Data sheet| Item number:2091-1123 1-conductor female plug; 1.5 mm; Pin spacing 3.5 mm; 3-pole; 1,50 mm; light gray www.wago.com/2091-1123 i Picture differs from the item. Color: L = (pole no. - 1) x pin spacing Item description Universal connection of all conductor types Simple, push-in termination of solid and ferruled conductors Easy-to-use design does not require special tools Ability to wire while mated or unmated Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 23.11.2020Page 1/8 Data sheet| Item number:2091-1123 www.wago.com/2091-1123 Ability to wire while mated or unmated Testing parallel to conductor entry - tip contact Also available with gripping plates Integrated locking latches prevent accidental disconnection Safety information 1: The picoMAX(R) Pluggable Connection System includes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated. Data Electrical data Ratings per IEC/EN 60664-1 Ratings per IEC/EN 60664-1 Nominal voltage (III/3) 160V Rated surge voltage (III/3) 2.5kV Rated voltage (III/2) 160V Rated surge voltage (III/2) 2.5kV Nominal voltage (II/2) 320V Rated surge voltage (II/2) 2.5kV Rated current 10A Legend (ratings) (III / 2) Overvoltage category III / Pollution degree 2 Ratings per UL 1059 Approvals per UL 1059 Rated voltage UL (Use Group B) 300V Rated current UL (Use Group B) 10A Rated voltage UL (Use Group D) 300V Rated current UL (Use Group D) 10A Ratings per CSA Approvals per CSA Connection data Connection technology Push-in CAGE CLAMP(R) Actuation type Push-button Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 23.11.2020Page 2/8 Data sheet| Item number:2091-1123 www.wago.com/2091-1123 Actuation type Push-button Solid conductor 0.2 ... 1.5mm/ 24 ... 14AWG Fine-stranded conductor 0.2 ... 1.5mm/ 24 ... 14AWG Fine-stranded conductor; with insulated ferrule 0.25 ... 0.75mm Fine-stranded conductor; with uninsulated ferrule 0.25 ... 1.5mm Strip length 8 ... 9mm/ 0.31 ... 0.35inch Pole No. 3 Total number of connection points 3 Total number of potentials 3 Number of connection types 1 Number of levels 1 Physical data Pin spacing 3.5mm/ 0.138inch Width 10.5mm/ 0.413inch Height 14mm/ 0.551inch Depth 11.4mm/ 0.449inch Plug-in connection Contact type (pluggable connector) Female connector/socket Connector (connection type) for conductor Mismating protection No Material Data Color light gray Material group I Insulation material Polyphthalamide (PPA GF) Flammability class per UL94 V0 Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (ECu) Contact plating tin-plated Fire load 0.034MJ Weight 1.4g Environmental Requirements Limit temperature range -60 ... +100C Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 23.11.2020Page 3/8 Data sheet| Item number:2091-1123 www.wago.com/2091-1123 Commercial data Product Group 26 (picoMAX) Packaging type BOX Country of origin DE GTIN 4050821160762 Customs tariff number 85366990990 Approvals / Certificates Country specific Approvals Logo Certificate name Approval Additional Approval Text CB DEKRA Certification B.V. IEC 61984 NL-49736 /A1 CSA DEKRA Certification B.V. C22.2 2362521 KEMA/KEUR DEKRA Certification B.V. EN 61984 71102260 REV.1 Approval Additional Approval Text UL Underwriters Laboratories Inc. UL 1977 20190909E45171 UR Underwriters Laboratories Inc. UL 1059 E4517220100415 UL-Approvals Logo Certificate name Counterpart Item no.2091-1403 THT male header; 1.0 mm O solder pin; straight; Pin spacing 3.5 mm; 3-pole; light gray www.wago.com/2091-1403 Item no.2091-1403/005-000 Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 23.11.2020Page 4/8 Data sheet| Item number:2091-1123 www.wago.com/2091-1123 Item no.2091-1403/005-000 THT male header; 1.0 mm O solder pin; straight; clamping collar; Pin spacing 3.5 mm; 3-pole; light gray www.wago.com/2091-1403 /005-000 Item no.2091-1403/200-000 THR male header; 1.0 mm O solder pin; straight; Pin spacing 3.5 mm; 3-pole; light gray www.wago.com/2091-1403 /200-000 Item no.2091-1403/205-000 THR male header; 1.0 mm O solder pin; straight; clamping collar; Pin spacing 3.5 mm; 3-pole; light gray www.wago.com/2091-1403 /205-000 Item no.2091-1423 THT male header; 1.0 mm O solder pin; angled; Pin spacing 3.5 mm; 3-pole; light gray www.wago.com/2091-1423 Item no.2091-1423/200-000/997-406 THR male header; 1.0 mm O solder pin; angled; in tape-and-reel packaging; Pin spacing 3.5 mm; 3pole; light gray www.wago.com/2091-1423 /200-000/997-406 Item no.2091-1423/200-000 THR male header; 1.0 mm O solder pin; angled; Pin spacing 3.5 mm; 3-pole; light gray www.wago.com/2091-1423 /200-000 Item no.2091-1423/205-000 www.wago.com/2091-1423 THR male header; 1.0 mm O solder pin; angled; clamping collar; Pin spacing 3.5 mm; 3-pole; light gray /205-000 Item no.2091-1423/005-000 www.wago.com/2091-1423 THT male header; 1.0 mm O solder pin; angled; clamping collar; Pin spacing 3.5 mm; 3-pole; light gray /005-000 Item no.2091-1503/002-000 1-conductor male connector; Gripping plate; 1.5 mm; Pin spacing 3.5 mm; 3-pole; 1,50 mm; light gray www.wago.com/2091-1503 /002-000 Item no.2091-1503/002-3000 1-conductor male connector; Gripping plate; direct marking; 1.5 mm; Pin spacing 3.5 mm; 3-pole; 1,50 mm; light gray www.wago.com/2091-1503 /002-3000 Item no.2091-1523/002-000 1-conductor male connector; Integrated release lever; 1.5 mm; Pin spacing 3.5 mm; 3-pole; 1,50 mm; light gray www.wago.com/2091-1523 /002-000 Item no.2091-1523/002-3000 www.wago.com/2091-1523 1-conductor male connector; Integrated release lever; direct marking; 1.5 mm; Pin spacing 3.5 mm; /002-3000 3-pole; 1,50 mm; light gray Item no.2091-1523/020-3000 1-conductor male connector; Snap-in mounting feet; Integrated release lever; direct marking; 1.5 mm; Pin spacing 3.5 mm; 3-pole; 1,50 mm; light gray www.wago.com/2091-1523 /020-3000 Item no.2091-1524/020-000 1-conductor male connector; Snap-in mounting feet; Integrated release lever; 1.5 mm; Pin spacing Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com www.wago.com/2091-1524 Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 23.11.2020Page 5/8 Data sheet| Item number:2091-1123 www.wago.com/2091-1123 1-conductor male connector; Snap-in mounting feet; Integrated release lever; 1.5 mm; Pin spacing 3.5 mm; 4-pole; 1,50 mm; light gray www.wago.com/2091-1524 /020-000 Item no.2091-1703 Solder pin strip; 1.0 mm O solder pin; straight; Pin spacing 3.5 mm; 3-pole; black www.wago.com/2091-1703 Item no.2091-1703/200-000 Solder pin strip; 1.0 mm O solder pin; straight; Pin spacing 3.5 mm; 3-pole; black www.wago.com/2091-1703 /200-000 Item no.2091-1723 Solder pin strip; 1.0 mm O solder pin; angled; Pin spacing 3.5 mm; 3-pole; black www.wago.com/2091-1723 Item no.2091-1723/200-000 Solder pin strip; 1.0 mm O solder pin; angled; Pin spacing 3.5 mm; 3-pole; black www.wago.com/2091-1723 /200-000 Compatible products Coding Item no.: 2091-1610 Coding key carrier; suitable for 3.5 mm pin spacing; orange www.wago.com/2091-1610 Strain relief plate Item no.: 2091-1601 Gripping plate; light gray www.wago.com/2091-1601 Item no.: 2091-1601/002-000 Gripping plate with sliding connector release; light gray www.wago.com/2091-1601 /002-000 Item no.: 735-500 Test pin; 1 mm O; with solder connection for test wire www.wago.com/735-500 Item no.: 2092-1630 Unlocking tool; orange www.wago.com/2092-1630 Item no.: 210-719 Operating tool; Blade: 2.5 x 0.4 mm; with a partially insulated shaft www.wago.com/210-719 check tools Downloads Documentation Additional Information Technical explanations Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Apr 3, 2019 pdf Download Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 23.11.2020Page 6/8 Data sheet| Item number:2091-1123 www.wago.com/2091-1123 Technical explanations Apr 3, 2019 pdf 3.6 MB Download URL Download URL Download CAD/CAE-Data CAD data 2D/3D Models 2091-1123 CAE data ZUKEN Portal 2091-1123 Installation Notes Locking lever Disconnecting female connector via unlocking tool. Plug unlocking tool into the male header's locking latch. Insert unlocking tool until it hits backstop. Wedge opens locking latch. Pull on both unlocking tool and conductors to remove female connector from male header. Inserting fine-stranded conductor into unmated female connector via push-button. Inserting solid and ferruled conductors via push-in termination Conductor termination Inserting fine-stranded conductor into mated female connector via push-button. Marking Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 23.11.2020Page 7/8 Data sheet| Item number:2091-1123 www.wago.com/2091-1123 Marking Pole marking via factory direct printing. Coding Coding a female connector (via coding key carrier and two keys for female connector, see symbol). Testing Testing with 1 mm O test pin, tip contact. Subject to changes. Please also observe the further product documentation! WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 23.11.2020Page 8/8