Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor Bi5-G18-Y1 threaded barrel, M18 x 1 chrome-plated brass 2-wire DC, nom. 8.2 VDC output according to DIN EN 609475-6 (NAMUR) cable connection M18 x 1 24/4 30 Wiring diagram 4 BN BU Type Ident-No. Bi5-G18-Y1 10060 Rated operating distance Sn Mounting mode Hysteresis (switching distance) Min. repeat accuracy Temperature drift Operating temperature 5 mm flush 1... 10 % 2 % 10 % -25 ...+ 70 C Voltage Current consumption (off-state) Current consumption (on-state) Max. switching frequency Output function nom. 8,2 VDC 2,1 mA 1,2 mA 1 kHz 2-wire, NAMUR Approval according to Internal inductivity (Li) / capacitivity (Ci) KEMA 02 ATEX 1090X 150 nF / 150 H * Marking of device * Value for pre-fixed cable up to 30m E II 2 G EEx ia IIC T6 (max. Ui = 15 V, Ii = 60 mA, Pi = 200 mW) Housing style Dimensions Housing material Active face Max. fixing torque of coupling nut Wiring Cable Cable cross section Vibration resistance Shock resistance Degree of protection threaded barrel; M18 x 1 34 mm metal, CuZn, chrome-plated plastic, PA12-GF30 25 Nm cable O 5,2, LiYY, PVC, 2 m 2 x 0,5 mm2 55 Hz (1 mm) 30 x g (11 ms) IP67 + Function principles Inductive proximity switches are designed for wear-free non-contact detection of metal objects. For this they use a high-frequency electro-magnetic AC field that interacts with the target. With inductive sensors, this field is generated by an LC resonant circuit with a ferrite core coil. Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor Bi5-G18-Y1 Mounting instructions Gap D Gap W Gap T Gap S Gap G minimum gap 2xB 3 x Sn 3xB 1,5 x B 6 x Sn Diameter of active face B O 18 mm G S D T W Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor Bi5-G18-Y1 Accessories Typ IM1-22EX-R/24VDC BST-18B IdentNo. 7541210 6947214 Description Dimension drawing Isolating switching amplifier, two channels; input for NAMUR signals; optional wire-break and short-circuit monitoring function; selectable normally open or normally closed performance; removeable terminal blocks; 18 mm wide; supply voltage 24 VDC; further isolating switching amplifiers in our "Interface Technology" catalogue. fixing clamp with dead-stop; material: PA6 10 11 12 7 8 9 Power Switching status Channel 1 Output mode Wire-break monitoring Short-circuit monitoring Channel 2 Pwr 1 2 NC WB SC NC WB SC NO 1 off off NO 2 off off IM1-22Ex-R 230VAC 4 1 5 2 6 3 M5 40 28 20 24 o 18 QM-18 6945102 30 quick-mount fixing clamp with dead-stop; material: chrome-plated brass external thread M24 x 1,5. 30/5 o 18 20,5 36 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264