Metal Film Resistors, Military/Established Reliability,
MIL-PRF-39017 Qualified, Type RLR
ERL (Military RLR)
Vishay Dale
www.vishay.com For technical questions, contact: ff1aresistors@vishay.com Document Number: 31023
50 Revision: 30-Aug-06
FEATURES
•Meets requirements of MIL-PRF-39017
•Failure Rate: Verified Failure Rate (Contact factory for
current level)
•Epoxy coated construction provides superior moisture
protection
•Traceability of materials and processing
•Monthly lot acceptance testing
•Very low noise (- 40 dB)
•Extensive stocking program at distributors and factory in
± 1 % and ± 2 % tolerances
•Vishay Dale has complete capability to develope specific
reliability programs designed to customer requirements
1) Extended Resistance Range: DSCC has created a series of drawings intended to support extended resistance ranges left otherwise void by
the discontinuation of MIL-R-39008 RCR carbon composition resistors. Vishay Dale is listed as a resource on these drawings as follows:
These drawings can be viewed at: www.dscc.dla.mil/Programs/MilSpec/ListDwgs.asp?DocType=DSCCdwg
* Hot solder dipped leads
** Consult Factory for current QPL failure rates
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY
DALE
MODEL
MIL-PRF-39017
STYLE
POWER
RATING
P70 °C, W
RESISTANCE
RANGE1)
Ω
RESISTANCE
TOLERANCE
%
TEMPERATURE
COEFFICIENT
ppm/°C
MAXIMUM
WORKING
VOLTAGE
LIFE
FAILURE
RATE**
ERL05 RLR05 0.125 4R7 - 1M0 ± 1, ± 2 100 200 M, P, R, S
ERL07 RLR07 0.25 1R0 - 10M ± 1, ± 2 100 250 M, P, R, S
ERL20 RLR20 0.50 4R3 - 3M01 ± 1, ± 2 100 350 M, P, R
ERL32 RLR32 1.0 1R0 - 2M7 ± 1, ± 2 100 500 M, P, R
DSCC
DRAWING
NUMBER
VISHAY
DALE
MODEL
POWER RATING
P70 °C
W
RESISTANCE
RANGE
Ω
RESISTANCE
TOLERANCE
%
TEMPERATURE
COEFFICIENT
ppm/°C
MAXIMUM
WORKING
VOLTAGE
98020 ERL05..36, ERL05..37* 0.125 1M1 - 22M ± 2, ± 5, ± 10 350 200
99011 ERL07..100, ERL07..101* 0.25 11M - 22M ± 2, ± 5, ± 10 350 250
98021 ERL20..36, ERL20..37* 0.50 3M3 - 22M ± 2, ± 5, ± 10 350 350
98022 ERL32..36, ERL32..37* 1.0 3M0 - 22M ± 2, ± 5, ± 10 350 350
97004 ERL62..1, ERL62..2* 2.0 10R - 2M7
3M0 - 22M ± 1, ± 2, ± 5, ± 10 100
350 500
TECHNICAL SPECIFICATIONS
PARAMETER UNIT CONDITION
Voltage Coefficient, max. ppm/°C 5/Volt when measured between 10 % and full rated voltage
Dielectric Strength VAC RLR05 = 300; RLR07 and RLR20 = 500; RLR32 = 1000
Insulations Resistance Ω≥ 109 minimum dry; ≥ 1011 minimum after moisture test
Operating Temperature Range °C - 65/+ 150
Terminal Strength lb 2lb pull test on RLR05; 5lb pull test on all other sizes
Solderability Continuous satisfactory coverage when tested in accordance with MIL-STD-202, Method 208
Weight g RLR05 = 0.11; RLR07 = 0.35; RLR20 = 0.75; RLR32 = 1.50
GLOBAL PART NUMBER INFORMATION
TOLERANCE
CODE
FAILURE
RATE
RLR05 F = ± 1 %M = 1.0 %/1000 h B14 = Tin/Lead, Bulk
RLR07 G = ± 2 %P = 0.1 %/1000 h
RLR20 by a multiplier R = 0.01 %/1000 h
00R1 = 1.0 Ω S = 0.001 %/1000 h
3302 = 33 k Ω as applicable
1005 = 10 M
Ω
New Global Part Numbering: RLR07C3001FRR36 (preferred part numbering format)
RLR07C300 1FRR36
Historical Part Number example: RLR07C3001FR (will continue to be accepted)
RLR07 C 3001 F R R36
MIL STYLE LEAD MATERIAL RESISTANCE VALUE TOLERANCE CODE FAILURE RATE PACKAGING
R36 = Tin/Lead,
T/R (Full, except 32’s)
R64 = Tin/Lead,
T/R (Full; 32’s only)
RE6 = Tin/Lead,
T/R (1000 pcs)
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1-999
1 = Hot Solder Dip (32’s)
11 = Hot Solder Dip (20’s)
19 = Hot Solder Dip (05’s)
23 = Hot Solder Dip (07’s)
= Solderable/ 3 digit significant
C
RESISTANCE
VALUE
figure, followed
MIL STYLE LEAD MA LAIRET
PACKAGINGSPECIAL
RLR32
Weldable
ERL (Military RLR)
Metal Film Resistors, Military/Established Reliability
MIL-PRF-39017 Qualified, Type RLR Vishay Dale
Document Number: 31023 For technical questions, contact: ff1aresistors@vishay.com www.vishay.com
Revision: 30-Aug-06 51
DIMENSIONS in inches [millimeters]
VISHAY DALE
MODEL ABC
(Max.) DE
ERL05 0.150 ± 0.020
[3.81 ± 0.51]
0.066 ± 0.008
[1.68 ± 0.21]
0.187
[4.75]
0.016 ± 0.002
[0.41 ± 0.05]
1.25 ± 0.266
[31.75 ± 6.76]
ERL07 0.250 ± 0.031 - 0.046
[6.35 ± 0.79 - 1.17]
0.090 ± 0.008
[2.29 ± 0.21]
0.300
[7.62]
0.025 ± 0.002
[0.64 ± 0.05]
1.50 ± 0.125
[38.10 ± 3.18]
ERL20 0.375 ± 0.041
[9.53 ± 1.04]
0.138 ± 0.023
[3.51 ± 0.58]
0.450
[11.43]
0.032 ± 0.002
[0.81 ± 0.05]
1.50 ± 0.125
{38.10 ± 3.18]
ERL32 0.562 ± 0.031
[14.27 ± 0.79]
0.190 ± 0.015
[4.83 ± 0.38]
0.625
[15.87]
0.032 + 0.002 - 0.001
[0.81 + 0.05 - 0.03]
1.50 ± 0.125
[38.10 ± 3.18]
ERL62 0.562 + 0.031 - 0.042
[14.27 + 0.79 - 1.07]
0.230 ± 0.015
[5.84 ± 0.38]
0.650
[16.51]
0.032 + 0.002 - 0.001
[0.81 + 0.05 - 0.03]
1.50 ± 0.125
[38.10 ± 3.18]
B
D
C
Max.
EA
* 1.08 ± 0.125 [27.43 ± 3.18] IF TAPE AND REEL
MATERIAL SPECIFICATIONS
Element: Vacuum-deposited nickel-chrome alloy Encapsulation: Specially formulated epoxy compound
Core: Fire-cleaned high purity ceramic Termination:
Standard lead material is solder-coated copper
Solderable and weldable per MIL-STD-1276,
Type C.
APPLICABLE MIL-SPECIFICATIONS
MIL-PRF-39017:
The ERL series meets the electrical, environmental and
dimensional requirements of MIL-PRF-39017.
MIL-PRF-22684:
MIL-PRF-39017 supercedes MIL-PRF-22684 on new designs.
The ERC series meet or exceed MIL-PRF-22684 requirements.
Documentation:
Qualification and failure rate verfication test data is maintained by
Vishay Dale and is available upon request. Lot traceability and
identification data is maintained by Vishay Dale for five years.
CAGE CODE: 91637
POWER RATING
Power ratings are based on the following two conditions:
1. ± 2.0 % maximum R in 2000 hours load life
2. + 150 °C maximum operating temperature
MARKING
- Per MIL-PRF-39017
AMBIENT TEMPERATURE IN °C
DERATING
%
NI REW
OP DETAR
70
0
20
40
60
80
100
120
- 65 - 50 - 25 0 25 50 75 100 125 150 175 200
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
