Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition: • 15.04.2004
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition:
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Inductive sensor
Bi5-G18-Y1
●threaded barrel, M18 x 1
●chrome-plated brass
●2-wire DC, nom. 8.2 VDC
●output according to DIN EN 60947-
5-6 (NAMUR)
●cable connection
Wiring diagram
Function principles
Inductive proximity switches are designed
for wear-free non-contact detection of me-
tal objects. For this they use a high-fre-
quency electro-magnetic AC field that
interacts with the target. With inductive
sensors, this field is generated by an LC re-
sonant circuit with a ferrite core coil.
+
BN
BU
Type Bi5-G18-Y1
Ident-No. 10060
Rated operating distance Sn 5 mm
Mounting mode flush
Hysteresis (switching distance) 1... 10 %
Min. repeat accuracy ≤ 2 %
Temperature drift ≤ ± 10 %
Operating temperature -25 ...+ 70 °C
Voltage nom. 8,2 VDC
Current consumption (off-state) ≥ 2,1 mA
Current consumption (on-state) ≤ 1,2 mA
Max. switching frequency ≤ 1 kHz
Output function 2-wire, NAMUR
Approval according to KEMA 02 ATEX 1090X
Internal inductivity (Li) / capacitivity (Ci) 150 nF / 150 µH *
* Value for pre-fixed cable up to 30m
Marking of device É II 2 G EEx ia IIC T6
(max. Ui = 15 V, Ii = 60 mA, Pi = 200 mW)
Housing style threaded barrel; M18 x 1
Dimensions 34 mm
Housing material metal, CuZn, chrome-plated
Active face plastic, PA12-GF30
Max. fixing torque of coupling nut 25 Nm
Wiring cable
Cable Ø 5,2, LiYY, PVC, 2 m
Cable cross section 2 x 0,5 mm2
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 x g (11 ms)
Degree of protection IP67
24/4
30
4
M18 x 1
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition: • 15.04.2004
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition:
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Inductive sensor
Bi5-G18-Y1
Mounting instructions minimum gap
Gap D 2 x B
Gap W 3 x Sn
Gap T 3 x B
Gap S 1,5 x B
Gap G 6 x Sn
Diameter of active face B Ø 18 mm
W
G
D
S
T
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition: • 15.04.2004
Accessories
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition:
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Inductive sensor
Bi5-G18-Y1
Typ Ident-
No.
Description Dimension drawing
IM1-22EX-R/24VDC 7541210 Isolating switching amplifier, two channels; input for
NAMUR signals; optional wire-break and short-circuit
monitoring function; selectable normally open or nor-
mally closed performance; removeable terminal
blocks; 18 mm wide; supply voltage 24 VDC; further
isolating switching amplifiers in our "Interface Techno-
logy" catalogue.
BST-18B 6947214 fixing clamp with dead-stop; material: PA6
QM-18 6945102 quick-mount fixing clamp with dead-stop; material:
chrome-plated brass external thread M24 x 1,5.
546
213
Pwr
1110
IM1-22Ex-R
230VAC
12
879
12
NC
WB
SC
NC
WB
SC
NO
1
off
NO
2
off
off
off
Power
Channel 1
Output mode
Wire-break
monitoring
Short-circuit
monitoring
Channel 2
Switching status
ø 18
24
30
28 40
M5
20
30/5
ø 18
36
20,5
