KPCI-488LPA KUSB-488B IEEE-488 (GPIB) Interface Solutions * PCI and USB bus versions * IEEE-488.2 compatible for fast data transfer * Windows(R) 7/Vista/XP/2000 drivers included Ordering Information KPCI-488LPA IEEE-488.2 Interface Board for the PCI Bus KUSB-488B IEEE-488.2 USB-to-GPIB Interface Adapter for USB Port. Built in 2m (6.6 ft) cable Keithley's GPIB interface solutions make it easy to add standard IEEE-488.2 bus control to any PC system. These high speed tools can control as many as 14 GPIB instruments or other devices over a distance of up to 20 meters. They are ideal for use with automated test equipment in laboratory and industrial applications. applications or for other applications in which the computer has no available PCI plug-in board slots. The product is USB 2.0 compliant and has an IEEE data transfer rate upwards of 1.5 MB/s through the USB port. No external power is required. KUSB-488B has a built-in 2-meter USB cable. The Keithley Model KPCI-488LPA is a lowprofile, GPIB interface plug-in card that is 32-bit/33MHz PCI bus compatible. Its PCI interface supports both 3.3V and 5V PCI environments, making it suitable for most desktop computers and industrial PCs, including the new low-profile desktop systems. This low-cost solution supports Windows 7/Vista/XP/2000, and its driver library is command compatible with National InstrumentsTM and Capital Equipment CorporationTM command functions. Software The included utility software simplifies the setup and use of Keithley GPIB interface solutions and saves programming time. Every solution ships with 32-bit dynamic link libraries for Application Development Environments (ADEs) running under Windows 7/Vista/XP/2000 and drivers for the most c urrent programming languages. This adds up to full compatibility with a full array of software, including: * Microsoft Visual Studio 6.0 (Visual Basic, Visual C++) * Microsoft Visual Studio .NET (Visual Basic .NET, C#) * Microsoft Visual Studio 2005 and up * Borland Delphi, Borland C Builder 6.0 * LabVIEW Version 7.0 and up (VISA and IEEE-488.2) * LabWindowsTM/CVI Version 7.0 and up (VISA and IEEE-488.2) The Keithley Model KUSB-488B USB-to-GPIB interface turns any computer with a USB port into a fully functional GPIB controller. The KUSB-488B's small form factor makes it perfect for use with laptop computers in portable Bus/Form Factor Dimensions Power (Current @ 5VDC) Transfer Speed EMC Environmental KPCI-488LPA KUSB-488B PCI 4.7 x 2.5 in (120 x 64.5 mm) 400 mA typ., 750 mA max. 1.5 Mbyte/s European Directive 2004/108/EEC Operating: 0 to 55C, 10% to 90% RH non-condensing Storage: -20 to 80C, 5% to 90% RH non-condensing USB 3.2 x 2.6 x 1.1 in (81.7 x 66.1 x 27.8 mm) 500 mA 1.5 Mbyte/s European Directive 2004/108/EEC Operating: 0 to 55C, 10% to 90% RH non-condensing Storage: -20 to 80C, 5% to 95% RH non-condensing Hardware Compatibility These GPIB Interface solutions are fully compatible with all of Keithley's GPIB capable instruments. The Model 7010 adapter is required for the Model 428-PROG when used with the KUSB-488B. 1.888.KEITHLEY (U.S. only) www.keithley.com A Greater Measure of Confidence Add GPIB control to any PC * Compatible with any standard GPIB instrument ACCESSORIES Add GPIB control to any PC * LabVIEW(R) and LabWindows/CVI support