Series T
PRODUCT SELECTION
Control Voltage 10A 25A
3-32 VDC TD1210 TD1225
90-280 VAC TA1210 TA1225
3-32 VDC TD2410 TD2425
90-280 VAC TA2410 TA2425
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [Vrms] 24-140 24-140 24-280 24-280
Transient Overvoltage [Vpk] 400 400 600 600
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 8 8 10 10
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 200 200 200 200
Maximum Load Current (3) [Arms] 10 25 10 25
Minimum Load Current [mArms] 40 40 40 40
Maximum Surge Current (16.6ms) [Apk] 120 250 120 250
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.6 1.6 1.6
Thermal Resistance Junction to Case (Rjc) [°C/W] 1.48 1.02 1.48 1.02
Maximum I2 t for Fusing (8.3 msec) [A2 sec] 60 260 60 260
Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 0.5
INPUT SPECIFICATIONS (1)
Description
Control Voltage Range 3-32 VDC 90-280 VAC
Minimum Turn-On Voltage 3.0 VDC 90 Vrms
Minimum Turn-Off Voltage 1.0 VDC 10 Vrms
Maximum Reverse Voltage -32 VDC -
Typical Input Current 3.4 mA @ 5 VDC, 20 mA @ 28 VDC 2 mA @ 120 Vrms, 4 mA @240 Vrms
Nominal Input Impedance 1500 Ohm 60 K Ohm
Maximum Turn-On Time [msec] 1/2 Cycle 10
Maximum Turn-Off Time [msec] 1/2 Cycle 40
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms
Minimum Insulation Resistance (@ 500 V DC) 109 Ohm
Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range -40 to 80°C
Ambient Storage Temperature Range -40 to 125 °C
Weight (typical) 3.0 oz (86.5g)
Encapsulation Thermally conductive Epoxy
Terminals Screws and Saddle Clamps Furnished, Unmounted
Recommended Terminal Screw Torque Range: 6-32 Screws - 10 in lbs. 8-32 Screws - 20 in. lbs. (Screws dry without grase)
MECHANICAL SPECIFICATIONS
THERMAL DERATE INFORMATION
AGENCY APPROVALS
ANNEX - ENVIROMENTAL INFORMATION
