MK2302S-01 Multiplier and Zero Delay Buffer Description Features The MK2302S-01is a high performance Zero Delay Buffer (ZDB) which integrates ICS' proprietary analog/digital Phase Locked Loop (PLL) techniques. The chip is part of ICS' ClockBlocksTM family and was designed as a performance upgrade to meet today's higher speed and lower voltage requirements. The zero delay feature means that the rising edge of the input clock aligns with the rising edges of both output clocks, giving the appearance of no delay through the device. There are two outputs on the chip, one being a low-skew divide by two of the other output. * * * * * The MK2302S-01 is ideal for synchronizing outputs in a large variety of systems, from personal computers to data communications to graphics/video. By allowing off-chip feedback paths, the device can eliminate the delay through other devices. * * * * * * * 8 pin SOIC package Low input to output skew of 250ps max Absolute jitter 500ps Propagation Delay 350ps Ability to choose between different multipliers from 0.5X to 16X Output clock frequency up to 133 MHz at 3.3V Can recover degraded input clock duty cycle Output clock duty cycle of 45/55 Full CMOS clock swings with 25mA drive capability at TTL levels Advanced, low power CMOS process Operating voltage of 3.3V or 5V Industrial temperature version available Block Diagram IC L K S 1 :0 F B IN d ivid e by N P h a se D e te cto r, C h a rg e Pum p, and Loop F ilte r VCO C LK1 /2 C LK2 E x te rn a l fe e d b a ck c a n co m e fro m C L K 1 o r C L K 2 (se e ta b le o n p a g e 2 ) MDS 2302S-01 B 1 Revision 070803 Integrated Circuit Systems, Inc. 525 Race Street, San Jose, CA 95126 tel (408) 295-9800 www.icst.com MK2302S-01 Multiplier and Zero Delay Buffer Pin Assignment FBIN 1 8 CLK2 ICLK 2 7 VDD GND 3 6 CLK1 S0 4 5 S1 8 pin (150 mil) SOIC Clock Multiplier Decoding Table 1 (Multiplies Input clock by shown amount) FBIN S1 S0 CLK1 CLK2 CLK1 0 0 2 X ICLK ICLK CLK1 0 1 4 X ICLK 2 X ICLK CLK1 1 0 ICLK ICLK/2 CLK1 1 1 8 X ICLK 4 X ICLK CLK2 0 0 4 X ICLK 2 X ICLK CLK2 0 1 8 X ICLK 4 X ICLK CLK2 1 0 2 X ICLK ICLK CLK2 1 1 16 X ICLK 8 XICLK Pin Descriptions Pin Number Pin Name Pin Type 1 FBIN Input Feedback clock input. 2 ICLK Input Reference clock input. 3 GND Power Connect to ground. 4 S0 Input Select 0 for output clock per decoding table above. Pull-up. Select 1 for output clock per decoding table above. Pull up. 5 S1 Input 6 CLK1 Output Pin Description Clock output per table above. 7 VDD Power Connect to +3.3V or +5.0V. 8 CLK2 Output Clock output per table above. Low skew divide by two of pin 6 clock. MDS 2302S-01 B 2 Revision 070803 Integrated Circuit Systems, Inc. 525 Race Street, San Jose, CA 95126 tel (408) 295-9800 www.icst.com MK2302S-01 Multiplier and Zero Delay Buffer External Components The MK2302S-01 requires a 0.01F decoupling capacitor to be connected between VDD and GND. It must be connected close to the part to minimize lead inductance. No external power supply filtering is required for this device. A 33W series terminating resistor can be used next to each output pin. Using CLK1 as the feedback will always result in synchronized rising edges between ICLK and CLK1. However, the CLK2 could be a falling edge compared with ICLK. ICS recommends using CLK2 feedback whenever possible. This will synchronize the rising edges of all three clocks. Absolute Maximum Ratings Stresses above the ratings listed below can cause permanent damage to the MK2302S-01. These ratings, which are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the recommended operating temperature range. Item Rating Supply Voltage, VDD 7V All Inputs and Outputs -0.5V to VDD+0.5V Ambient Operating Temperature -55 to 125C Storage Temperature -65 to +150C Junction Temperature 175C Power Dissipation 0.5W Recommended Operation Conditions Parameter Min. Max. Units 0 +70 C Ambient Operating Temperature, Industrial -40 +85 C Power Supply Voltage (measured in respect to GND) +4.5 +5.0 +5.5 V Power Supply Voltage (measured in respect to GND) +3.15 +3.3 +3.45 V Ambient Operating Temperature, Commercial MDS 2302S-01 B 3 Typ. Revision 070803 Integrated Circuit Systems, Inc. 525 Race Street, San Jose, CA 95126 tel (408) 295-9800 www.icst.com MK2302S-01 Multiplier and Zero Delay Buffer DC Electrical Characteristics VDD = 3.3V 5%, Ambient Temperature 0 to +70C or -40C to 85C Parameter Symbol Conditions Min. Typ. 3.15 Max. Units 3.45 V Operating Voltage VDD Operating Current IDD Input High Voltage VIH ICLK, FBIN Input Low Voltage VIL ICLK, FBIN Input High Voltage VIH S0, S1 Input Low Voltage (mid-level) VIM S0, S1 Input Low Voltage VIL S0, S1 Output High Voltage (CMOS High) VOH IOH = -4 mA VDD-0.4 V Output High Voltage VOH IOH = -12 mA 2.4 V Output Low Voltage VOL IOL = 12mA Short Circuit Current IOS Each output Input Capacitance CIN S0, S1 20 ma 2 V 0.8 VDD-0.5 V V VDD/2 V 0.5 0.4 V V 70 mA 5 pF VDD = 5V 10%, Ambient Temperature 0 to +70C or -40C to 85C Parameter Symbol Conditions Typ. 4.5 Max. Units 5.5 V Operating Voltage VDD Operating Current IDD Input High Voltage VIH ICLK, FBIN Input Low Voltage VIL ICLK, FBIN Input High Voltage VIH S0, S1 Input Low Voltage (mid-level) VIM S0, S1 Input Low Voltage VIL S0, S1 Output High Voltage (CMOS High) VOH IOH = -4 mA VDD-0.4 V Output High Voltage VOH IOH = -12 mA 2.4 V Output Low Voltage VOL IOL = 12mA Short Circuit Current IOS Each output Input Capacitance CIN S0, S1 MDS 2302S-01 B 5V Min. 30 4 ma 2 V 0.8 VDD-0.5 V V VDD/2 V 0.5 0.4 V V 100 mA 5 pF Revision 070803 Integrated Circuit Systems, Inc. 525 Race Street, San Jose, CA 95126 tel (408) 295-9800 www.icst.com MK2302S-01 Multiplier and Zero Delay Buffer AC Electrical Characteristics VDD = 3.3V or 5V 5%, Ambient Temperature 0 to +70 C or -40C to 85C Parameter Symbol Conditions Input Frequency, ICLK FBIN from CLK/2 Output Clock Frequency CLK1 Min. Typ. Max. Units See table on page 2 10 Output to Output Skew 100 168 MHz 175 ps 200 ps Input to Output Jitter 40 - 150 MHz Input Skew, ICLK to FBIN, CLK>30MHz, Note 1 -300 300 ps ICLK to FBIN, CLK<30MHz, Note 1 -600 600 ps Output Clock Rise Time 0.8 to 2.0V, Note 2 0.8 1 ns Output Clock Fall Time 2.0 to 0.8V, Note 2 0.8 1 ns Output Clock Duty Cycle at VDD/2 49 - 51 60 % 40 Note 1: Assumes clocks with same rise time, measured from rising edges at VDD/2 Note 2: Measured with 27W terminating resistor and 15pF loads Thermal Characteristics Parameter Symbol Conditions Min. Typ. Max. Units Thermal Resistance Junction to Ambient qJA Still air 150 C/W qJA 1 m/s air flow 140 C/W qJA 3 m/s air flow 120 C/W Thermal Resistance Junction to Case qJC 40 C/W MDS 2302S-01 B 5 Revision 070803 Integrated Circuit Systems, Inc. 525 Race Street, San Jose, CA 95126 tel (408) 295-9800 www.icst.com MK2302S-01 Multiplier and Zero Delay Buffer Package Outline and Package Dimensions (8 pin SOIC, 150 Mil. Body) Package dimensions are kept current with JEDEC Publication No. 95 8 E Symbol A A1 B C D E e H h L a H INDEX AREA 1 2 D A Millimeters Inches Min Max 1.35 1.75 0.10 0.25 0.33 0.51 0.19 0.25 4.80 5.00 3.80 4.00 1.27 BASIC 5.80 6.20 0.25 0.50 0.40 1.27 0 8 Min Max .0532 .0688 .0040 .0098 .013 .020 .0075 .0098 .1890 .1968 .1497 .1574 0.050 BASIC .2284 .2440 .010 .020 .016 .050 0 8 h x 45 A1 C -Ce B SEATING PLANE L .10 (.004) C Ordering Information Part / Order Number Marking (for both) MK2302S-01 MK2302S-01T MK2302S-01I MK2302S-01IT Shipping Pkg Package Temperature Tubes Tape and Reel Tubes Tape and Reel 8 pin SOIC 8 pin SOIC 8 pin SOIC 8 pin SOIC 0 to +70 C 0 to +70 C -40 to 85 C -40 to 85 C MK2302S-01 MK2302S-01 MK2302S-01I MK2302S-01I While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems (ICS) assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or critical medical instruments. MDS 2302S-01 B 6 Revision 070803 Integrated Circuit Systems, Inc. 525 Race Street, San Jose, CA 95126 tel (408) 295-9800 www.icst.com