Thick Film Chip Resistors NRC Series FEATURES * EIA STANDARD SIZING 0201(1/20W), 0402(1/16W), 0603(1/10W), 0805(1/8W), m1206(1/4W), 1210(1/3W), 2010(3/4W) AND 2512(1W) * METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE ..(CERMET) PROVIDES UNIFORM QUALITY AND HIGH RELIABILITY * DOUBLE GLASS OVERCOAT ASSURES STRONG MECHANICAL ..CONTRUCTION AND LONG LIFE, NICKEL BARRIER PREVENTS LEACHING * BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE * ZERO OHM (JUMPER) CHIP IS AVAILABLE & TRIMMABLE TYPE AVAILABLE *4 Type EIA Size NRC02 0201 NRC04 0402 NRC06 0603 NRC10 0805 NRC12 1206 NRC25 1210 NRC50 2010 NRC100 2512 NRC02ZO NRC04ZO NRC06ZO NRC10ZO NRC12ZO NRC25ZO NRC50ZO NRC100ZO 0201 0402 0603 0805 1206 1210 2010 2512 Max.*1 Max.*2 Resistance Temperature Resistance Operating Resistance Working Overload Tolerance Coefficient Range Temperature Value Voltage Voltage (Code) (ppm/C) () Range (C) 1% (F) 250 10 ~ 1M E-24 1/20 (0.05) W 25V 50V 5% (J) E-24 -55 ~ +125 200 10 ~ 1M 10% (K) E-12 1% (F) 100 E-96 10 ~ 1M 1/16 (0.063) W 25V 50V 5% (J) 200 E-24 -55 ~ +125 5% (J) 350 1.0 ~ 9.1 & 1.1M ~ 10M *3 E-24 1% (F) 100 10 ~ 2.49M E-96 1/10 (0.10) W 50V 100V 5% (J) 200 10 ~ 1M E-24 -55 ~ +150 5% (J) 350 1.0 ~ 9.1 & 1.1M ~ 10M *3 E-24 1% (F) 100 10 ~ 2.49M E-96 1/8 (0.125) W 150V 300V 5% (J) 200 10 ~ 1M E-24 5% (J) 350 1.0 ~ 9.1 & 1.1M ~ 10M *3 E-24 1% (F) 100 E-96 10 ~ 1M 1/4 (0.250) W 200V 400V 5% (J) 200 E-24 5% (J) 350 1.0 ~ 9.1 & 1.1M ~ 10M *3 E-24 1% (F) 100 E-96 10 ~ 1M 1/3 (0.33) W 200V 400V 5% (J) 200 E-24 -55 ~ +175 5% (J) 350 1.0 ~ 9.1 & 1.1M ~ 10M *3 E-24 1% (F) 100 E-96 10 ~ 1M 3/4 (0.75) W 200V 400V 250 E-24 5% (J) 350 1.0 ~ 9.1 & 1.1M ~ 10M *3 E-24 1% (F) 100 E-96 10 ~ 1M 1W 250V 500V 250 5% (J) E-24 350 1.0 ~ 9.1 *3 Rated Current 0.5A (0.05 max. DC Resistance -55 ~ +125 Rated Current 1.0A (0.05 max. DC Resistance -55 ~ +150 Rated Current 1.0A (0.05 max. DC Resistance Rated Current 2.0A (0.05 max. DC Resistance Zero Ohm Jumper Rated Current 2.0A (0.05 max. DC Resistance -55 ~ +175 Rated Current 2.0A (0.05 max. DC Resistance Rated Current 2.0A (0.05 max. DC Resistance Rated Current 2.0A (0.05 max. DC Resistance Power Rating at 70C Note *1 - Maximum allowable continuous Working Voltage for all resistors is the lower of the two values: "Maximum Working Voltage" as specified above (or) Power Derating Curve: For operation above 70C, power rating must be derated according to the following chart: 100 Power rating (Watts) x Resistance (Ohms) Maximum Working Voltage (see Note *1 above). Note *3 - Made to order. Contact NIC for leadtime. Note *4 - Please contact NIC for availability of laser trimmable versions of 0805 and 1206 sizes parts. Note *5 - Please note, NIC's NRC series products are capable of meeting the following specifications: JIS-C 5202, EIAJ RC-2690, EIA575, EIA PDP-100, MIL-R-5542D and UL94V-0. (R) NIC COMPONENTS www.niccomp.com RATE (%) Note *2 - Maximum allowable Overload voltage is two times the 80 60 40 20 0 -20 20 60 100 125 140 180 150 175 C o 0805/1206/1210/2010/2512 0603 0402 www.lowESR.com www.RFpassives.com 197 Thick Film Chip Resistors NRC Series DIMENSIONS (mm) Type NRC02 NRC04 NRC06 NRC10 NRC12 NRC25 NRC50 NRC100 NRCO2ZO NRCO4ZO NRCO6ZO NRC10ZO NRC12ZO NRC25ZO NRC50ZO NRC100ZO Power Rating 1/20W 1/16W 1/10W 1/8W 1/4W 1/3W 3/4W 1W JUMPER JUMPER JUMPER JUMPER JUMPER JUMPER JUMPER JUMPER EIA Size 0201 0402 0603 0805 1206 1210 2010 2512 0201 0402 0603 0805 1206 1210 2010 2512 L 0.5 0.03 1.0 +0.1/-0.05 1.6 0.15 2.0 0.20 3.1 0.15 3.1 0.15 5.0 0.15 6.4 0.15 W 0.3 0.03 0.5 +0.1/-0.05 0.8 0.15 1.25 0.10 1.55 0.15 2.50 0.20 2.50 0.15 3.20 0.15 H T 0.25 0.05 0.1 0.05 0.3 0.05 0.2 0.1 0.45 0.1 0.3 0.15 0.5 0.10 0.35 0.20 0.55 0.10 0.45 0.20 0.55 0.10 0.50 0.20 0.55 0.10 1.00 0.20 0.55 0.10 1.30 0.20 Same as NRC02 Same as NRC04 Same as NRC06 Same as NRC10 Same as NRC12 Same as NRC25 Same as NRC50 Same as NRC100 t 0.15 0.05 0.25 0.1 0.3 0.15 0.35 0.15 0.35 0.15 0.50 0.25 0.50 0.25 0.60 0.30 CONSTRUCTION *Note: Lead Free terminations also available. Examples of Resistance Code: 4R7 = 4.7 ohms PART NUMBERING SYSTEM (E-24 VALUES) 100 = 10 ohms NRC12 J 103 TR F 10 101 = 100 ohms Optional 10,000 Piece Reel 102 = 1K ohms Optional Lead Free (100% Sn)* Tape & Reel Packaging Resistance Code: First 2 figures are significant, 3rd digit is the multiplier, "R" indicates a decimal point. Tolerance Code: J=5% (Std) Series and Size * NRC02 (0201 case size) are standard Pb free PART NUMBERING SYSTEM (E-96 VALUES) Examples of Resistance Code: NRC10 F 1003 TR F 10 Optional 10,000 Piece Reel Optional Lead Free (100% Sn)* Tape & Reel Packaging Resistance Code: First 3 figures are significant, 4rd digit is the multiplier, "R" indicates a decimal point. Tolerance Code: F=1% (Std) Series and Size * NRC02 (0201 case size) are standard Pb free 10R0 = 10 ohms 47R5 = 47.5 ohms 1000 = 100 ohms 1001 = 1K ohms 1002 = 10K ohms 1003 = 100K ohms 103 = 10K ohms 104 = 100K ohms 105 = 1 meg ohms 106 = 10meg ohms 1004 = 1meg ohms 1050 = 105 ohms 1501 = 1.5K ohms 1052 = 10.5K ohms 1153 = 115K ohms 1214 = 1.21meg ohms (R) 198 NIC COMPONENTS www.niccomp.com www.lowESR.com www.RFpassives.com Thick Film Chip Resistors NRC Series Marking (No marking on 0201 and 0402 size). 1. For E-12 & E-24 Series (5%-J, (STD) Tolerance In 0603, 0805, 1206, 1210, 2010 and 2512 sizes: 3 DIGIT SYSTEM - First two digits are significant and third digit is multiplier, "R" indicates decimal on values under 10 ohms. Examples: R10 = .10 ohms 103 = 10k ohms 1R0 = 1.0 ohms 101 = 100 ohms 102 = 1k ohms 470 = 47 ohms 104 = 100k ohms 105 = 1 megohms 2. For E-96 Series (1%-F Tolerance) in 0805, 1206 and 1210 sizes: 4 DIGIT SYSTEM - First 3 digits are significant and fourth digit is multiplier, "R" indicates decimal on values under 100 ohms. Examples: 0R10 = .10 ohms 1000 = 100 ohms 1R00 = 1.0 ohms 10R0 = 10 ohms 1003 = 100 kohms 1004 = 1 megohms 1001 = 1k ohms 1052 = 10.5k ohms 1002 = 10k ohms 2213 = 221k ohms 3. For E-96 Series (1% -F Tolerance) in 0603 size 3 DIGIT SYSTEM (Due to space restrictions) STANDARD E-12, E-24, E-96 VALUES AND 0603 RESISTANCE CODES E-12 10 12 15 18 22 27 33 39 47 56 68 82 91 E-24 Value 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 E-96 Value 100 110 121 133 147 162 178 196 215 237 261 287 316 348 383 422 464 511 562 619 681 750 825 909 Code 01 05 09 13 17 21 25 29 33 37 41 45 49 53 57 61 65 69 73 77 81 85 89 93 Value 102 113 124 137 150 165 182 200 221 243 267 294 324 357 392 432 475 523 576 634 698 768 845 931 Code 02 06 10 14 18 22 26 30 34 38 42 46 50 54 58 62 66 70 74 78 82 86 90 94 Value 105 115 127 140 154 169 187 205 226 249 274 301 332 365 402 442 487 536 590 649 715 787 866 953 Code 03 07 11 15 19 23 27 31 35 39 43 47 51 55 59 63 67 71 75 79 83 87 91 95 Value 107 118 130 143 158 174 191 210 232 255 280 309 340 374 412 453 499 549 604 665 732 806 887 976 Code 04 08 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 MULTIPLIER CODE Code A B C D E F G H X Y Z Multiplier 100 101 102 103 104 105 106 107 10-1 10-2 10-3 CODING FORMULA XX X Multiplier Code Example: 10.2k = 102 x 102 = 02C 02 C 33.2 = 332 x 10-1 = 51X 51 X Resistance Code MARKING EXAMPLES 10 = 01X 7.5k = 85B 150k = 18D 1 Meg = 01E (R) NIC COMPONENTS www.niccomp.com www.lowESR.com www.RFpassives.com 199 Thick Film Chip Resistors NRC Series TAPING SPECIFICATIONS (1) Availability Type Power EIA Rating Size Fig Material Width(mm) (pcs) Q'ty per 10" Reel (pcs) N/A Carrier Tape Q'ty per 7" Reel NRC02 1/20W 0201 A Paper 8 10,000 NRC04 1/16W 0402 A Paper 8 10,000 N/A NRC06 1/10W 0603 A Paper 8 5,000 10,000 NRC10 1/8W 0805 A Paper 8 5,000 10,000 NRC12 1/4W 1206 A Paper 8 5,000 10,000 NRC25 1/3W 1210 B Paper 12 4,000 N/A NRC04Z0 JUMPER 0402 A Paper 8 10,000 N/A NRC06Z0 JUMPER 0603 A Paper 8 5,000 N/A NRC10Z0 JUMPER 0805 A Paper 8 5,000 10,000 NRC12Z0 JUMPER 1206 A Paper 8 5,000 10,000 NRC25Z0 JUMPER 1210 B Paper 12 4,000 N/A (2) PAPER TAPE DIMENSIONS (mm) FIG. A * Same for JUMPER (Z0) types. 1.0 Max. (0201 Size 0.5 Max.) P0 P3 D E Cover tape F W B A 1.1 Max. (0201 Size 1.0 Max.) P1 P2 (R) 200 NIC COMPONENTS www.niccomp.com www.lowESR.com www.RFpassives.com Thick Film Chip Resistors NRC Series (3) EMBOSSED PLASTIC TAPE SPECIFICATION FIG. B. Type EIA Size A B NRC 50* 2010 2.9 0.1 5.4 0.1 NRC 100* 2512 3.6 0.1 6.9 0.1 D E F P0 P1 W 1.5 + 0.1 1.5 + 0.1 5.65 + 0.05 4.0 + 0.1 4.0 + 0.05 12.0 + 0.1 0.2 0.05 P0 D E Cover tape F W B A P1 1.1 Max. (4) REEL SPECIFICATIONS 2 .0 0. 5 178 2 21 0. 8 2.0 0.5 13 80 0.5 2 L 1. Leader tape : Approximately 250 m/ m (160mm for 0201 case size)leader shall be provided at each end of the tape. 2. Accumulative tolerance of feeding hole and chip pocket shall not exceed 0.2mm over 10 pitches. FIG. C. Type EIA Size NRC02* 0201 NRC04* 0402 NRC06* 0603 NRC10* 0805 NRC12* 1206 NRC25 1210 NRC50 2010 NRC100* 2512 L 1.5 10.0 10.0 10.0 10.0 10.0 10.0 13.5 13.5 * Same for JUMPER (Z0) types. 10 + 1.5 (R) NIC COMPONENTS www.niccomp.com www.lowESR.com www.RFpassives.com 201