PIN GRID ARRAY SOCKETS Series 510, 511, 515 Standard, Long Solder Tail ( & Low Profile e Series 510,511,&515 PGA sockets are available in three solder tail lengths: standard, long and low profile. e Choice of three low force clips to cover all applications. e Hi-Temp PCT polyester insulator material suitable for all forms of soldering. Ordering Information STANDARD SOLDER TAIL a SERIES 510 (-- .016--.022 1. Select pin type for PGA socket at left (standard, long or low profile) to determine series number. A _ + q .094 aN 10 2. Specify 2-digit plating code from chart at bottom of page . 165 i 4 (Note plating options available for each series under illustrations at left) NIN j 3. Locate footprint pattern from pages 44 to 48, the middle 8 digits of | 126 the part number will be located under the pattern. 028-035 {I L ] DIA. HOLE mt 20 DIA 4. Determine the last 2 digits of part number from the Contact Chart below. . Series Plating Winlow Clip Type PLATING OPTIONS: 13,91,93,97,99 Code a Nemes on | (8) LJ ILI-LIILI-LILI-L T Jel Ld. J SERIES 511 Lod Lo (- 116-.022 No. of pins Grid size Patten # tL yd Determined from footprint pattern pages 4 44 to 48 148 N 173 - ae tt \ EXAMPLE OF COMPLETE PART NUMBER : . ISS 22-8 510-93-068-11-061001 : cteeecces .028-.035 I F170 This is a 68 pin (11x11 grid) insulator with a .6" square : es OA HOE 5 ee window and fitted with standard solder tail socket pins. s| 6& [ee 020 DA LL Pins are tin plated, inner contacts are Mill-Max # 32 and : ae PLATING OPTIONS: 13,93 are plated 30 1 gold. secersese | LOW PROFILE PIN Clip SERIES 515 Type Contact (Clip) Chart | (- 016-021 01 Mill-Max #32 clip, standard low force, recommended for devices with less than 150 pins. See page 151 for details. f a94 - | 02 Mill-Max #35 clip, ultra low force, recommended for devices with 152. ' YY 122 __more than 150 pins, but less than 250 pins. See page 151 for details. | a .055-.079 03 Mill-Max #43 clip, ultra lite", recommended for devices with oso yO more than 250 pins. See page 151 for details. DIA. GE ee ______} an a _ 050 DIAL J Z SPECIFY PLATING CODE XX= 13 91 93 97 99 Sleeve (Pin) (== | 10 p" Au |200 p" Sn] 200 p" Sn {200 2" Sn}200 p" Sn PLATING OPTIONS: 13,93 Contact (Clip) Ss 30 w" Au | 10 p" Au | 30 nw" Au | Au Flash {200 nh" Sn Mill-Max Mfg. Corp., P.O. Box 300, 190 Pine Hollow Road, Oyster Bay, NY 11771-0300. Tel: 516-922-6000 Fax: 516-922-9253 37