Two Chip TO-220 AC Series SIDACtor Data Book Two Chip TO-220 AC Series The two chip TO-220 AC series SIDACtor is a 500A rated solid state protection device designed for telecommunications applications that reference Tip and Ring to earth ground but do not require balanced protection. Applications include xDSL transmission equipment, line cards, etc. The AC series SIDACtor is used to help equipment meet various regulatory requirements including: Belicore 1089, ITU K.20 & K.21, IEC 950, UL 1459 & 1950 and FCC Part 68 without the use of any additional series impedance. Electrical Parameters Part | ed Vs vr | tom | ts | ot & posozac| 25 | 40. +~| +SO | 80 | 5 5 | soo | 1 | 150 | 200 P1402AC 5B 77 116 14 | 5 |S 800 1 150 | 120 P1602AC 65 95 430 wo | 5 | 5 800 1 150 | 120 P2202AC 90 430 180 2o | 5 | 5 800 1 150 | 120 P2702AC| 120 160 240 320 | 5 5 800 1 150 | 80 P3002AC| 140 180 280 360 | 5 5 800 1 150 | 80 P3602AC| 160 220 320 440 | 5 5 800 1 150 | 80 P4202AC | __ 190 260 380 500 | 5 5 800 1 150 | 60 p4s02ac] 220 300 440 6oo | 5 | 5 800 1 150 | 60 PE002AC| 275 360 550 700 | 5 | 5 800 1 150 | 60 Notes: * All measurements are made at an ambient temperature of 25C. * Listed SIDACtors are bi-directional. All electrical parameters & surge ratings apply to forward and reverse polarities. * Vora is measured at lony, * Vg is measured at 100V/us. + Special voltage (Vg & Vorq) and holding current (|,,) requirements are available upon request. + Off-state capacitance is measured at 1MHz with a 2 volt bias and is a typical value. Surge Ratings fo le | tee pe atlet vies Amps Amps Se AC 200 100 500 1 - 20 Teccor Electronics, Inc. (972) 580-7777SIDACtor Data Book Two Chip TO-220 AC Series Thermal Considerations Series |. Symbol | | Parameter Value | Unit T; Junction Temperature Range -40to+150 | C a Ts Storage Temperature Range -65 to +150 C a AC Ty, Maximum Case Temperature +115 C = Reic Thermal Resistance: junction to case +12 CW id Roja Thermal Resistance: junction to ambient +50 CAN V-I Characteristics t-xty Pulse Wave-form +t A a : t, = rise time to peak value oi = Peak | ty = decay time to half value * 100 L Waiue ie ce fea no a wee ee tte: a Is L ieee = hor | | i 3 { bli. i ' Vi< PRM L | i > +V 8 Q [wows : < Half Value - t tf < Vr VDRM 8 : Vs & gq Wwe t, ty 0 . t - Time (ys) v - Normalized Vg Change vs. Normalized DC Holding Current vs. Junction Temperature Case Temperature x S g Z 2 xu o = 2 _ 3 6 = 2 8 e e ' 1 -40 -20 0 20 40 60 80100120140 160 Case Temperature (Tc) - C -40 -20 0 20 40 60 80100120140 160 Junction Temperature (T,) - C Teccor Electronics, Inc. 1-21 (972) 580-7777