855579 140 MHz SAW Filter Applications General Purpose For IF applications Product Features Functional Block Diagram Top view Typical 3 dB bandwidth of 1.7 MHz Low loss High Attenuation Dimensions: 19.00 x 6.50 x 1.75mm Single-ended operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant, Pb-free Input Gnd Gnd Gnd Gnd 10 9 8 7 6 1 2 3 4 5 Gnd Gnd Gnd Gnd Output General Description Pin Configuration The 855579 is a high-performance IF SAW filter with a center frequency of 140 MHz and a 3 dB bandwidth of 1.7 MHz. It features low loss with excellent attenuation, and is designed to be used with a single ended input and output. Pin # SE Description 10 5 1,6 2,3,4,7,8,9 Input Output Ground Case ground This device is RoHS compliant and Pb-free. Ordering Information Part No. Description 855579 855579-EVB packaged part evaluation board Standard T/R size = 2000 units/reel. Preliminary Data Sheet: Rev - 2/16/11 (c) 2011 TriQuint Semiconductor, Inc. - 1 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 855579 140 MHz SAW Filter Specifications Electrical Specifications (1) Specified Temperature Range: (2) -40 to +85 C Parameter (3) Center Frequency Insertion Loss Lower 1.0 dB Band Edge (5) Upper 1.0 dB Band Edge (5) Lower 3.0 dB Band Edge (5) Upper 3.0 dB Band Edge (5) Amplitude Variation(6) Phase Ripple Relative Attenuation (5) Source Impedance (single-ended) (7) Load Impedance (single-ended) (7) Conditions at 140 MHz 139.662 - 140.338 MHz 139.662 - 140.338 MHz 10 - 137 MHz 142 - 143 MHz 143 - 250 MHz 250 - 290 MHz 290 - 400 MHz - Min Typical (4) Max Units 140.4 45 40 45 40 45 - 140 11 139.3 140.7 139.1 140.8 0.4 3.0 54 48 47 54 60 50 50 14 139.6 0.8 6.0 - MHz dB MHz MHz MHz MHz dB p-p dB p-p dB dB dB dB dB Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to insertion loss at center frequency 6. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within defined frequency points 7. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating Operating Temperature Storage Temperature -40 to +85 oC -40 to +85 oC Operation of this device outside the parameter ranges given above may cause permanent damage. Preliminary Data Sheet: Rev - 2/16/11 (c) 2011 TriQuint Semiconductor, Inc. - 2 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 855579 140 MHz SAW Filter Reference Design - 50 SE Input, 50 SE Output Schematic 120nH 110nH 10 50 Single-ended Input 50 5 18nH 16nH 1,2,3,4 6,7,8,9 50 Single-ended Output 50 Notes: 1. Actual matching values may vary due to PCB layout and parasitics PC Board Mounting Configuration 8.86 2.51 960656 L1 L2 90073S0CN246-800181-000 SAWTEK 855579 JJJYM 58068 L3 6.70 L4 2.00 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031" thick Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick Hole plating: Copper min .0008m thick 1.22 .69 Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number L1 L2 L3 L4 SMA PCB 120nH 18nH 110nH 16nH N/A N/A Coil Wire-wound, 0805, 5% Coil Wire-wound, 0603, 5% Coil Wire-wound, 0805, 5% Coil Wire-wound, 0603 5% SMA connector 3-layer Coilcraft Coilcraft Coilcraft Coilcraft Radiall USA Inc. multiple 0805CS-121XJLC 0603CS-18NXJBC 0805CS-111XJLC 0603CS-16NXJBC 9602-1111-018 960656 Preliminary Data Sheet: Rev - 2/16/11 (c) 2011 TriQuint Semiconductor, Inc. - 3 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 855579 140 MHz SAW Filter Typical Performance (at room temperature) Preliminary Data Sheet: Rev - 2/16/11 (c) 2011 TriQuint Semiconductor, Inc. - 4 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 855579 140 MHz SAW Filter Mechanical Information Package Information, Dimensions and Marking Package Style: SMP-75 Dimensions: 19.00 x 6.50 x 1.75mm 90073S0CN246-800181-000 SAWTEK 855579 JJJYM 58068 ID Dot MFR NO. Date Code 1.75 NOM. 1.96 MAX. Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2-6m Ni plating All dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm 0.76 19.0 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and M= manufacturing code 1.91 1.80 R0.51 6.50 2.31 1.02 Tape and Reel Information Standard T/R size = 2000 units/reel. All dimensions are in millimeters ID dot 32.8 2.7 O330 0.3 4.0 2.0 O1.5 R0.75 A 1.75 14.2 32.0 19.6 O102 O20.2 O13.0 2.0 28.4 Direction of travel 0.20 2.3 Section A-A Preliminary Data Sheet: Rev - 2/16/11 (c) 2011 TriQuint Semiconductor, Inc. - 5 of 6 - 7.1 12.0 O1.5 A Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 855579 140 MHz SAW Filter Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, lead free solder, 260C Refer to Soldering Profile for recommended guidelines. ESD Rating: 3A Value: Passes 4100. Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114 This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). ESD Rating: C Value: Passes 1000. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free MSL Rating Devices are Hermetic, therefore MSL is not applicable. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: applications.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Preliminary Data Sheet: Rev - 2/16/11 (c) 2011 TriQuint Semiconductor, Inc. - 6 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R)