Original Creation Date: 04/22/96
Last Update Date: 07/30/96
Last Major Revision Date: 04/22/96
MN54F283-X REV 1A0 MILITARY DATA SHEET
4-BIT FULL ADDER WITH FAST CARRY
General Description
The F283 high-speed 4-bit binary full adder with internal carry lookahead accepts two
4-bit binary words (A0-A3, B0-B3) and a Carry input (C0). It generates the binary Sum
outputs (S0-S3), and the Carry output (C4) from the most significant bit. The F283 will
operate with either active HIGH or active LOW operands (positive or negative logic).
NS Part Numbers
54F283DMQB
54F283FMQB
54F283LMQB
Industry Part Number
54F283
Prime Die
M283
Processing
MIL-STD-883, Method 5004
Quality Conformance Inspection
MIL-STD-883, Method 5005
Subgrp Description Temp ( C)
o
1 Static tests at +25
2 Static tests at +125
3 Static tests at -55
4 Dynamic tests at +25
5 Dynamic tests at +125
6 Dynamic tests at -55
7 Functional tests at +25
8A Functional tests at +125
8B Functional tests at -55
9 Switching tests at +25
10 Switching tests at +125
11 Switching tests at -55
1
MILITARY DATA SHEET
MN54F283-X REV 1A0
Features
- Guaranteed 4000V minimum ESD protection
2
MILITARY DATA SHEET
MN54F283-X REV 1A0
(Absolute Maximum Ratings)
(Note 1)
Storage Temperature -65C to +150C
Ambient Temperture under Bias -55C to +125C
Junction Temperature unde Bias -55C to +175C
Vcc Pin Potential to Ground Pin -0.5V to +7.0V
Input Voltage -0.5V to +7.0VNote 2
Input Current -30 mA to +5.0 mANote 2
Voltage Applied to Output in HIGH State (with Vcc=0V) -0.5V to VccStandard Output -0.5V to +5.5VTRI-STATE Output
Current Applied to Output in LOW State (Max) twice the rated Iol (mA)
ESD Last Passing Voltage (Min) 4000 V
Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have
its useful life impaired. Functional operation under these conditions is not
implied.
Note 2: Either voltage limit or current limit is sufficient to protect inputs.
Recommended Operating Conditions
Free Air Ambient Temperature 0 C to +70 CCommercial -55 C to +125 CMilitary
Supply Voltage +4.5V to +5.5VMilitary +4.5V to +5.5VCommercial
3
MN54F283-X REV 1A0 MILITARY DATA SHEET
Electrical Characteristics
DC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: VCC 4.5V to 5.5V, Temp range: -55C to 125C
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
IIH Input High
Current VCC=5.5V, VM=2.7V, VINH=5.5V,
VINL=0.0V 1, 3 INPUTS 20 uA 1, 2,
3
IBVI Input High
Current VCC=5.5V, VM=7.0V, VINH=5.5V,
VINL=0.0V 1, 3 INPUTS 100 uA 1, 2,
3
IIL Input LOW Current VCC=5.5V, VM=0.5V, VINH=5.5V (Co) 1, 3 INPUTS -0.6 mA 1, 2,
3
VCC= 5.5V, VM=0.5V, VINH=5.5V (An,Bn) 1, 3 INPUTS -1.2 mA 1, 2,
3
VOL Output LOW
Voltage VCC=4.5V, VIL=0.8V, IOL=20mA,
VINH=5.5V 1, 3 OUTPUTS 0.5 V 1, 2,
3
VOH Output HIGH
Voltage VCC=4.5V, VIH=2.0V, IOH=-1.0mA 1, 3 OUTPUTS 2.5 V 1, 2,
3
IOS Output
Short-Circuit
Current
VCC=5.5V, VINH=5.5V, VINL=0.0V,
VM=0.0V 1, 3 OUTPUTS -60 -150 mA 1, 2,
3
VCD Input Clamp Diode
Voltage VCC=4.5V, IM=-18mA, VINH=5.5V 1, 3 INPUTS -1.2 V 1, 2,
3
ICC Power Supply
Current VCC=5.5V, VINL=0.0V, VINH=5.5V 1, 3 VCC 55 mA 1, 2,
3
ICEX Output HIGH
Leakage Current VCC=5.5V, VINL=0.0V, VINH=5.5V,
VM=5.5V 1, 3 OUTPUTS 250 uA 1, 2,
3
4
MN54F283-X REV 1A0 MILITARY DATA SHEET
Electrical Characteristics
AC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
tpLH(1) Propagation Delay VCC=5.5V @25C, VCC=4.5V & 5.5V @
-55/125C 2, 4 C0 to
Sn 3.5 9.5 ns 9
2, 4 C0 to
Sn 3.5 14.0 ns 10, 11
tpHL(1) Propagation Delay VCC=5.0V @ 25C, VCC=4.5V & 5.5V @
-55/125C 2, 4 C0 to
Sn 3.0 9.5 ns 9
2, 4 C0 to
Sn 3.0 14.0 ns 10, 11
tpLH(2) Propagation Delay VCC=5.0V @ 25C, VCC=4.5V & 5.5V @
-55/125C 2, 4 An/Bn
to Sn 3.0 9.5 ns 9
2, 4 An/Bn
to Sn 3.0 17.0 ns 10, 11
tpHL(2) Propagation Delay VCC=5.0V, VCC=4.5V & 5.5V @-55/125C 2, 4 An/Bn
to Sn 3.0 9.5 ns 9
2, 4 An/Bn
to Sn 3.0 14.0 ns 10, 11
tpLH(3) Propagation Delay VCC=5.0V @ 25C, VCC=4.5V & 5.5V @
-55/125C 2, 4 C0 to
C4 3.0 7.5 ns 9
2, 4 C0 to
C4 3.0 10.5 ns 10, 11
tpHL(3) Propagation Delay VCC=5.0V, VCC=4.5V & 5.5V @-55/125C 2, 4 C0 to
C4 3.0 7.0 ns 9
2, 4 C0 to
C4 2.5 10.0 ns 10, 11
tpLH(4) Propagation Delay VCC=5.0V @ 25C, VCC=4.5V & 5.5V @
-55/125C 2, 4 An/Bn
to C4 3.0 7.5 ns 9
2, 4 An/Bn
to C4 3.0 10.5 ns 10, 11
tpHL(4) Propagation Delay VCC=5.0V, VCC=4.5V & 5.5V @ -55/125C 2, 4 An/Bn
to C4 2.5 7.0 ns 9
2, 4 An/Bn
to C4 2.5 10.0 ns 10, 11
Note 1: Screen tested 100% on each device at -55 C, +25 C & +125 C temperature, Subgroups A1,
2, 3, 7 & 8.
Note 2: Screen tested 100% on each device at +25 C temperature only, Subgroup A9.
Note 3: Sample tested (Method 5005, Table 1) on each MFG. lot at +25 C, +125 C & -55 C temp.,
Subgroups A1, 2, 3, 7 & 8.
Note 4: Sample Tested (Method 5005, Table 1) on each MFG. lot at +25 C Subgroup A9, &
periodically at +125 C & -55 C temp., Subgroups 10 & 11.
5
