7.0 mm x 5.0 mm VCXO V85G series
www.bliley.com 2545 West Grandview Blvd Erie, PA. 16506 Tel (814) 838-3571
Page 1 of 4 Rev 1.2 A
Description:
The V85G Voltage-controlled
Crystal Oscillator (VCXO) Series
products provide a wide range of
options in temperature stability,
operating frequency range, and ultra
low phase jitter in a 7.0 x 5.0 mm
ceramic package with PECL or
LVDS outputs..
Features:
• Available in frequencies from 1.5
to 200 MHz
• Tri-state Enable/Disable
• Hermetically sealed ceramic SMD
package
• PECL / LVDS outputs
• RoHS-6/Leadfree compliant
• Integrated jitter 0.3 pS max.
Frequency Range Operating Temperature Frequency Stability
Frequency Operating Temperature Product Code Freq. Stability Product Code
-10 to +60C A +/- 25 ppm A
0 to +70C B +/- 50 ppm B
-20 to 70C C
1.5 to 200.5 MHz
-40 to 85C D
Frequency stability is inclusive of calibration at 25C, operating temp. range, input voltage variation, load variation,
aging, shock, and vibration
Not all combinations of stability and temperature ranges available.
Aging:
(typical at 20MHz after 30 days continuous operation)
Frequency Timeframe
Aging Product Code
20 MHz 1st Year +/- 5.0ppm N/A
Supply Voltage (Vs):
Power Supply (Vs) 2.5 Vdc +/-10% 3.3 Vdc +/-10%
Product Code A B
Frequency versus Voltage:
3.3 volt 5.0 volt
0 to 3.3v
on Pin 1
Product Code
0.5v to 4.5v
on Pin1
Product Code
+/-100 ppm min N/A +/-100 ppm min
N/A
Current Consumption ( I
DD
):
I
DD
( at 2.5V )
I
DD
( at 3.3V )
PECL / LVDS PECL / LVDS
Frequency Range ( MHz ) mA mA
1.500 to 64.999 75 / 45 75 / 45
65.000 to 200.000 100 / 80 100 / 80
7.0 mm x 5.0 mm VCXO V85G series
www.bliley.com 2545 West Grandview Blvd Erie, PA. 16506 Tel (814) 838-3571
Page 2 of 4 Rev 1.2 A
Environmental:
Storage Temperature -55 to +125 °C
Output Waveform:
PECL PECL LVDS LVDS
Product Code A B
At 2.5 V At 3.3 V At 2.5 V At 3.3 V
Output Logic 1 1.475 Vmin 2.275Vmin 1.6Vmax
1.6Vmax
Output Logic 0 1.095 Vmax
1.680Vmax
0.9Vmin 0.9Vmin
Rise/Fall Time ( nS )
1 max 1 max 1 max 1 max
Tri-state function Pin 2:
Pin 2 = Ouput Active with 0.5 volts max on Pin 2
Pin2 = Output in high impedance state when 2.0 volts min. on Pin 2 or 2.5 volts min ( for 3.3v supply )
Ordering Options:
Product Family Operating
Temperature
Temperature
Stability
Supply
Voltage
Output
Type
Operating
Frequency
V85G A A A A XXX.XXXMHz
V85G B B B B XXX.XXXMHz
V85G C XXX.XXXMHz
V85G D XXX.XXXMHz
V85G A B B A 155.520MHz
Part Number Build Example
**Consult Bliley sales if other options required
RoHs compliant ; -20 to 70C; +/- 50ppm; a 3.3 volt supply;PECL outputs and 155.520 MHz nominal
operating frequency.
How to Order This Product:
Contact Bliley Technologies with Product Selection Code from Ordering Options Section above.
