF 7.0 16.0 26.5 22.5 12 15 E3 R60PN 3330--5--
0.33 µF 8.5 17.0 26.5 22.5 12 15 E3 R60PN 3330--4--
0.33 µF 10.0 18.5 26.5 22.5 12 15 E3 R60PN 3330--3--
0.47 µF 10.0 18.5 26.5 22.5 12 15 E3 R60PN 3470--4--
0.47 µF 11.0 20.0 26.5 22.5 12 15 E3 R60PN 3470--3--
0.68 µF 11.0 20.0 26.5 22.5 12 15 E3 R60PN 3680--4--
0.68 µF 13.0 22.0 26.5 22.5 12 15 E3 R60PN 3680--3--
0.33 µF 9.0 17.0 32.0 27.5 10 12 E3 R60PR 3330--3--
0.47 µF 9.0 17.0 32.0 27.5 10 12 E3 R60PR 3470--4--
0.68 µF 11.0 20.0 32.0 27.5 10 12 E3 R60PR 3680--4--
1.0 µF 11.0 20.0 32.0 27.5 10 12 E3 R60PR 4100--5--
1.5 µF 18.0 33.0 32.0 27.5 10 12 E3 R60PR 4150--3--
2.2 µF 18.0 33.0 32.0 27.5 10 12 E3 R60PR 4220--4--
3.3 µF 22.0 37.0 32.0 27.5 10 12 E3 R60PR 4330--4--
4.7 µF 22.0 37.0 32.0 27.5 10 12 E3 R60PR 4470--4--
1.0 µF 11.0 22.0 41.5 37.5 8 9.6 E3 R60PW4100--3--
1.5 µF 11.0 22.0 41.5 37.5 8 9.6 E3 R60PW4150--4--
2.2 µF 13.0 24.0 41.5 37.5 8 9.6 E3 R60PW4220--4--
3.3 µF 16.0 28.5 41.5 37.5 8 9.6 E3 R60PW4330--4--
4.7 µF 19.0 32.0 41.5 37.5 8 9.6 E3 R60PW4470--4--
6.8 µF 20.0 40.0 41.5 37.5 8 9.6 E3 R60PW4680--0--
10.0 µF 24.0 44.0 41.5 37.5 8 9.6 E3 R60PW5100--4--
R60
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
PRODUCT CODE: R60
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table.
* Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145).
09/2008
45
R60
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
PRODUCT CODE: R60
WOUND VERSION
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
All dimensions are in mm.
Note 1: If the working voltage (V) is lower than the rated
voltage (VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with
the ratio VR /V. The pulse characteristic K0 depends
on the voltage wave-form and in any case it cannot
overcome the value given in the above table.
Note 2: Rated voltages higher than 1000Vdc are available
upon request.
* Not suitable for across-the-line applications. Please refer to
Interference Suppression Capacitors (page 151).
Rated
Cap.
1000Vdc/250Vac*
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2/µs)
1000 pF 4.0 9.0 13.0 10.0 60 120 E3 R60QF 1100--0--
1500 pF 4.0 9.0 13.0 10.0 60 120 E3 R60QF 1150--0--
2200 pF 4.0 9.0 13.0 10.0 60 120 E3 R60QF 1220--0--
3300 pF 4.0 9.0 13.0 10.0 60 120 E3 R60QF 1330--0--
4700 pF 5.0 11.0 13.0 10.0 60 120 E3 R60QF 1470--0--
6800 pF 6.0 12.0 13.0 10.0 60 120 E3 R60QF 1680--0--
0.010 µF 5.0 11.0 18.0 15.0 30 60 E3 R60QI 2100--0--
0.015 µF 5.0 11.0 18.0 15.0 30 60 E3 R60QI 2150--3--
0.022µF 6.0 12.0 18.0 15.0 30 60 E3 R60QI 2220--3--
0.033 µF 7.5 13.5 18.0 15.0 30 60 E3 R60QI 2330--3--
0.033 µF 9.0 12.5 18.0 15.0 30 60 E3 R60QI 2330--L--
0.047 µF 10.0 16.0 18.0 15.0 30 60 E3 R60QI 2470--0--
0.047 µF 13.0 12.0 18.0 15.0 30 60 E3 R60QI 2470--L--
0.068 µF 11.0 19.0 18.0 15.0 30 60 E3 R60QI 2680--0--
0.033 µF 6.0 15.0 26.5 22.5 15 30 E3 R60QN2330--0--
0.047 µF 6.0 15.0 26.5 22.5 15 30 E3 R60QN2470--0--
0.068 µF 7.0 16.0 26.5 22.5 15 30 E3 R60QN2680--3--
0.10 µF 8.5 17.0 26.5 22.5 15 30 E3 R60QN3100--3--
0.15 µF 13.0 22.0 26.5 22.5 15 30 E3 R60QN3150--0--
0.15 µF 9.0 17.0 32.0 27.5 12 24 E3 R60QR3150--3--
0.22 µF 9.0 17.0 32.0 27.5 12 24 E3 R60QR3220--4--
0.33 µF 11.0 20.0 32.0 27.5 12 24 E3 R60QR3330--4--
0.47 µF 13.0 22.0 32.0 27.5 12 24 E3 R60QR3470--4--
0.68 µF 14.0 28.0 32.0 27.5 12 24 E3 R60QR3680--4--
1.00 µF 18.0 33.0 32.0 27.5 12 24 E3 R60QR4100--4--
1.50 µF 22.0 37.0 32.0 27.5 12 24 E3 R60QR4150--4--
0.47 µF 11.0 22.0 41.5 37.5 10 20 E3 R60QW3470--3--
0.68 µF 11.0 22.0 41.5 37.5 10 20 E3 R60QW3680--4--
1.00 µF 13.0 24.0 41.5 37.5 10 20 E3 R60QW4100--4--
1.50 µF 16.0 28.5 41.5 37.5 10 20 E3 R60QW4150--4--
2.20 µF 19.0 32.0 41.5 37.5 10 20 E3 R60QW4220--3--
3.30 µF 24.0 44.0 41.5 37.5 10 20 E3 R60QW4330--0--
4.70 µF 30.0 45.0 41.5 37.5 10 20 E3 R60QW4470--4--
09/2008 46
R60
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
PRODUCT CODE: R60
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 050Vdc - 63Vdc -100Vdc - 160Vdc
- 250Vdc - 400Vdc - 630Vdc-1000Vdc .
Rated temperature (TR): +85°C
Temperature derated voltage:
for temperatures between +85°C and +125°C
a decreasing factor of 1.25% per degree °C on the rated
voltage VR (d.c. and a.c.) has to be applied.
Capacitance range: 1000pF to 220µF
Capacitance values:
E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±5% (J); ±10% (K); ±20% (M).
Total self-inductance (L): (lead length ~2mm)
Pitch (mm) 10 15 22.5 27.5 37.5
L(nH) ≈ 9 10 18 18 22
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C
kHz C≤1µF C>1µF
1
10
≤100
≤150
≤100
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 50 Vdc for VR <100 Vdc
100 Vdc for VR ≥100 Vdc
Performance
For VR ≤100 Vdc
≥3750 MΩ for C ≤0.33µF (50000 MΩ)*
≥1250 s for C >0.33µF (5000 s)*
For VR >100 Vdc
≥30000 MΩ for C ≤0.33µF (50000 MΩ)*
≥10000 s for C >0.33µF (17000 s)*
*Typical value
Test voltage between terminations:
1.6xVR applied for 2 s at +25°C±5°C
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Performance
Capacitance change |∆C/C|: ≤5%
DF change (∆tgδ): ≤50x10-4 at 1kHz
Insulation resistance: ≥50% of initial limit.
Endurance:
Test conditions
Temperature: +105°C±2°C
Test duration: 2000 h
Voltage applied: 1.25xVC
Performance
Capacitance change |∆C/C|: ≤5%
DF change (∆tgδ): ≤50x10-4 at 10kHz for C≤1µF
≤30x10-4 at 01kHz for C>1µF
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C±5°C
Dipping time (with heat screen):10 s ±1 s
Performance
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ): ≤50x10-4 at 10kHz for C≤1µF
≤30x10-4 at 01kHz for C>1µF
Insulation resistance: ≥ initial limit.
Long term stability (after two years):
Storage: standard environmental conditions (see page 12).
Performance
Capacitance change |∆C/C|: ≤3% for C ≤0.1µF
≤2% for C >0.1µF
RELIABILITY:
Reference MIL HDB 217
Application conditions:
Temperature: +40°C±2°C
Voltage: 0.5xVR
Failure rate: ≤5 FIT
(1 FIT = 1x10-9 failures/componentsxh)
Failure criteria:
Short or open circuit
Capacitance change |∆C/C|: >10%
DF change (∆tgδ): >2xinitial limit.
Insulation resistance: <0.005xinitial limit.
09/2008
47
R60
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
PRODUCT CODE: R60
MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)
Note: p (pitch) in mm.
09/2008 48
R60
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
PRODUCT CODE: R60
MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)
Note: p (pitch) in mm.