VW 2x60 AC Controller Modules VRSM VDSM IRMS = 2x 60 A VRRM = 1200-1600 V 1 VRRM VDRM Type 1200 1400 1600 VW2x60-12io1 VW2x60-14io1 VW2x60-16io1 2 5 4 1 4 2 5 VV 1200 1400 1600 9 10 7 Symbol Conditions IRMS ITRMS ITAVM TC = 85C; 50 - 400 Hz (per phase) TVJ = TVJM TC = 85C; (180 sine) ITSM TVJ = 45C VR = 0 I2t (di/dt)cr 6 9 10 Maximum Ratings 60 43 27 A A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 520 560 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 470 510 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1350 1320 A2s A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1100 1090 A2s A2s TVJ = TVJM repetitive, IT = 45 A f =50 Hz, tP =200 s VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/s 100 A/s 500 A/s 2 (dv/dt)cr TVJ = TVJM VDR = /3 VDRM RGK = ; method 1 (linear voltage rise) PGM TVJ = TVJM IT = ITAVM 1000 tp = 30 s tp = 300 s V/s PGAVM 10 5 0.5 W W W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 C C C 3000 3600 V~ V~ VISOL 50/60 Hz, RMS IISOL < 1 mA t = 1 min t=1s Md Mounting torque (M5) Weight typ. 6 7 Features * Thyristor controller for AC (circuit W2C acc. to IEC) for mains frequency * Soldering connections for PCB mounting * Isolation voltage 3600 V~ * Planar passivated chips * UL applied Applications * Switching and control of three phase AC circuits * Softstart AC motor controller * Solid state switches * Light and temperature control Advantages * Easy to mount with two screws * Space and weight savings * Improved temperature and power cycling 2-2.5/18-22 Nm/lb.in. 35 g Data according to IEC 60747 refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions (c) 2008 IXYS All rights reserved 20080828a 1-3 http://store.iiic.cc/ G VW 2x60 Symbol Conditions Characteristic Values ID, IR TVJ = TVJM; VR = VRRM; VD = VDRM < 5 VT IT < 1.65 V VT0 rT For power-loss calculations only 0.85 11 V m VGT VD = 6 V = 80 A; TVJ = 25C 10 mA TVJ = 25C TVJ = -40C TVJ = 25C TVJ = -40C < < < < 1.5 1.6 100 200 V V mA mA 1: IGT, TVJ = 125C 2: IGT, TVJ = 25C 3: IGT, TVJ = -40C V VG 3 2 1 6 5 1 IGT VD = 6 V VGD IGD TVJ = TVJM VD = 2/3 VDRM < < 0.2 5 V mA IL TVJ = 25C; tP = 10 s IG = 0.45 A; diG/dt = 0.45 A/s < 450 mA IH TVJ = 25C; VD = 6 V; RGK = < 200 mA 1 tgd TVJ = 25C; VD = 1/2VDRM IG = 0.45 A; diG/dt = 0.45 A/s < 2 s Fig. 1 Gate trigger characteristics tq TVJ = TVJM; IT = 20 A, tP = 200 s; di/dt = -10 A/s VR = 100 V; dv/dt = 15 V/s; VD = 2/3 VDRM typ. 150 s RthJC RthJK dS dA a 4 4: PGAV = 0.5 W 5: PGM = 5 W 6: PGM = 10 W IGD, TVJ = 125C 0.1 10 100 mA 1000 IG 1000 TVJ = 25C per thyristor; DC per module per thyristor; DC per module 0.92 0.23 1.22 0.31 K/W K/W K/W K/W Creeping distance on surface Creepage distance in air Max. allowable acceleration 12.7 9.4 50 mm mm m/s2 s tgd typ. 100 Limit 10 1 10 Dimensions in mm (1 mm = 0.0394") 100 IG mA 1000 Fig. 2 Gate trigger delay time G 300 80 A 70 TVJ = 125C A TK = 85C 250 IT IRMS 60 200 50 TVJ = 25C TVJ =125C 150 40 30 100 20 50 10 0 0.0 0.5 1.0 1.5 VT Fig. 3 Forward current vs. voltage drop per leg IXYS reserves the right to change limits, test conditions and dimensions (c) 2008 IXYS All rights reserved V 2.0 0 0.01 VW2x60 0.1 s 1 10 t Fig. 4 Rated RMS current vs. time (360 conduction) 20080828a 2-3 http://store.iiic.cc/ VW 2x60 500 200 W 180 50 Hz 80 % VRRM A 400 160 Ptot 140 RthKA K/W 0.2 0.5 1 1.5 2 3 5 120 100 80 ITSM 300 TVJ = 45C 200 60 TVJ = 125C Circuit W3C2 1x VW2x60 40 20 100 0 0 10 20 30 40 50 IRMS 60 A 0 25 50 75 100 TA 0 0.001 125 C 150 0.01 0.1 s 1 t Fig. 6 Surge overload current Fig. 5 Load current capability for two phase AC controller 10000 200 W 180 VR = 0V A2s 160 Ptot RthKA K/W 140 2 It 0.2 0.5 1 1.5 2 3 5 120 100 80 TVJ = 45C 1000 TVJ = 125C 60 Circuit B2C 2x VW2x60 40 20 100 0 0 10 20 30 40 50 60 A 0 ITAVM 25 50 75 100 TA t Fig. 7 Power dissipation vs. direct output current and ambient temperature cyclo converter, four quadrant operation Fig. 8 It vs, time (per thyristor) G 1.50 K/W 1.25 ZthJK Constants for ZthJK calculation: 30 Rthi / (K/W) ti / (s) DC 0.021 0.003 0.94 0.226 1.00 ms 10 1 125 C 150 45 A 40 ITAVM 0.003 0.022 0.191 0.45 DC 180 sin 120 60 30 35 30 25 0.75 0.50 0.25 0.00 0.001 0.01 0.1 RthJK for various conduction angles: 20 RthJK / (K/W) d: 15 1.22 1.27 1.3 1.35 1.37 DC 180 120 60 30 10 1 s t Fig. 9 Transient thermal impedance junction to heatsink (per thyristor) IXYS reserves the right to change limits, test conditions and dimensions (c) 2008 IXYS All rights reserved 5 0 10 0 25 50 75 100 125 C TC Fig. 10 Maximum forward current at case temperature 20080828a 3-3 http://store.iiic.cc/