2322 66. 5...3 Vishay BCcomponents 265 V PTC Thermistors For Overload Protection FEATURES * Wide range of trip and non-trip currents: from 11 mA up to 800 mA for the trip current * Wide range of resistance: from 2.1 up to 3 K * Small ratio between trip and non-trip currents (It/Int = 1.5 at 25 C) * High maximum inrush current * Excellent long term behaviour, also in humidity * Leaded parts withstand mechanical stresses and vibration * UL file E148885 according to XGPU standard UL1434 * UL approved PTCs are guaranteed to withstande severe test programmes * Long-life cycle tests (over 5000 trip cycles) * Long-life storage tests (3000 hours at 250C * Electrical cycle tests at low ambient temperatures (- 40C or 0C) * Damp-heat and water immersion tests * Overvoltage tests at up to 200% of rated voltage APPLICATIONS * Telecommunications * Automotive systems * Industrial electronics * Consumer electronics * Electronic data processing. DESCRIPTION These directly heated thermistors have a positive temperature coefficient and are primarily intended for overload protection. They consist of a naked disc with two tinned brass or copper clad steel leads and coated. Leadless disks and leaded disks without coating are available on request. MOUNTING QUICK REFERENCE DATA PARAMETER VALUE UNIT The PTC Thermistors are suitable for processing on automatic insertion equipment. Switch temperature 140 C Soldering < 240 C; duration < 5 s. Maximum voltage (RMS) 265 V Resistamnce to heat < 260 C; duration < 5 s. 0 to 70 C Temperature range Climatic category Document Number: 29087 Revision: 03-Aug-04 25/125/56 MARKING Only the grey lacquered thermistors with a diameter of 8.5 to 20.5 mm are marked with BC, R25 value (example 1R9) on one side and Int, Vmax on the other side. For technical questions contact: nlr.europe@vishay.com www.vishay.com 1 2322 66. 5...3 265 V PTC Thermistors For Overload Protection Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION for 2322 66. 5...3; max. voltage = 265 V (ac or dc)(1) Ires MAX. at Vmax and 25 C (mA) CATALOG NUMBERS Int MAX. at 25 C (mA) It MIN. at 25 C (mA) R25 20% ( ) 11 17 3000 80 6.5 7.3 5 2322 660 51193 2322 660 61193 15 23 1900 110 6.5 7.3 5 2322 660 51593 2322 660 61593 19 29 1200 140 6.5 7.3 5 2322 660 51993 2322 660 61993 28 42 500 200 6.8 7.3 5 2322 660 52893 2322 660 62893 39 59 260 300 6.8 7.3 5 2322 660 53993 2322 660 63993 63 95 120 450 7 7.3 5 2322 660 56393 2322 660 66393 76 115 85 550 7 7.3 5 2322 660 57693 2322 660 67693 I(2) MAX. at 25 C (mA) DISSIP. FACTOR (mW/K) D MAX. (mm) BULK TAPE ON REEL 95 143 56 600 7 7.3 5 2322 660 59593 2322 660 69593 110 165 48 650 7.5 8.3 7 2322 661 5113 2322 661 61113 140 210 29 800 8 8.3 7 2322 661 51413 2322 661 61413 170 255 22 900 9 9 8.5 2322 661 51713 2322 661 61713 190 285 18 1000 9.5 9 8.5 2322 661 51913 2322 661 61913 210 315 17 1300 10 10.5 10.5 2322 662 52113 2322 662 62113 250 375 12 1500 11 10.5 10.5 2322 662 52513 2322 662 62513 280 420 11 1800 12 11.7 12.5 2322 662 52813 2322 662 62813 320 480 8.4 2200 13 11.7 12.5 2322 662 53213 2322 662 63213 400 600 6.6 3000 15 15.5 16.5 2322 663 54013 - 490 735 4.4 3500 16 15.5 16.5 2322 663 54913 - 590 855 4 4500 19.5 19.8 20.5 2322 664 55913 - 700 1050 2.8 5500 21 19.8 20.5 2322 664 57013 - 800 1200 2.1 5500 22.5 19.8 20.5 2322 664 58013(3) - Notes 1. The thermistors are clamped at the seating plane. 2. Imax is the maximum overload current that may flow through the PTC when it passes from the low ohmic to the high ohmic state UL approval: Imax *0.75. 3. Not UL approved. ELECTRICAL CHARACTERISTICS IMAX AS A FUNCTION OF VOLTAGE. 250 % 200 It 150 I nt 100 I max 50 0 www.vishay.com 2 50 25 0 25 50 For technical questions contact: nlr.europe@vishay.com 75 T amb ( oC) 100 Document Number: 29087 Revision: 03-Aug-04 2322 66. 5...3 265 V PTC Thermistors For Overload Protection Vishay BCcomponents CURRENT DEVIATION AS A FUNCTION OF THE AMBIENT TEMPERATURE. 200 Imax (%) 150 100 80 0 40 50 70 100 120 150 Vrated (%) Imax as stated in the Electrical data and ordering information tables, is the maximum overload current that may flow through the PTC when passing from the low ohmic to high ohmic state at rated voltage. When other voltages are present after tripping, the Imax value can be derived from the above Imax as a function of voltage graph. Voltages below Vrated will allow higher overload currents to pass the PTC. COMPONENTS OUTLINE, PACKAGING AND CATALOG NUMBERS PACKAGING CODE NUMBER 2322 S.P.Q OUTLINE P.Q. 5...3 500 2000 6...3 3000 6000 Fig. 1c, 1d 5...3 250 2000 Fig. 1a, 1b 6...3 3000 6000 Fig. 1c, 1d 5...3 200 2000 Fig. 1a, 1b 62813 - 63213 1500 6000 Fig. 1e, 1f 6...3 3000 6000 Fig. 1c, 1d 663 5...3 100 800 Fig. 1a 664 5...3 50 400 Fig. 1a 660 661 662 Fig. 1a, 1b PTC THERMISTORS IN BULK T D D H3 H3 H2 H2 F L1 F L1 d d Leaded8-1.vsd Fig. 1a Document Number: 29087 Revision: 03-Aug-04 For technical questions contact: nlr.europe@vishay.com Fig. 1b Leaded8-2.vsd www.vishay.com 3 2322 66. 5...3 265 V PTC Thermistors For Overload Protection Vishay BCcomponents PTC THERMISTORS ON TAPE ON REEL T P D P T P D P h P h P h h H3 H4 H2 W2 L a W2 L a H4 d H2 d H3 W0 W1 W H0 H1 H0 H1 W0 W1 W P0 P0 P1 F P1 F D0 D0 T T t t Taped6.vsd Taped1.vsd Fig. 1c Fig. 1d P' T P' D P h P P P h h h H3 H4 d T D H2 H4 d H3 H2 W2 W2 L H0 H1 L W0 W1 W H0 H1 W0 W1 W P0 P1 F P0 D0 P1 F D0 T T t Fig. 1f Fig. 1e TAPE AND REEL ACCORDING TO IEC60286-2 dimensions in millimeters SYMBOL PARAMETER DIMENSIONS TOLERANCE < seating plane angle 15 5.0 D d D0 body diameter lead diameter feed hole diameter see table 0.6 4.0 max 10 % 0.2 F lead to lead distance 5.0 + 0.6 - 0.1 H0 H2 H3 H4 16.0 4.0 D+5 0 0.5 1.0 max. 0.2 h lead wire clinch height component bottom to seating plane component top to seating plane seating plane difference (left-right lead) component alignment 0 2.0 L1 lead length 20 min. T t total thinkness total tape thickness 5.5 0.9 max. max. www.vishay.com 4 For technical questions contact: nlr.europe@vishay.com REMARKS guaranteed between component and tape with cardboard tape 0.5 0.1 Document Number: 29087 Revision: 03-Aug-04 2322 66. 5...3 265 V PTC Thermistors For Overload Protection Vishay BCcomponents REEL SPECIFICATIONS in millimeters REEL DIMENSIONS in millimeters DIAMETER W1 W2 MAX. <12 42 1 56 12 46 1 60 3 18 30 +1 -0 77 85.6 356 max. 92 22.5 W1 W2 TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 .1193 TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 .1593 1,0E+08 1,0E+08 1,0E+07 1,0E+07 R [Ohm] R [Ohm] 1,0E+06 1,0E+06 1,0E+05 1,0E+05 1,0E+04 1,0E+04 1,0E+03 1,0E+03 25 50 75 100 125 150 TEMP. [C] Low voltage 175 200 1,0E+07 1,0E+06 1,0E+06 R [Ohm] 1,0E+07 1,0E+05 1,0E+04 1,0E+03 1,0E+03 75 100 125 150 175 200 225 1,0E+02 25 TEMP. [C] Low voltage Document Number: 29087 Revision: 03-Aug-04 175 200 225 375 Vpulsed 1,0E+05 1,0E+04 1,0E+02 100 125 150 TEMP. [C] TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 .2893 1,0E+08 50 75 Low voltage 1,0E+08 25 50 375 Vpulsed TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 .1993 R [Ohm] 1,0E+02 25 225 50 75 100 125 150 175 200 225 TEMP. [C] 375 Vpulsed For technical questions contact: nlr.europe@vishay.com Low voltage 375 Vpulsed www.vishay.com 5 2322 66. 5...3 265 V PTC Thermistors For Overload Protection Vishay BCcomponents TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 .3993 TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 .6393 1,0E+07 1,0E+08 1,0E+07 1,0E+06 R [Ohm] R [Ohm] 1,0E+06 1,0E+05 1,0E+05 1,0E+04 1,0E+04 1,0E+03 1,0E+03 1,0E+02 1,0E+02 25 50 75 100 125 150 TEMP. [C] Low voltage 175 200 25 50 225 75 100 125 150 TEMP. [C] Low voltage 375 Vpulsed TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 .7693 175 200 225 375 Vpulsed TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 .9593 1,0E+06 1,0E+07 1,0E+06 1,0E+05 1,0E+04 R [Ohm] R [Ohm] 1,0E+05 1,0E+04 1,0E+03 1,0E+03 1,0E+02 1,0E+02 1,0E+01 25 1,0E+01 25 50 75 100 125 150 175 200 225 50 75 Low voltage 100 125 Low voltage 375 Vpulsed TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 661 .1113 150 175 200 225 TEMP. [C] TEMP. [C] 375 Vpulsed TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 661 .1413 1,0E+07 1,0E+06 1,0E+06 R [Ohm] R [Ohm] 1,0E+05 1,0E+04 1,0E+05 1,0E+04 1,0E+03 1,0E+03 1,0E+02 1,0E+02 1,0E+01 1,0E+01 25 50 75 100 125 150 TEMP. [C] Low voltage www.vishay.com 6 175 200 225 25 375 Vpulsed For technical questions contact: nlr.europe@vishay.com 50 75 100 125 150 TEMP. [C] Low voltage 175 200 225 375 Vpulsed Document Number: 29087 Revision: 03-Aug-04 2322 66. 5...3 265 V PTC Thermistors For Overload Protection TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 661 .1913 1,0E+06 1,0E+06 1,0E+05 1,0E+05 1,0E+04 1,0E+04 R [Ohm] R [Ohm] TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 661 .1713 Vishay BCcomponents 1,0E+03 1,0E+03 1,0E+02 1,0E+02 1,0E+01 25 50 75 100 125 150 175 200 1,0E+01 25 225 50 75 100 Low voltage 125 150 175 200 225 TEMP. [C] TEMP. [C] Low voltage 375 Vpulsed TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 662 .2113 375 Vpulsed TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 662 .2513 1,0E+06 1,0E+06 1,0E+05 1,0E+05 R [Ohm] 1,0E+04 R [Ohm] 1,0E+04 1,0E+03 1,0E+03 1,0E+02 1,0E+01 1,0E+02 1,0E+00 1,0E+01 25 25 50 75 100 125 150 TEMP. [C] Low voltage 175 200 100 125 150 TEMP. [C] 1,0E+06 1,0E+06 1,0E+05 1,0E+05 1,0E+04 1,0E+04 1,0E+03 175 200 225 375 Vpulsed TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 662 .3213 R [Ohm] R [Ohm] 75 Low voltage 375 Vpulsed TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 662 .2813 1,0E+03 1,0E+02 1,0E+02 1,0E+01 1,0E+01 1,0E+00 25 50 225 1,0E+00 50 75 100 125 150 175 200 Low voltage Document Number: 29087 Revision: 03-Aug-04 225 25 50 75 100 125 150 175 200 225 TEMP. [C] TEMP. [C] 375 Vpulsed Low voltage 205 Vpulsed www.vishay.com 7 2322 66. 5...3 265 V PTC Thermistors For Overload Protection Vishay BCcomponents TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 663 .4013 TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 663 .4913 1,0E+06 1,0E+06 1,0E+05 1,0E+05 1,0E+04 R [Ohm] R [Ohm] 1,0E+04 1,0E+03 1,0E+03 1,0E+02 1,0E+02 1,0E+01 1,0E+01 1,0E+00 25 50 75 100 125 150 TEMP. [C] Low voltage 175 200 1,0E+00 25 225 75 100 125 150 TEMP. [C] Low voltage 175 200 225 375 Vpulsed TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 664 .7013 TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 664 .5913 1,0E+06 1,0E+06 1,0E+05 1,0E+05 1,0E+04 1,0E+04 R [Ohm] R [Ohm] 50 375 Vpulsed 1,0E+03 1,0E+03 1,0E+02 1,0E+02 1,0E+01 1,0E+01 1,0E+00 1,0E+00 25 50 75 100 125 150 175 200 25 225 Low voltage 50 75 100 125 150 175 200 225 TEMP. [C] TEMP. [C] Low voltage 375 Vpulsed 375 Vpulsed TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 664 .58013 1,0E+05 R [Ohm] 1,0E+04 1,0E+03 1,0E+02 1,0E+01 1,0E+00 25 50 75 100 125 150 175 200 TEMP. [C] www.vishay.com 8 For technical questions contact: nlr.europe@vishay.com Document Number: 29087 Revision: 03-Aug-04