19-1155; Rev 5; 8/10 KIT ATION EVALU E L B AVAILA +2.7V, Low-Power, 12-Bit Serial ADCs in 8-Pin SO ________________________________Features The MAX1240/MAX1241 low-power, 12-bit analog-todigital converters (ADCs) are available in 8-pin packages. The MAX1240 operates with a single +2.7V to +3.6V supply, and the MAX1241 operates with a single +2.7V to +5.25V supply. Both devices feature a 7.5s successive-approximation ADC, a fast track/hold (1.5s), an on-chip clock, and a high-speed, 3-wire serial interface. Power consumption is only 37mW (VDD = 3V) at the 73ksps maximum sampling speed. A 2A shutdown mode reduces power at slower throughput rates. The MAX1240 has an internal 2.5V reference, while the MAX1241 requires an external reference. The MAX1241 accepts signals from 0V to VREF, and the reference input range includes the positive supply rail. An external clock accesses data from the 3-wire interface, which connects directly to standard microcontroller I/O ports. The interface is compatible with SPITM, QSPITM, and MICROWIRETM. Excellent AC characteristics and very low power combined with ease of use and small package size make these converters ideal for remote-sensor and dataacquisition applications, or for other circuits with demanding power consumption and space requirements. The MAX1240/MAX1241 are available in 8-pin PDIP and SO packages. Single-Supply Operation: +2.7V to +3.6V (MAX1240) +2.7V to +5.25V (MAX1241) 12-Bit Resolution Internal 2.5V Reference (MAX1240) Small Footprint: 8-Pin PDIP/SO Packages Low Power: 3.7W (73ksps, MAX1240) 3mW (73ksps, MAX1241) 66W (1ksps, MAX1241) 5W (power-down mode) Internal Track/Hold SPI/QSPI/MICROWIRE 3-Wire Serial Interface Internal Clock Ordering Information PART* TEMP RANGE Battery-Powered Systems Portable Data Logging Isolated Data Acquisition INL (LSB) MAX1240ACPA+ 0C to +70C 8 PDIP 1/2 MAX1240BCPA+ 0C to +70C 8 PDIP 1 MAX1240CCPA+ 0C to +70C 8 PDIP 1 MAX1240ACSA+ 0C to +70C 8 SO 1/2 MAX1240BCSA+ 0C to +70C 8 SO 1 MAX1240CCSA+ 0C to +70C 8 SO 1 0C to +70C Dice* 1 -40C to +85C 8 SO 1/2 MAX1240CC/D MAX1240AESA/V+** Applications PINPACKAGE MAX1240BESA/V+ -40C to +85C 8 SO 1 Ordering Information continued at end of data sheet. *Dice are specified at TA = +25C, DC parameters only. **Future product--contact factory for availability. /V denotes an automotive qualified part. +Denotes a lead(Pb)-free/RoHS-compliant package. Process Control Functional Diagram Instrumentation VDD 1 Pin Configuration CS SCLK TOP VIEW SHDN VDD 1 AIN 2 SHDN 3 MAX1240 MAX1241 REF 4 8 SCLK 7 CS 6 DOUT 5 GND AIN REF PDIP/SO 7 8 3 2 4 INT CLOCK CONTROL LOGIC T/H OUTPUT SHIFT REGISTER 6 DOUT 12-BIT SAR 2.5V REFERENCE (MAX1240 ONLY) MAX1240 MAX1241 5 GND SPI and QSPI are trademarks of Motorola, Inc. MICROWIRE is a trademark of National Semiconductor Corp. ________________________________________________________________ Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. MAX1240/MAX1241 __________________General Description MAX1240/MAX1241 +2.7V, Low-Power, 12-Bit Serial ADCs in 8-Pin SO ABSOLUTE MAXIMUM RATINGS VDD to GND .............................................................-0.3V to +6V AIN to GND................................................-0.3V to (VDD + 0.3V) REF to GND ...............................................-0.3V to (VDD + 0.3V) Digital Inputs to GND...............................................-0.3V to +6V DOUT to GND............................................-0.3V to (VDD + 0.3V) DOUT Current ..................................................................25mA Continuous Power Dissipation (TA = +70C) Plastic DIP (derate 9.09mW/C above +70C) ...........727mW SO (derate 5.88mW/C above +70C)........................471mW CERDIP (derate 8.00mW/C above +70C)................640mW Operating Temperature Ranges MAX1240_C_A/MAX1241_C_A .........................0C to +70C MAX1240_E_ A/MAX1241_E_ A .....................-40C to +85C MAX1240_MJA/MAX1241_MJA ...................-55C to +125C Storage Temperature Range............................-60C to +150C Lead Temperature (soldering, 10s) ................................+300C Soldering Temperature (reflow) PDIP, SO .....................................................................+260C CDIP ...........................................................................+250C Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (VDD = +2.7V to +3.6V (MAX1240); VDD = +2.7V to +5.25V (MAX1241); 73ksps, fSCLK = 2.1MHz (50% duty cycle); MAX1240--4.7F capacitor at REF pin, MAX1241--external reference; VREF = 2.500V applied to REF pin; TA = TMIN to TMAX; unless otherwise noted.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS DC ACCURACY (Note 1) Resolution 12 Relative Accuracy (Note 2) INL Differential Nonlinearity DNL Bits MAX124_A 0.5 MAX124_B/C 1.0 No missing codes over temperature 1 MAX124_A 0.5 3.0 MAX124_B/C 0.5 4.0 Gain Error (Note 3) 0.5 4.0 Gain Temperature Coefficient 0.25 Offset Error LSB LSB LSB LSB ppm/C DYNAMIC SPECIFICATIONS (10kHz sine-wave input, 0V to 2.500Vp-p, 73ksps, fSCLK = 2.1MHz) Signal-to-Noise Plus Distortion Ratio SINAD Total Harmonic Distortion THD Spurious-Free Dynamic Range SFDR Small-Signal Bandwidth MAX124_A/B 70 MAX124_C Up to the 5th harmonic MAX124_A/B dB 71.5 MAX124_A/B -80 MAX124_C -88 80 dB dB MAX124_C 88 -3dB rolloff 2.25 MHz 1.0 MHz Full-Power Bandwidth CONVERSION RATE Conversion Time tCONV Track/Hold Acquisition Time tACQ Throughput Rate Aperture Delay 5.5 7.5 fSCLK = 2.1MHz tAPR Figure 8 Aperture Jitter s 1.5 s 73 ksps 30 ns <50 ps ANALOG INPUT Input Voltage Range Input Capacitance 2 0 VREF 16 _______________________________________________________________________________________ V pF +2.7V, Low-Power, 12-Bit Serial ADCs in 8-Pin SO (VDD = +2.7V to +3.6V (MAX1240); VDD = +2.7V to +5.25V (MAX1241); 73ksps, fSCLK = 2.1MHz (50% duty cycle); MAX1240--4.7F capacitor at REF pin, MAX1241--external reference; VREF = 2.500V applied to REF pin; TA = TMIN to TMAX; unless otherwise noted.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS 2.480 2.500 2.520 V 30 mA MAX1240AC/BC 30 50 MAX1240AE/BE 30 60 MAX1240AM/BM 30 80 MAX1240C 30 INTERNAL REFERENCE (MAX1240 only) REF Output Voltage TA = +25C REF Short-Circuit Current REF Temperature Coefficient Load Regulation (Note 4) 0mA to 0.2mA output load Capacitive Bypass at REF ppm/C ppm/C 0.35 4.7 F EXTERNAL REFERENCE (VREF = 2.500V) VDD + 50mV 1.00 Input Voltage Range Input Current 100 Input Resistance 18 VSHDN = 0V REF Input Current in Shutdown Capacitive Bypass at REF 150 25 0.01 V A k 10 0.1 A F DIGITAL INPUTS: SCLK, CS, SHDN SCLK, CS Input High Voltage SCLK, CS Input Low Voltage SCLK, CS Input Hysteresis VIH VDD 3.6V 2.0 VDD > 3.6V (MAX1241) 3.0 V VIL VHYST SCLK, CS Input Leakage IIN VIN = 0V or VDD SCLK, CS Input Capacitance CIN (Note 5) SHDN Input High Voltage VSH SHDN Input Low Voltage VSL SHDN Input Current 0.01 VSM SHDN Voltage, Unconnected VFLT SHDN Max Allowed Leakage, Mid Input V 1 A 15 pF V VDD - 0.4 V VSHDN = 0V or VDD SHDN Input Mid Voltage 0.8 0.2 1.1 SHDN = unconnected 0.4 V 4.0 A VDD - 1.1 V VDD/2 SHDN = unconnected V 100 nA DIGITAL OUTPUT: DOUT Output Voltage Low VOL Output Voltage High VOH Three-State Leakage Current Three-State Output Capacitance IL COUT ISINK = 5mA 0.4 ISINK = 16mA 0.8 ISOURCE = 0.5mA CS = VDD CS = VDD (Note 5) VDD - 0.5 V V 0.01 10 A 15 pF _______________________________________________________________________________________ 3 MAX1240/MAX1241 ELECTRICAL CHARACTERISTICS (continued) MAX1240/MAX1241 +2.7V, Low-Power, 12-Bit Serial ADCs in 8-Pin SO ELECTRICAL CHARACTERISTICS (continued) (VDD = +2.7V to +3.6V (MAX1240); VDD = +2.7V to +5.25V (MAX1241); 73ksps, fSCLK = 2.1MHz (50% duty cycle); MAX1240--4.7F capacitor at REF pin, MAX1241--external reference; VREF = 2.500V applied to REF pin; TA = TMIN to TMAX; unless otherwise noted.) PARAMETERS SYMBOL CONDITIONS MIN TYP MAX UNITS POWER REQUIREMENTS Supply Voltage VDD MAX1240 2.7 3.6 MAX1241 2.7 5.25 MAX1240A/B MAX1240C Operating mode Supply Current MAX1241A/B IDD MAX1241C Power-down, digital inputs at 0V or VDD Supply Rejection PSR VDD = 3.6V VDD = 3.6V 1.4 2.0 1.4 3.5 VDD = 3.6V 0.9 1.5 VDD = 5.25V 1.6 2.5 VDD = 3.6V 0.9 2.8 VDD = 5.25V 1.6 3.8 VDD = 3.6V 1.9 10 VDD = 5.25V 3.5 15 (Note 5) 0.3 V mA A mV TIMING CHARACTERISTICS (Figure 8) (VDD = +2.7V to +3.6V (MAX1240); VDD = +2.7V to +5.25V (MAX1241); TA = TMIN to TMAX, unless otherwise noted.) PARAMETERS Acquisition Time SYMBOL tACQ CONDITIONS CS = VDD (Note 6) MIN TYP MAX 1.5 UNITS s MAX124_ _C/E 20 200 MAX124_ _M 20 240 SCLK Fall to Output Data Valid tDO Figure 1, CLOAD = 50pF CS Fall to Output Enable tDV Figure 1, CLOAD = 50pF 240 ns CS Rise to Output Disable tTR Figure 2, CLOAD = 50pF 240 ns 2.1 MHz ns SCLK Clock Frequency fSCLK 0 SCLK Pulse Width High tCH 200 ns SCLK Pulse Width Low tCL 200 ns SCLK Low to CS Fall Setup Time tCS0 50 ns DOUT Rise to SCLK Rise (Note 5) tSTR 0 ns CS Pulse Width tCS 240 ns Note 1: Tested at VDD = +2.7V. Note 2: Relative accuracy is the deviation of the analog value at any code from its theoretical value after the full-scale range and offset have been calibrated. Note 3: MAX1240--internal reference, offset nulled; MAX1241--external reference (VREF = +2.500V), offset nulled. Note 4: External load should not change during conversion for specified accuracy. Note 5: Guaranteed by design. Not subject to production testing. Note 6: Measured as [VFS(2.7V) - VFS(VDD(MAX)]. Note 7: To guarantee acquisition time, tACQ is the maximum time the device takes to acquire the signal, and is also the minimum time needed for the signal to be acquired. 4 _______________________________________________________________________________________ +2.7V, Low-Power, 12-Bit Serial ADCs in 8-Pin SO MAX1240/MAX1241 +2.7V 6k DOUT DOUT 6k CLOAD = 50pF CLOAD = 50pF DGND DGND a) High-Z to VOH and VOL to VOH b) High-Z to VOL and VOH to VOL Figure 1. Load Circuits for DOUT Enable Time +2.7V 6k DOUT DOUT 6k CLOAD = 50pF CLOAD = 50pF DGND DGND a) VOH to High-Z b) VOLto High-Z Figure 2. Load Circuits for DOUT Disable Time __________________________________________Typical Operating Characteristics (VDD = 3.0V, VREF = 2.5V, fSCLK = 2.1MHz, CL = 20pF, TA = +25C, unless otherwise noted.) OPERATING SUPPLY CURRENT vs. SUPPLY VOLTAGE 1.2 1.0 MAX1241 0.8 0.6 0.4 1.0 MAX1241 0.8 2 3 4 SUPPLY VOLTAGE (V) 5 6 0.7 0.6 0.5 0.4 0.3 0.2 0.9 0 MAX1241-03 0.8 1.1 0.2 0.9 OFFSET ERROR (LSB) SUPPLY CURRENT (mA) MAX1240 1.4 MAX1240 1.2 1.0 MAX1241-A/NEW RL = CODE = 101010100000 1.6 1.3 MAX1241-D OPERATING SUPPLY CURRENT (mA) 2.0 1.8 OFFSET ERROR vs. SUPPLY VOLTAGE SUPPLY CURRENT vs. TEMPERATURE RLOAD = CODE = 10101010000 -60 -20 20 0.1 0 60 TEMPERATURE (C) 100 140 2.25 2.75 3.25 3.75 4.25 4.75 5.25 SUPPLY VOLTAGE (V) _______________________________________________________________________________________ 5 ____________________________Typical Operating Characteristics (continued) (VDD = 3.0V, VREF = 2.5V, fSCLK = 2.1MHz, CL = 20pF, TA = +25C, unless otherwise noted.) SHUTDOWN SUPPLY CURRENT vs. TEMPERATURE 2.0 1.5 1.0 0.5 4.0 3.5 3.0 2.5 2.0 1.5 3.25 3.75 4.25 4.75 -20 20 60 100 TEMPERATURE (C) GAIN ERROR vs. SUPPLY VOLTAGE GAIN ERROR vs. TEMPERATURE -55 140 -30 -5 20 45 70 95 120 145 MAX1240 INTERNAL REFERENCE VOLTAGE vs. SUPPLY VOLTAGE 2.5020 MAX1241-08 0.8 MAX1241-07 0.7 0.3 TEMPERATURE (C) SUPPLY VOLTAGE (V) 0.8 0.4 0 -60 5.25 0.5 0.1 0 2.75 0.6 0.2 1.0 0.5 0 2.25 VDD = 2.7V 0.7 2.5015 0.6 0.5 0.4 0.3 2.5010 0.5 VREF (V) GAIN ERROR (LSB) 0.6 GAIN ERROR (LSB) VDD = 2.7V 0.7 MAX1241-0X 2.5 4.5 OFFSET ERROR (LSB) 3.0 OFFSET ERROR vs. TEMPERATURE 0.8 MAX1241-B 3.5 5.0 SHUTDOWN SUPPLY CURRENT (A) MAX1241-C/NEW SHUTDOWN SUPPLY CURRENT (A) 4.0 MAX1241-06 SHUTDOWN SUPPLY CURRENT vs. SUPPLY VOLTAGE 0.4 0.3 0.2 0.2 0.1 0.1 2.5005 2.5000 2.4995 2.75 3.25 3.75 4.25 4.75 -55 5.25 -30 -5 20 45 70 95 120 145 2.75 3.25 3.75 4.25 4.75 SUPPLY VOLTAGE (V) TEMPERATURE (C) VDD (V) MAX1240 INTERNAL REFERENCE VOLTAGE vs. TEMPERATURE INTEGRAL NONLINEARITY vs. SUPPLY VOLTAGE INTEGRAL NONLINEARITY vs. TEMPERATURE 1.0 VDD = 3.6V 2.499 VDD = 2.7V 1.0 0.8 INL (LSB) VDD = 2.7V 2.498 2.497 0.8 INL (LSB) 2.500 1.2 0.6 MAX1240 0.4 2.496 5.25 MAX1241-10/NEW 1.2 MAX1241-0Y 2.501 MAX1241-09/NEW 2.25 0.6 0.4 MAX1240 0.2 2.495 0.2 MAX1241 MAX1241 0 2.494 -60 -20 20 60 TEMPERATURE (C) 6 2.4990 2.25 0 0 VREF (V) MAX1240/MAX1241 +2.7V, Low-Power, 12-Bit Serial ADCs in 8-Pin SO 100 140 2.25 2.75 3.25 3.75 4.25 SUPPLY VOLTAGE (V) 4.75 5.25 0 -60 -40 -20 0 20 40 60 80 100 120 140 TEMPERATURE (C) _______________________________________________________________________________________ +2.7V, Low-Power, 12-Bit Serial ADCs in 8-Pin SO INTEGRAL NONLINEARITY vs. CODE FFT PLOT 0.4 MAX1241-TOC12A 20 MAX1241-11A/NEW 0.6 fAIN = 10kHz, 2.5VP-P fSAMPLE = 73ksps 0 -20 AMPLITUDE (dB) INL (LSB) 0.2 0 -0.2 -40 -60 -80 -100 -0.4 -120 -140 -0.6 0 1024 2048 CODE 3072 4096 0 18.75 37.50 FREQUENCY (kHz) _______________________________________________________________________Pin Description PIN NAME FUNCTION 1 VDD Positive Supply Voltage: 2.7V to 3.6V, (MAX1240); 2.7V to 5.25V (MAX1241) 2 AIN Sampling Analog Input, 0V to VREF range 3 SHDN Three-Level Shutdown Input. Pulling SHDN low shuts the MAX1240/MAX1241 down to 15A (max) supply current. Both the MAX1240 and MAX1241 are fully operational with either SHDN high or unconnected. For the MAX1240, pulling SHDN high enables the internal reference, and letting SHDN open disables the internal reference and allows for the use of an external reference. 4 REF Reference Voltage for Analog-to-Digital Conversion. Internal 2.5V reference output for MAX1240; bypass with 4.7F capacitor. External reference voltage input for MAX1241, or for MAX1240 with the internal reference disabled. Bypass REF with a minimum of 0.1F when using an external reference. 5 GND Analog and Digital Ground 6 DOUT Serial Data Output. Data changes state at SCLK's falling edge. DOUT is high impedance when CS is high. 7 CS 8 SCLK Active-Low Chip Select initiates conversions on the falling edge. When CS is high, DOUT is high impedance. Serial Clock Input. SCLK clocks data out at rates up to 2.1MHz. _______________________________________________________________________________________ 7 MAX1240/MAX1241 ____________________________Typical Operating Characteristics (continued) (VDD = 3.0V, REF = 2.5V, fSCLK = 2.1MHz, CL = 20pF, TA = +25C, unless otherwise noted.) MAX1240/MAX1241 +2.7V, Low-Power, 12-Bit Serial ADCs in 8-Pin SO +2.7V to +3.6V* * VDD,MAX = +5.25V (MAX1241) ** 4.7F (MAX1240) 0.1F (MAX1241) 4.7F 0.1F 1 ANALOG INPUT 0V TO VREF 2 SHUTDOWN INPUT 3 REFERENCE INPUT (MAX1241 ONLY) 4 VDD SCLK AIN MAX1240 CS MAX1241 SHDN REF DOUT GND 8 7 AIN SERIAL INTERFACE COMPARATOR TRACK INPUT CHOLD HOLD ZERO - + 16pF CSWITCH 6 9k RIN HOLD TRACK 5 C** AT THE SAMPLING INSTANT, THE INPUT SWITCHES FROM AIN TO GND. GND Figure 4. Equivalent Input Circuit Figure 3. Operational Diagram _______________Detailed Description Converter Operation The MAX1240/MAX1241 use an input track/hold (T/H) and successive-approximation register (SAR) circuitry to convert an analog input signal to a digital 12-bit output. No external-hold capacitor is needed for the T/H. Figure 3 shows the MAX1240/MAX1241 in its simplest configuration. The MAX1240/MAX1241 convert input signals in the 0V to VREF range in 9s, including T/H acquisition time. The MAX1240's internal reference is trimmed to 2.5V, while the MAX1241 requires an external reference. Both devices accept voltages from 1.0V to VDD. The serial interface requires only three digital lines (SCLK, CS, and DOUT) and provides an easy interface to microprocessors (Ps). The MAX1240/MAX1241 have two modes: normal and shutdown. Pulling SHDN low shuts the device down and reduces supply current below 10A (VDD 3.6V), while pulling SHDN high or leaving it open puts the device into operational mode. Pulling CS low initiates a conversion. The conversion result is available at DOUT in unipolar serial format. The serial data stream consists of a high bit, signaling the end of conversion (EOC), followed by the data bits (MSB first). Analog Input Figure 4 illustrates the sampling architecture of the analog-to-digital converter's (ADC's) comparator. The fullscale input voltage is set by the voltage at REF. Track/Hold In track mode, the analog signal is acquired and stored in the internal hold capacitor. In hold mode, the T/H switch opens and maintains a constant input to the ADC's SAR section. 8 12-BIT CAPACITIVE DAC REF During acquisition, the analog input (AIN) charges capacitor CHOLD. Bringing CS low ends the acquisition interval. At this instant, the T/H switches the input side of CHOLD to GND. The retained charge on CHOLD represents a sample of the input, unbalancing node ZERO at the comparator's input. In hold mode, the capacitive digital-to-analog converter (DAC) adjusts during the remainder of the conversion cycle to restore node ZERO to 0V within the limits of 12bit resolution. This action is equivalent to transferring a charge from CHOLD to the binary-weighted capacitive DAC, which in turn forms a digital representation of the analog input signal. At the conversion's end, the input side of C HOLD switches back to AIN, and C HOLD charges to the input signal again. The time required for the T/H to acquire an input signal is a function of how quickly its input capacitance is charged. If the input signal's source impedance is high, the acquisition time lengthens and more time must be allowed between conversions. The acquisition time (tACQ) is the maximum time the device takes to acquire the signal, and is also the minimum time needed for the signal to be acquired. Acquisition time is calculated by: tACQ = 9(RS + RIN) x 16pF where RIN = 9k, RS = the input signal's source impedance, and tACQ is never less than 1.5s. Source impedances below 1k do not significantly affect the ADC's AC performance. Higher source impedances can be used if a 0.01F capacitor is connected to the analog input. Note that the input capacitor forms an RC filter with the input source impedance, limiting the ADC's input signal bandwidth. _______________________________________________________________________________________ +2.7V, Low-Power, 12-Bit Serial ADCs in 8-Pin SO Analog Input Protection Internal protection diodes, which clamp the analog input to VDD and GND, allow the input to swing from GND - 0.3V to VDD + 0.3V without damage. However, for accurate conversions near full scale, the input must not exceed VDD by more than 50mV, or be lower than GND by 50mV. If the analog input exceeds 50mV beyond the supplies, limit the input current to 2mA. Internal Reference (MAX1240) The MAX1240 has an on-chip voltage reference trimmed to 2.5V. The internal reference output is connected to REF and also drives the internal capacitive DAC. The output can be used as a reference voltage source for other components and can source up to 400A. Bypass REF with a 4.7F capacitor. Larger capacitors increase wake-up time when exiting shutdown (see the section Using SHDN to Reduce Supply Current). The internal reference is enabled by pulling the SHDN pin high. Letting SHDN open disables the internal reference, which allows the use of an external reference, as described in the External Reference section. External Reference The MAX1240/MAX1241 operate with an external reference at the REF pin. To use the MAX1240 with an external reference, disable the internal reference by letting SHDN open. Stay within the +1.0V to VDD voltage range to achieve specified accuracy. The minimum input impedance is 18k for DC currents. During conversion, the external reference must be able to deliver up to 250A of DC load current and have an output impedance of 10 or less. The recommended minimum value for the bypass capacitor is 0.1F. If the reference has higher output impedance or is noisy, bypass it close to the REF pin with a 4.7F capacitor. ____________________Serial Interface Initialization after Power-Up and Starting a Conversion When power is first applied, and if SHDN is not pulled low, it takes the fully discharged 4.7F reference bypass capacitor up to 20ms to provide adequate charge for specified accuracy. With an external reference, the internal reset time is 10s after the power supplies have stabilized. No conversions should be performed during these times. To start a conversion, pull CS low. At CS's falling edge, the T/H enters its hold mode and a conversion is initiated. After an internally timed conversion period, the end of conversion is signaled by DOUT pulling high. Data can then be shifted out serially with the external clock. COMPLETE CONVERSION SEQUENCE CS tWAKE SHDN DOUT CONVERSION 0 POWERED UP CONVERSION 1 POWERED DOWN POWERED UP Figure 5. Shutdown Sequence _______________________________________________________________________________________ 9 MAX1240/MAX1241 Input Bandwidth The ADCs' input tracking circuitry has a 2.25MHz smallsignal bandwidth, so it is possible to digitize highspeed transient events and measure periodic signals with bandwidths exceeding the ADC's sampling rate by using undersampling techniques. To avoid aliasing of unwanted high-frequency signals into the frequency band of interest, anti-alias filtering is recommended. Using SHDN to Reduce Supply Current VDD = VREF = 3.0V RLOAD = , CLOAD = 50pF CODE = 010101010000 1 SUPPLY CURRNET (mA) MAX1241 FIG. 06a 10 Power consumption can be reduced significantly by shutting down the MAX1240/MAX1241 between conversions. Figure 6 shows a plot of average supply current versus conversion rate. Because the MAX1241 uses an external reference voltage (assumed to be present continuously), it "wakes up" from shutdown more quickly (in 4s) and therefore provides lower average supply currents. The wake-up time (tWAKE) is the time from when SHDN is deasserted to the time when a conversion may be initiated (Figure 5). For the MAX1240, this time depends on the time in shutdown (Figure 7) because the external 4.7F reference bypass capacitor loses charge slowly during shutdown. 0.1 MAX1240 0.01 MAX1241 0.001 0.1 1 10 100 1k 10k 100k CONVERSION RATE (Hz) External Clock Figure 6. Average Supply Current vs. Conversion Rate The actual conversion does not require the external clock. This allows the conversion result to be read back at the P's convenience at any clock rate from up to 2.1MHz. The clock duty cycle is unrestricted if each clock phase is at least 200ns. Do not run the clock while a conversion is in progress. MAX1240/41-07a 1.0 0.8 POWER-UP DELAY (ms) MAX1240/MAX1241 +2.7V, Low-Power, 12-Bit Serial ADCs in 8-Pin SO Timing and Control Conversion-start and data-read operations are controlled by the CS and SCLK digital inputs. The timing diagrams of Figures 8 and 9 outline serial-interface operation. A CS falling edge initiates a conversion sequence: the T/H stage holds the input voltage, the ADC begins to convert, and DOUT changes from high impedance to logic low. SCLK must be kept low during the conversion. An internal register stores the data when the conversion is in progress. 0.6 0.4 0.2 0.0 0.001 0.01 0.1 1 10 TIME IN SHUTDOWN (sec) Figure 7. Typical Reference Power-Up Delay vs. Time in Shutdown CS 1 4 8 12 16 SCLK DOUT B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0 EOC INTERFACE IDLE CONVERSION IN PROGRESS TRACK/HOLD TRACK STATE HOLD 7.5s (tCONV) CYCLE TIME EOC CLOCK OUT SERIAL DATA TRAILING ZEROS IDLE TRACK 0s 12.5 x 0.476s = 5.95s HOLD 0s 0.24s TOTAL = 13.7s Figure 8. Interface Timing Sequence 10 ______________________________________________________________________________________ (tCS) +2.7V, Low-Power, 12-Bit Serial ADCs in 8-Pin SO ... tCS0 SCLK tDO tCONV tDV ... DOUT tAPR INTERNAL T/H tCH ... tCL B2 tTR B1 B0 tSTR (TRACK/ACQUIRE) ... (HOLD) (TRACK/ACQUIRE) Figure 9. Detailed Serial-Interface Timing End of conversion (EOC) is signaled by DOUT going high. DOUT's rising edge can be used as a framing signal. SCLK shifts the data out of this register any time after the conversion is complete. DOUT transitions on SCLK's falling edge. The next falling clock edge produces the MSB of the conversion at DOUT, followed by the remaining bits. Since there are 12 data bits and one leading high bit, at least 13 falling clock edges are needed to shift out these bits. Extra clock pulses occurring after the conversion result has been clocked out, and prior to a rising edge of CS, produce trailing zeros at DOUT and have no effect on converter operation. Minimum cycle time is accomplished by using DOUT's rising edge as the EOC signal. Clock out the data with 12.5 clock cycles at full speed. Pull CS high after reading OUTPUT CODE 11...111 FULL-SCALE TRANSITION 11...110 11...101 FS = VREF - 1 LSB 1 LSB = VREF 4096 00...011 00...010 00...001 00...000 0 1 2 3 INPUT VOLTAGE (LSBs) FS FS - 3/2 LSB Figure 10. Unipolar Transfer Function, Full Scale (FS) = VREF 1 LSB, Zero Scale (ZS) = GND the conversion's LSB. After the specified minimum time (tCS), CS can be pulled low again to initiate the next conversion. Output Coding and Transfer Function The data output from the MAX1240/MAX1241 is binary, and Figure 10 depicts the nominal transfer function. Code transitions occur halfway between successiveinteger LSB values. If VREF = +2.500V, then 1 LSB = 610V or 2.500V/4096. ____________Applications Information Connection to Standard Interfaces The MAX1240/MAX1241 serial interface is fully compatible with SPI/QSPI and MICROWIRE standard serial interfaces (Figure 11). If a serial interface is available, set the CPU's serial interface in master mode so the CPU generates the serial clock. Choose a clock frequency up to 2.1MHz. 1) Use a general-purpose I/O line on the CPU to pull CS low. Keep SCLK low. 2) Wait the for the maximum conversion time specified before activating SCLK. Alternatively, look for a DOUT rising edge to determine the end of conversion. 3) Activate SCLK for a minimum of 13 clock cycles. The first falling clock edge produces the MSB of the DOUT conversion. DOUT output data transitions on SCLK's falling edge and is available in MSB-first format. Observe the SCLK to DOUT valid timing characteristic. Data can be clocked into the P on SCLK's rising edge. 4) Pull CS high at or after the 13th falling clock edge. If CS remains low, trailing zeros are clocked out after the LSB. ______________________________________________________________________________________ 11 MAX1240/MAX1241 tCS CS MAX1240/MAX1241 +2.7V, Low-Power, 12-Bit Serial ADCs in 8-Pin SO 5) With CS = high, wait the minimum specified time, tCS, before initiating a new conversion by pulling CS low. If a conversion is aborted by pulling CS high before the conversion's end, wait for the minimum acquisition time, tACQ, before starting a new conversion. CS must be held low until all data bits are clocked out. Data can be output in two bytes or continuously, as shown in Figure 8. The bytes contain the result of the conversion padded with one leading 1, and trailing 0s. I/O CS SCK SCLK MISO DOUT +3V MAX1240 MAX1241 SS a) SPI SPI and MICROWIRE When using SPI or MICROWIRE, set CPOL = 0 and CPHA = 0. Conversion begins with a CS falling edge. DOUT goes low, indicating a conversion in progress. Wait until DOUT goes high or until the maximum specified 7.5s conversion time elapses. Two consecutive 1-byte reads are required to get the full 12 bits from the ADC. DOUT output data transitions on SCLK's falling edge and is clocked into the P on SCLK's rising edge. The first byte contains a leading 1, and seven bits of conversion result. The second byte contains the remaining five bits and three trailing zeros. See Figure 11 for connections and Figure 12 for timing. CS Layout, Grounding, and Bypassing For best performance, use printed circuit boards. Wirewrap boards are not recommended. Board layout should ensure that digital and analog signal lines are separated from each other. Do not run analog and digital (especially clock) lines parallel to one another, or digital lines underneath the ADC package. Figure 14 shows the recommended system ground connections. Establish a single-point analog ground ("star" ground point) at GND, separate from the logic ground. Connect all other analog grounds and DGND to this star ground point for further noise reduction. No other digital 12 SCLK MISO DOUT +3V MAX1240 MAX1241 SS b) QSPI QSPI Set CPOL = CPHA = 0. Unlike SPI, which requires two 1-byte reads to acquire the 12 bits of data from the ADC, QSPI allows the minimum number of clock cycles necessary to clock in the data. The MAX1240/MAX1241 requires 13 clock cycles from the P to clock out the 12 bits of data with no trailing zeros (Figure 13). The maximum clock frequency to ensure compatibility with QSPI is 2.097MHz. CS SCK I/O CS SK SCLK SI DOUT MAX1240 MAX1241 c) MICROWIRE Figure 11. Common Serial-Interface Connections to the MAX1241 system ground should be connected to this single-point analog ground. The ground return to the power supply for this ground should be low impedance and as short as possible for noise-free operation. High-frequency noise in the VDD power supply may affect the ADC's high-speed comparator. Bypass this supply to the single-point analog ground with 0.1F and 4.7F bypass capacitors. Minimize capacitor lead lengths for best supply-noise rejection. If the power supply is very noisy, a 10 resistor can be connected as a lowpass filter to attenuate supply noise (Figure 14). ______________________________________________________________________________________ +2.7V, Low-Power, 12-Bit Serial ADCs in 8-Pin SO MAX1240/MAX1241 1ST BYTE READ 2ND BYTE READ SCLK CS tCONV D11 DOUT* D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 MSB HIGH-Z D0 LSB EOC *WHEN CS IS HIGH, DOUT = HIGH -Z Figure 12. SPI/MICROWIRE Serial Interface Timing (CPOL = CPHA = 0) SCLK CS tCONV D11 MSB DOUT* D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 LSB HIGH-Z EOC *WHEN CS IS HIGH, DOUT = HIGH -Z Figure 13. QSPI Serial Interface Timing (CPOL = CPHA = 0) SUPPLIES +3V +3V GND +3V DGND R* = 10 4.7F 0.1F VDD GND MAX1240 MAX1241 DIGITAL CIRCUITRY *OPTIONAL Figure 14. Power-Supply Grounding Condition ______________________________________________________________________________________ 13 MAX1240/MAX1241 +2.7V, Low-Power, 12-Bit Serial ADCs in 8-Pin SO __Ordering Information (continued) PART TEMP RANGE PINPACKAGE INL (LSB) MAX1240AEPA+ -40C to +85C 8 PDIP 1/2 1 MAX1240BEPA+ -40C to +85C 8 PDIP MAX1240CEPA+ -40C to +85C 8 PDIP 1 MAX1240AESA+ -40C to +85C 8 SO 1/2 MAX1240BESA+ -40C to +85C 8 SO 1 MAX1240CESA+ -40C to +85C 8 SO 1 MAX1240AMJA+ -55C to +125C 8 CERDIP 1/2 MAX1240BMJA+ -55C to +125C 8 CERDIP 1 MAX1240CMJA+ -55C to +125C CERDIP 1 MAX1241ACPA+ 0C to +70C 8 8 PDIP MAX1241BCPA+ 0C to +70C 8 PDIP MAX1241CCPA+ 0C to +70C 8 PDIP 1 MAX1241ACSA+ 0C to +70C 8 SO 1/2 MAX1241BCSA + 0C to +70C 8 SO 1 MAX1241CCSA+ 0C to +70C 8 SO 1 MAX1241BC/D 0C to +70C Dice* 1 MAX1241AEPA+ -40C to +85C 8 PDIP 1/2 1/2 1 MAX1241BEPA+ -40C to +85C 8 PDIP 1 MAX1241CEPA+ -40C to +85C 8 PDIP 1 MAX1241AESA+ -40C to +85C 8 SO 1/2 MAX1241BESA+ -40C to +85C 8 SO 1 MAX1241CESA+ -40C to +85C 8 SO 1 MAX1241AMJA+ -55C to +125C 8 CERDIP 1/2 MAX1241BMJA+ -55C to +125C 8 CERDIP 1 MAX1241CMJA+ -55C to +125C CERDIP Chip Information PROCESS: BiCMOS SUBSTRATE CONNECTED TO GND Package Information For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a "+", "#", or "-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. PACKAGE TYPE PACKAGE CODE OUTLINE NO. LAND PATTERN NO. 8 PDIP P8+2 21-0043 -- 8 SO S8+5 21-0041 90-0096 8 CERDIP J8+2 21-0045 -- 1 8 +Denotes lead(Pb)-free/RoHS-compliant package. *Dice are specified at TA = +25C, DC parameters only. Contact factory for availability and processing to MIL-STD-883. 14 ______________________________________________________________________________________ 2.7V, Low-Power, 12-Bit Serial ADCs in 8-Pin SO REVISION NUMBER REVISION DATE 3 3/10 4 6/10 Future product note removed from one part in the Ordering Information 1 5 8/10 Removed MAX1240BC/D and add MAX1240CC/D 1 DESCRIPTION Added automotive grade to data sheet PAGES CHANGED 1, 2, 3, 7, 9, 14, 15, 16 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 15 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2010 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc. MAX1240/MAX1241 Revision History