54AC11
Triple 3-Input AND Gate
General Description
The ’AC11 contains three 3-input AND gates. Features
nI
CC
reduced by 50%
nOutputs source/sink 24 mA
nStandard Military Drawing (SMD)
n’AC11: 5962-87611
Logic Symbol
Pin Names Description
A
n
,B
n
,C
n
Inputs
O
n
Outputs
Connection Diagrams
FACTis a trademark of Fairchild Semiconductor Corporation.
IEEE/IEC
DS100262-1
Pin Assignment
for DIP and Flatpak
DS100262-3
Pin Assignment
for LCC
DS100262-2
July 1998
54AC11 Triple 3-Input AND Gate
© 1998 National Semiconductor Corporation DS100262 www.national.com
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage (V
CC
) −0.5V to +7.0V
DC Input Diode Current (I
IK
)
V
I
=−0.5V −20 mA
V
I
=V
CC
+ 0.5V +20 mA
DC Input Voltage (V
I
) −0.5V to V
CC
+ 0.5V
DC Output Diode Current (I
OK
)
V
O
=−0.5V −20 mA
V
O
=V
CC
+ 0.5V +20 mA
DC Output Voltage (V
O
) −0.5V to V
CC
+
0.5V
DC Output Source
or Sink Current (I
O
)±50 mA
DC V
CC
or Ground Current
per Output Pin (I
CC
or I
GND
)±50 mA
Storage Temperature (T
STG
) −65˚C to +150˚C
Junction Temperature (T
J
)
CDIP 175˚C
Recommended Operating
Conditions
Supply Voltage (V
CC
)
’AC 2.0V to 6.0V
Input Voltage (V
I
) 0VtoV
CC
Output Voltage (V
O
) 0VtoV
CC
Operating Temperature (T
A
)
54AC −55˚C to +125˚C
Minimum Input Edge Rate (V/t)
’AC Devices
V
IN
from 30%to 70%of V
CC
V
CC
@3.3V, 4.5V, 5.5V 125 mV/ns
Note 1: Absolute maximum ratings are those values beyond which damage
to the device may occur. The databook specifications should be met, without
exception, to ensure that the system design is reliable over its power supply,
temperature, and output/input loading variables. National does not recom-
mend operation of FACTcircuits outside databook specifications.
DC Characteristics for ’AC Family Devices
54AC
Symbol Parameter V
CC
T
A
=Units Conditions
(V) −55˚C to +125˚C
Guaranteed Limits
V
IH
Minimum High Level 3.0 2.1 V
OUT
=0.1V
Input Voltage 4.5 3.15 V or V
CC
0.1V
5.5 3.85
V
IL
Maximum Low Level 3.0 0.9 V
OUT
=0.1V
Input Voltage 4.5 1.35 V or V
CC
0.1V
5.5 1.65
V
OH
Minimum High Level 3.0 2.9 I
OUT
=−50 µA
Output Voltage 4.5 4.4 V
5.5 5.4 (Note 2)
V
IN
=V
IL
or V
IH
3.0 2.4 I
OH
= −12 mA
4.5 3.7 V I
OH
= −24 mA
5.5 4.7 I
OH
= −24 mA
V
OL
Maximum Low Level 3.0 0.1 I
OUT
=50 µA
Output Voltage 4.5 0.1 V
5.5 0.1 (Note 2)
V
IN
=V
IL
or V
IH
3.0 0.5 I
OL
=12mA
4.5 0.5 V I
OL
=24mA
5.5 0.5 I
OL
=24mA
I
IN
Maximum Input 5.5 ±1.0 µA V
I
=V
CC
, GND
Leakage Current
I
OLD
Minimum Dynamic
Output Current (Note 3) 5.5 50 mA V
OLD
=1.65V Max
I
OHD
5.5 −50 mA V
OHD
=3.85V Min
www.national.com 2
DC Characteristics for ’AC Family Devices (Continued)
54AC
Symbol Parameter V
CC
T
A
=Units Conditions
(V) −55˚C to +125˚C
Guaranteed Limits
I
CC
Maximum Quiescent 5.5 40.0 µA V
IN
=V
CC
Supply Current or GND
Note 2: All outputs loaded; thresholds on input associated with output under test.
Note 3: Maximum test duration 2.0 ms, one output loaded at a time.
Note 4: IIN and ICC @3.0V are guaranteed to be less than or equal to the respective limit @5.5V VCC.
ICC for 54AC @25˚C is identical to 74AC @25˚C.
AC Characteristics
54AC
V
CC
T
A
=−55˚C Fig.
Symbol Parameter (V) to +125˚C Units No.
(Note 5) C
L
=50 pF
Min Max
t
PLH
Propagation Delay 3.3 1.0 11.0 ns
5.0 1.0 8.5
t
PHL
Propagation Delay 3.3 1.0 10.5 ns
5.0 1.0 8.0
Note 5: Voltage Range 3.3 is 3.3V ±0.3V
Voltage Range 5.0 is 5.0V ±0.5V
Capacitance
Symbol Parameter Typ Units Conditions
C
IN
Input Capacitance 4.5 pF V
CC
=OPEN
C
PD
Power Dissipation 20.0 pF V
CC
=5.0V
Capacitance
3 www.national.com
4
Physical Dimensions inches (millimeters) unless otherwise noted
20 Terminal Ceramic Leadless Chip Carrier (L)
NS Package Number E20A
14 Lead Ceramic Dual-In-Line Package (D)
NS Package Number J14A
5 www.national.com
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DE-
VICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMI-
CONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or sys-
tems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose fail-
ure to perform when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
2. A critical component in any component of a life support
device or system whose failure to perform can be rea-
sonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: support@nsc.com
www.national.com
National Semiconductor
Europe Fax: +49 (0) 1 80-530 85 86
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 1 80-530 85 85
English Tel: +49 (0) 1 80-532 78 32
Français Tel: +49 (0) 1 80-532 93 58
Italiano Tel: +49 (0) 1 80-534 16 80
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
Email: sea.support@nsc.com
National Semiconductor
Japan Ltd.
Tel: 81-3-5620-6175
Fax: 81-3-5620-6179
14 Lead Ceramic Flatpak (F)
NS Package Number W14B
54AC11 Triple 3-Input AND Gate
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.