Features
- The press-fit terminal block developed in
respond to the high density requirement for
electronic equipment, which is suitable for
supplying the power to each unit in an
equipment especially to printed circuit boards.
-Contacts are press-fitted.
-Hardly affected by heat, that is normally found
in a soldered type terminal block.
Specifications
-Rated current:18A max. for 6-positions one
24A max. for 10-positions one
-Contact material: Copper alloy
-Contact plating: Nickel undercoated, Solder
finish
-Applicable PCB thickness:
t=2.40.15mm or more
-Screw to fix: M4
-Insertion force
For 6-positions: 120kg or less
For 8-positons: 160kg or less
For 10-positions: 210kg or less
-Retention force
For 6-positions: 21kg or more
For 8-positions: 38kg or more
For 10-positions: 48kg or more
-Screw torque: 15kg/cm max.
POWER INSERT
6 POSITIONS
Mounting dimensions on the board
(Finished diameter)
(Screw clearance hole)
8 POSITIONS
10 POSITIONS
Mounting dimensions on the board
(Finished diameter)
(Screw clearance hole)
Mounting dimensions on the board
(Finished diameter)
(Screw clearance hole)
Ordering code
Applicable dimensions of through hall
Part number
No. of positions
(8, 10-positions)
(6-positions)
Pitch of coantacts
Code for plating
Nickel undercoat, Solder finish
No. of
POSITIONS
Dia. of hole for
contact (d) (mm)
Thickness of
solder (µm)
Finished dia.
(D) (mm)
Thickness
of copper
plating (µm)
0X90X7
