Micro-D Latching MicroStri ps Series 171 MicroStrips Single Row Strips with Insulated Wire 171-003 Single Row MicroStrips with Insulated Stranded Wire 171-003-7P-6K7-18-P1CL These .050" pitch single row microstrips are factory-terminated to military-grade hookup wire. Crimp termination. Available with 1 to 30 contacts. Optional latching mechanism prevents de-mating. Guide pins provide circuit polarization. Contacts are twistpin type and are gold-plated. Housing is molded LCP thermoplastic. Available with standard M22759/11 ETFE wire, or upgrade to M22759/33 space grade wire. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3 A., 600 Vac, -55C to +150C. Wire is 600V, 200C. How To Order Single Row Microstrips With Insulated Wire Series Number of Cavities 171-003 -1 to -30 Single Row Total Number MicroStrip, of Cavities .050" Contact including Spacing, guide Pre-Wired, pins,latches Stranded Wire and mounting holes. The number of cavities equals the number of electrical circuits plus 1 cavity for each guide pin and latch, plus 6 cavities for the mounting hole option. Contact Type P Pin Contacts Wire Gage -4 #24 AWG -6 S Socket Contacts #26 AWG -8 #28 AWG -0 #30 AWG Wire Type K Standard Wire -7 -6 Optional Guide Pin Optional Latch Optional Mounting Holes Wire Omit Omit Length In For No Guide For No Latch Inches Pin 18 are 1-10 are solid color, frequently used Space Grade 11-up are lengths. striped. J Wire High Strength, Lightweight, Crosslinked Modified ETFE per M22759/33, Silver-Plated Conductors P 1 White Wire Length Example: Extruded 5 PTFE per CL -P1 Color-18 M22759/11, Coded Guide Pin in Center Latch Silver-Plated per MIL- 18 inches Cav. #1 Conductors STD-681 (#30 AWG 6, 12 and not available) Wires Sample Part Number 171-003 Wire Color Code K -PB BL Guide Pin at Latch at Both Both Ends Ends 7 10 Color Repeat Wires are solid color per MILSTD-681 color code system. Wires #1, #11, #21 are black, wires #2, #12, #22 are brown, and so on. 7 -P(x) Replace (X) with guide pin location. P3 shown below: -18 -P1 Omit For No Mounting Holes MH Mounting Holes The three cavities on each end are filled with epoxy. Two .062" (1.57mm) holes are cross-drilled to allow for attachment to a mounting surface. CL Q (c) 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com Q-7 www.glenair.com Micro-D Latching MicroStri ps Series 171 MicroStrips Single Row Strips with Solid or Stranded Wire 171-002 and 171-003 PIN CONNECTOR SOCKET CONNECTOR LENGTH MIN .075 (1.91) TYP .075 (1.91) TYP 2Xo.062 (1.57) .125 (3.18) .050 (1.27) MAX C LENGTH MIN .125 (3.18) .125 (3.18) .050 (1.27) MAX .300 (7.62) 2Xo.062 (1.57) .110 (2.79) MAX .062 (1.57) .125 (3.18) C .135/.116 (3.43/2.95) .075 (1.91) MAX .075 (1.91) .075 (1.91) .200 (5.08) REF .075 (1.91) (A) B (A) B Dimensions # of Cavities 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 (A) B Max. C In. mm. In. mm. In. mm. .050 .100 .150 .200 .250 .300 .350 .400 .450 .500 .550 .600 .650 .700 1.27 2.54 3.81 5.08 6.35 7.62 8.89 10.16 11.43 12.70 13.97 15.24 16.51 17.78 .085 .135 .185 .235 .285 .335 .385 .435 .485 .535 .585 .635 .685 .735 .785 2.16 3.43 4.70 5.97 7.24 8.51 9.78 11.05 12.32 13.59 14.86 16.13 17.40 18.67 19.94 N/A N/A N/A N/A N/A N/A .200 .250 .300 .350 .400 .450 .500 .550 .600 N/A N/A N/A N/A N/A N/A 5.08 6.35 7.62 8.89 10.16 11.43 12.7 13.97 15.24 # of Cavities 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 (A) B Max. C In. mm. In. mm. In. mm. .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 1.400 1.450 19.05 20.32 21.59 22.86 24.13 25.40 26.67 27.94 29.21 30.48 31.75 33.02 34.29 35.56 36.83 .835 .885 .935 .985 1.035 1.085 1.135 1.185 1.235 1.285 1.335 1.385 1.435 1.485 1.535 21.21 22.48 23.75 25.02 26.29 27.56 28.83 30.10 31.37 32.64 33.91 35.18 36.45 37.72 38.99 .650 .700 .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 16.51 17.78 19.05 20.32 21.59 22.86 24.13 25.4 26.67 27.94 29.21 30.48 31.75 33.02 34.29 Center Latch Locations Even Number of Cavities Odd Number of Cavities PIN CONNECTOR SOCKET CONNECTOR Q CAVITY 1 PIN CONNECTOR SOCKET CONNECTOR CAVITY 1 CAVITY 1 Latch placed on next lower cavity prior to centerline. Latch position = (# of Cavities) / 2. (c) 2011 Glenair, Inc. U.S. CAGE Code 06324 CAVITY 1 Latch placed in cavity on centerline. Latch Position = (# of Cavities+1) / 2. Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com Q-8 www.glenair.com