19-3147; Rev 0; 1/04 Low-Cost, 2.7V to 5.5V Temperature Switches in a SOT23 The MAX6514/MAX6515 low-cost, fully integrated temperature switches assert a logic signal when their die temperature crosses a factory-programmed threshold. Operating from a 2.7V to 5.5V supply, these devices feature a fixed voltage reference, an analog temperature sensor, and a comparator. They are available with factory-trimmed temperature trip thresholds from -45C to +15C and +35C to +115C in 10C increments, and are accurate to 1C (typ). These devices require no external components and typically consume 22A of supply current. Hysteresis is pin selectable at 2C or 10C. The MAX6514/MAX6515 are offered with hot-temperature thresholds (+35C to +115C), asserting when the temperature is above the threshold or with cold-temperature thresholds (-45C to +15C), asserting when the temperature is below the threshold. The MAX6514/ MAX6515 can be used over a -35C to +125C range with a supply voltage of 2.7V to 5.5V. For applications sensing temperature down to -45C, a supply voltage above 4.5V is required. The MAX6514 has an active-high, push-pull output. The MAX6515 has an active-low, open-drain output. These devices are available in a space-saving 5-pin SOT23 package and operate over the -55C to +125C temperature range. Applications Over/Undertemperature Protection Fan Control Test Equipment Temperature Control Temperature Alarms Notebook, Desktop PCs RAID Servers Features High-Accuracy +1.5C (max) over -15C to +65C Temperature Range Low-Power Consumption: 22A Typical Current Factory-Programmed Thresholds from -45C to +115C in 10C Increments Open-Drain or Push-Pull Outputs Pin-Selectable 2C or 10C Hysteresis Low Cost Ordering Information TEMP RANGE PINPACKAGE MAX6514UK_ _ _ _-T* -55C to +125C 5 SOT23-5 MAX6515UK_ _ _ _-T* -55C to +125C 5 SOT23-5 PART *These parts are offered in 16 standard temperature versions with a minimum order of 2500 pieces. To complete the suffix information, add P or N for positive or negative trip temperature, and select an available trip point in degrees centigrade. For example, the MAX6514UKP065-T describes a MAX6514 in a 5-pin SOT23 package with a +65C threshold in tape and reel (2.5k minimum order). Contact the factory for pricing and availability. Typical Operating Circuit VCC 100k VCC VCC TOVER Pin Configurations and Functional Diagram appear at end of data sheet. 0.1F INT MAX6515 MICROCONTROLLER GND GND HYST GND ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 MAX6514/MAX6515 General Description MAX6514/MAX6515 Low-Cost, 2.7V to 5.5V Temperature Switches in a SOT23 ABSOLUTE MAXIMUM RATINGS All Voltages Are Referenced to GND VCC ..........................................................................-0.3V to +6V TOVER, TUNDER (open drain)................................ -0.3V to +6V TOVER, TUNDER (push-pull)....................... -0.3V to VCC + 0.3V HYST .............................................................-0.3V to VCC + 0.3V Continuous Power Dissipation 5-Pin SOT23 (derate 7.1mW/C above +70C)............571mW Operating Temperature Range ........................-55C to +125C Junction Temperature ..................................................... +150C Storage Temperature Range .............................-65C to +150C Lead Temperature (soldering, 10s) ................................ +300C Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (VCC = 2.7V to 5.5V, RPULLUP = 100k, (open-drain output only), TA = -55C to +125C, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER Supply Voltage Range Supply Current Temperature Threshold Accuracy (Note 2) SYMBOL CONDITIONS VCC ICC TTH HYST Input Threshold (Note 4) THYST TYP 2.7 Hot-temperature thresholds (+35C to +115C) 22 Cold-temperature thresholds (-45C to +15C) 40 Logic Output Voltage Low (Push-Pull and Open Drain) VOL 5.5 V 40 -1.5 +1.5 +75C to +115C -2.5 +2.5 -3 2 HYST = GND 10 C 0.8 x VCC 0.2 x VCC ISOURCE = 500A, VCC > 2.7V 0.8 x VCC ISOURCE = 800A, VCC > 4.5V VCC - 1.5 C +3 HYST = VCC VIL VOH UNITS -15C to +65C VIH Logic Output Voltage High (Push-Pull) MAX A -45C to -25C (Note 3) Temperature Threshold Hysteresis MIN V V ISINK = 1.2mA, VCC > 2.7V 0.3 ISINK = 3.2mA, VCC > 4.5V 0.4 V Open-Drain Output Leakage VCC = 2.7V, open-drain output = 5.5V 10 nA Current Note 1: 100% production tested at TA = +25C. Specifications over temperature are guaranteed by design. Note 2: The MAX6514/MAX6515 are available with internal factory-programmed temperature trip thresholds from -45C to +15C and +35C to +115C in 10C increments. Note 3: VCC must be greater than 4.5V for a switching threshold of -45C. Note 4: Guaranteed by design. 2 _______________________________________________________________________________________ Low-Cost, 2.7V to 5.5V Temperature Switches in a SOT23 TRIP THRESHOLD ACCURACY 40 30 MAX6514 toc02 SAMPLE SIZE = 147 25 SUPPLY CURRENT (A) PERCENTAGE OF PARTS SAMPLED (%) SUPPLY CURRENT vs. TEMPERATURE MAX6514 toc01 50 30 20 10 20 15 10 5 0 -1.25 TO -0.75 TO -0.25 TO 0.25 TO 0.75 TO 1.25 TO -1.0 -0.5 -1.5 0.5 1.0 1.5 0 -55 -35 -15 5 ACCURACY (C) TOVER/TUNDER OUTPUT VOLTAGE HIGH vs. SOURCE CURRENT 45 65 85 105 125 TOVER/TUNDER OUTPUT VOLTAGE LOW vs. SINK CURRENT 4 MAX6514 toc04 500 MAX6514 toc03 5 400 3 VOL (V) VOH (V) 25 TEMPERATURE (C) 300 2 200 1 100 0 0 0 1 2 3 4 5 6 7 8 9 10 0 ISINK (mA) 1 2 3 4 5 6 STARTUP AND POWER-DOWN (TEMP < TTH) 8 9 10 STARTUP DELAY (TEMP > TTH) MAX6514 toc06 MAX6514 toc05 TIME (400s/div) 7 ISINK (mA) VCC (2V/div) VCC (2V/div) TOVER (2V/div) TOVER (2V/div) TIME = 100s _______________________________________________________________________________________ 3 MAX6514/MAX6515 Typical Operating Characteristics (VCC = 4.5V, TA = +25C, unless otherwise noted.) Low-Cost, 2.7V to 5.5V Temperature Switches in a SOT23 MAX6514/MAX6515 Pin Description PIN NAME FUNCTION MAX6514 MAX6515 1, 2 1, 2 GND 3 3 HYST 4 4 VCC 5 -- TOVER Push-Pull Active-High Output (Hot Threshold). TOVER goes high when the die temperature exceeds the factory-programmed hot-temperature threshold. -- 5 TOVER Open-Drain, Active-Low Output (Hot Threshold). TOVER goes low when the die temperature exceeds the factory-programmed hot-temperature threshold. Connect to a 100k pullup resistor. Can be pulled up to a voltage higher than VCC. 5 -- TUNDER Push-Pull Active-High Output (Cold Threshold). TUNDER goes high when the die temperature falls below the factory-programmed cold-temperature threshold. -- 5 TUNDER Open-Drain, Active-Low Output (Cold Threshold). TUNDER goes low when the die temperature goes below the factory-programmed cold-temperature threshold. Connect to a 100k pullup resistor. Can be pulled up to a voltage higher than VCC. Ground Hysteresis Input. Connect to VCC for 2C of hysteresis or to GND for 10C hysteresis. Input Supply. Bypass to ground with a 0.1F capacitor. Detailed Description Logic Temperature Indicators The MAX6514/MAX6515 fully integrated temperature switches incorporate a fixed reference, an analog temperature sensor, and a comparator. Pin-selectable 2C or 10C hysteresis keeps the digital output from oscillating when the die temperature approaches the threshold temperature. The MAX6514 has an activehigh, push-pull output structure that can sink or source current. The MAX6515 has an active-low, open-drain output structure that can only sink current. The internal power-on reset circuit guarantees the logic output is at its +25C state for at least 50s. Overtemperature Indicator (Hot Thresholds) TOVER and TOVER designations apply to thresholds above T A = +25C (+35C, +45C, +55C, +65C, +75C, +85C, +95C, +105C, and +115C). All "hot" thresholds are positive temperatures. The overtemperature indicator output is open drain active low (TOVER) or push-pull active high (TOVER). TOVER goes low when the die temperature exceeds the factory-programmed temperature threshold. TOVER should be pulled up to a voltage no greater than 5.5V with a 100k pullup resistor. TOVER is a push-pull active-high CMOS output that goes high when the die temperature exceeds the factory-programmed temperature threshold. Hysteresis Input The HYST input selects the devices' temperature hysteresis and prevents the output from oscillating when the temperature approaches the trip point. Connect HYST to VCC for 2C hysteresis or to GND for 10C hysteresis. 4 Undertemperature Indicator (Cold Thresholds) TUNDER and TUNDER designations apply to thresholds below TA = +25C (+15C, +5C, -5C, -15C, -25C, -35C, -45C). The undertemperature indicator output is open-drain, active low (TUNDER) or push-pull, active high (TUNDER). TUNDER goes low when the die temperature goes below the factory-programmed temperature threshold. TUNDER should be pulled up to a voltage no greater than 5.5V with a 100k pullup resistor. TUNDER is a push-pull active-high CMOS output that goes high when the die temperature falls below the factory-programmed temperature threshold. _______________________________________________________________________________________ Low-Cost, 2.7V to 5.5V Temperature Switches in a SOT23 Temperature-Window Alarm The MAX6515 logic output asserts when the die temperature is outside the factory-programmed range. Combining the outputs of two devices creates an over/undertemperature alarm. Two MAX6515s are used to form two complementary pairs, containing one cold trip-point output and one hot trip-point output. The assertion of either output alerts the system to an out-ofrange temperature (Figure 1). The thermal overrange signal can be used to assert a thermal shutdown, power-up, recalibration, or other temperature-dependent function. The typical thermal resistance is +140C/W for the 5pin SOT23 package. To limit the effects of self-heating, minimize the output current. For example, if the MAX6514/MAX6515 sink 1mA, the open-drain output voltage is guaranteed to be less than 0.3V. Therefore, an additional 0.3mW of power is dissipated within the IC. This corresponds to a 0.042C shift in the die temperature in the 5-pin SOT23 package. +5V 100k OUT OF RANGE VCC Low-Cost, Fail-Safe Temperature In high-performance/high-reliability applications, multiple temperature monitoring is important. The high-level integration and low cost of the MAX6514/MAX6515 facilitate the use of multiple temperature monitors to increase system reliability. The Figure 2 application uses two MAX6514s with different hot-temperature thresholds to ensure that fault conditions that can overheat the monitored device cause no permanent damage. The first temperature monitor activates the fan when the die temperature exceeds +45C. The second MAX6514 triggers a system shutdown if the die temperature reaches +75C, preventing damage from a wide variety of destructive fault conditions, including latchups, short circuits, and cooling-system failures. TUNDER MAX6515UKP075 MAX6515UKN005 GND GND HYST GND GND HYST Figure 1. Temperature-Window Alarms Using the MAX6515 +5V VCC Thermal Considerations The MAX6514/MAX6515 supply current is typically 22A. When used to drive high-impedance loads, the devices dissipate negligible power and self-heating effects are minimized. Accurate temperature monitoring depends on the thermal resistance between the device being monitored and the MAX6514/MAX6515 die. Heat flows in and out of plastic packages, primarily through the leads. Pin 2 of the 5-pin SOT23 package provides the lowest thermal resistance to the die. Short, wide copper traces between the MAX6514/MAX6515 and the objects whose temperature is being monitored ensure heat transfers occur quickly and reliably. The rise in die temperature due to self-heating is given by the following formula: TJ = PDISSIPATION x JA where P DISSIPATION is the power dissipated by the MAX6514/MAX6515, and JA is the thermal resistance of the package. VCC TOVER SYSTEM SHUTDOWN TOVER MAX6514UKP075 HEAT P GND GND HYST VCC HYST GND FAN CONTROL TOVER MAX6514UKP045 HEAT GND GND Figure 2. Low-Power, High-Reliability, Fail-Safe Temperature Monitor _______________________________________________________________________________________ 5 MAX6514/MAX6515 Applications Information MAX6514/MAX6515 Low-Cost, 2.7V to 5.5V Temperature Switches in a SOT23 Table 1. Top Marks PART TOP MARK PART TOP MARK MAX6514UKN005 AEKU MAX6515UKN005 AEMK AEKV MAX6515UKN015 AEML MAX6514UKN025 AEKW MAX6515UKN025 AEMM MAX6514UKN035 AECV MAX6515UKN035 AECX MAX6514UKN045 AEKX MAX6515UKN045 AEMN MAX6514UKP005 AEKY MAX6515UKP005 AEMO MAX6514UKP015 AEKZ MAX6515UKP015 AEMP MAX6514UKP035 AELA MAX6515UKP035 AEMQ MAX6514UKP045 AELB MAX6515UKP045 AEMR MAX6514UKP055 AELC MAX6515UKP055 AEMS MAX6514UKP065 AELD MAX6515UKP065 AEMT MAX6514UKP075 AECW MAX6515UKP075 AECY MAX6514UKP085 AELE MAX6515UKP085 AEMU MAX6514UKP095 AELF MAX6515UKP095 AEMV MAX6514UKP105 AELG MAX6515UKP105 AEMW MAX6514UKP115 AELH MAX6515UKP115 AEMX MAX6514UKN015 Pin Configurations TOP VIEW HOT THRESHOLDS (+35C TO +115C) COLD THRESHOLDS (-45C TO +15C) GND GND 1 1 GND 2 5 (MAX6514) MAX6515 HYST 3 GND 2 4 SOT23 6 (TOVER) TOVER VCC 5 (TUNDER) TUNDER 4 VCC (MAX6514) MAX6515 HYST 3 SOT23 _______________________________________________________________________________________ Low-Cost, 2.7V to 5.5V Temperature Switches in a SOT23 V MAX6514 (HOT THRESHOLD) TOVER TOVER NEGATIVE TEMPCO SENSOR MAX6514 FIXED REFERENCE HYST NETWORK HYST COLD +25C HOT TEMP MAX6515 (HOT THRESHOLD) WITH 100k PULLUP V TOVER TTH TOVER NEGATIVE TEMPCO SENSOR MAX6515 FIXED REFERENCE HYST NETWORK HYST COLD +25C V HOT TEMP MAX6514 (COLD THRESHOLD) TUNDER TUNDER NEGATIVE TEMPCO SENSOR MAX6514 TTH FIXED REFERENCE HYST NETWORK HYST COLD HOT TEMP MAX6515 (COLD THRESHOLD) WITH 100k PULLUP V TUNDER +25C TTH TUNDER NEGATIVE TEMPCO SENSOR MAX6515 FIXED REFERENCE HYST NETWORK HYST COLD TTH +25C HOT TEMP Chip Information TRANSISTOR COUNT: 1808 PROCESS: BiCMOS _______________________________________________________________________________________ 7 MAX6514/MAX6515 MAX6514/MAX6515 Functional Diagram Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to www.maxim-ic.com/packages.) SOT-23 5L .EPS MAX6514/MAX6515 Low-Cost, 2.7V to 5.5V Temperature Switches in a SOT23 PACKAGE OUTLINE, SOT-23, 5L 21-0057 E 1 1 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 8 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2004 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.