Dipped Radial Capacitors Wire Form Outline SOLID TANTALUM RESIN DIPPED TAP/TEP Preferred Wire Forms D Figure 1 D Figure 2 D Figure 3 H H1 + 4 (0.16) max + 2.0(0.08) max H1 + L L S L S S d d 2.0 (0.079) min Wire Form C 2 (0.079) min d Wire Form B Wire Form S Non-Preferred Wire Forms (Not recommended for new designs) Figure 4 Figure 5 D Figure 6 D D H1 max +0.118 (3.0) H + 3.8 (0.15) max + 0.079 (2) min L 1.10 +0.25 -0.10 L L S (0.4 +0.010 -0.004 ) H S d d S Wire Form F Wire Form D Wire Form G DIMENSIONS Wire Form Figure millimeters (inches) Case Size L (see note 1) S d Packaging Suffixes Available* Preferred Wire Forms C Figure 1 A - R* 16.04.00 (0.6300.160) 5.001.00 (0.2000.040) 0.500.05 (0.0200.002) CCS CRW CRS Bulk Tape/Reel Tape/Ammo B Figure 2 A - J* 16.04.00 (0.6300.160) 5.001.00 (0.2000.040) 0.500.05 (0.0200.002) BRW BRS Tape/Reel Tape/Ammo S Figure 3 A - J* 16.04.00 (0.6300.160) 2.500.50 (0.1000.020) 0.500.05 (0.0200.002) SCS SRW SRS Bulk Tape/Reel Tape/Ammo Non-Preferred Wire Forms (Not recommended for new designs) F Figure 4 A-R 3.900.75 (0.1550.030) 5.000.50 (0.2000.020) 0.500.05 (0.0200.002) FCS Bulk D Figure 5 A - H* 16.04.00 (0.6300.160) 2.500.75 (0.1000.020) 0.500.05 (0.0200.002) DCS DTW DTS Bulk Tape/Reel Tape/Ammo G Figure 6 A-J A-R 0.500.05 (0.0200.002) 0.500.05 (0.0200.002) Bulk Similar to Figure 1 3.180.50 (0.1250.020) 6.351.00 (0.2500.040) GSB H 16.04.00 (0.6300.160) 16.04.00 (0.6300.160) HSB Bulk Notes: (1) Lead lengths can be supplied to tolerances other than those above and should be specified in the ordering information. (2) For D, H, and H1 dimensions, refer to individual product on following pages. * For case size availability in tape and reel, please refer to pages 101-102. 94 Dipped Radial Capacitors TAP Series SOLID TANTALUM RESIN DIPPED CAPACITORS TAP is a professional grade device manufactured with a flame retardant coating and featuring low leakage current and impedance, very small physical sizes and exceptional temperature stability. It is designed and conditioned to operate to +125C (see page 132 for voltage derating above 85C) and is available loose or taped and reeled for auto insertion. The 15 case sizes with wide capacitance and working voltage ranges means the TAP can accommodate almost any application. MAXIMUM CASE DIMENSIONS: millimeters (inches) + D H HOW TO ORDER TAP Type LEAD-FREE COMPATIBLE COMPONENT Wire Case A B C D E F G H J K L M N P R C, F, G, H H 8.50 (0.330) 9.00 (0.350) 10.0 (0.390) 10.5 (0.410) 10.5 (0.410) 11.5 (0.450) 11.5 (0.450) 12.0 (0.470) 13.0 (0.510) 14.0 (0.550) 14.0 (0.550) 14.5 (0.570) 16.0 (0.630) 17.0 (0.670) 18.5 (0.730) B, S, D *H1 7.00 (0.280) 7.50 (0.300) 8.50 (0.330) 9.00 (0.350) 9.00 (0.350) 10.0 (0.390) 10.0 (0.390) 10.5 (0.410) 11.5 (0.450) 12.5 (0.490) 12.5 (0.490) 13.0 (0.510) 4.50 4.50 5.00 5.00 5.50 6.00 6.50 7.00 8.00 8.50 9.00 9.00 9.00 10.0 10.0 D (0.180) (0.180) (0.200) (0.200) (0.220) (0.240) (0.260) (0.280) (0.310) (0.330) (0.350) (0.350) (0.350) (0.390) (0.390) 475 M 035 SCS Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Capacitance Tolerance K = 10% M = 20% (For J = 5% tolerance, please consult factory) Rated DC Voltage Suffix indicating wire form and packaging (see page 94) 95 Dipped Radial Capacitors TAP Series TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Rated Voltage DC (VR ) Category Voltage (VC ) Surge Voltage (VS ) Surge Voltage (VS ) Temperature Range: Environmental Classification: Dissipation Factor: +85C: +125C: +85C: +125C: Reliability: Qualification: Capacitance Range (letter denotes case size) Capacitance Rated voltage DC (VR ) F Code 6.3V 10V 0.10 104 0.15 154 0.22 224 0.33 0.47 0.68 334 474 684 1.0 1.5 2.2 105 155 225 3.3 4.7 6.8 335 475 685 A A A 10 15 22 106 156 226 33 47 68 All technical data relate to an ambient temperature of +25C 0.10 F to 330 F 20%; 10% (5% consult your AVX representative for details) 6.3 10 16 20 25 35 50 4 6.3 10 13 16 23 33 8 13 20 26 33 46 65 5 9 12 16 21 28 40 -55C to +125C 55/125/56 (IEC 68-2) 0.04 for CR 0.1-1.5F 0.06 for CR 2.2-6.8F 0.08 for CR 10-68F 0.10 for CR 100-330F 1% per 1000 hrs. at 85C with 0.1/V series impedance, 60% confidence level. CECC 30201 - 032 16V 20V 25V 35V A A A 50V A A A A A A A A B A A A A A A A A A A A B C D E A A B A B C B C D B C D C E F F G H B C D C D E D E F E F H E F H F H K J K L 336 476 686 E F G F G H F J L J K N J M N M N 100 150 220 107 157 227 H K M K N P N N R N 330 337 P R Values outside this standard range may be available on request. AVX reserves the right to supply capacitors to a higher voltage rating, in the same case size, than that ordered. MARKING Polarity, capacitance, rated DC voltage, and an "A" (AVX logo) are laser marked on the capacitor body which is made of flame retardant gold epoxy resin with a limiting oxygen index in excess of 30 (ASTM-D-2863). * * * * Polarity Capacitance Voltage AVX logo 96 * Tolerance code: 20% = Standard (no marking) 10% = "K" on reverse side of unit 5% = "J" on reverse side of unit +A 10 16 Dipped Radial Capacitors TAP Series RATINGS AND PART NUMBER REFERENCE AVX Part No. Case Size Capacitance F DCL (A) Max. DF % Max. ESR Max. () @ 100 kHz AVX Part No. 13.0 10.0 8.0 6.0 5.0 3.7 3.0 2.0 1.8 1.6 0.9 0.9 0.7 TAP 336(*)020 TAP 476(*)020 TAP 686(*)020 TAP 107(*)020 A A A B C D E F G H K M P 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 0.5 0.5 0.5 0.5 0.8 1.1 1.7 2.4 3.4 5.0 7.6 11.0 16.6 6 6 6 8 8 8 8 8 8 10 10 10 10 10 volt @ 85C (6.3 volt @ 125C) TAP 225(*)010 TAP 335(*)010 TAP 475(*)010 TAP 685(*)010 TAP 106(*)010 TAP 156(*)010 TAP 226(*)010 TAP 336(*)010 TAP 476(*)010 TAP 686(*)010 TAP 107(*)010 TAP 157(*)010 TAP 227(*)010 TAP 337(*)010 A A A B C D E F G H K N P R 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 0.5 0.5 0.5 0.5 0.8 1.2 1.7 2.6 3.7 5.4 8.0 12.0 17.6 20.0 6 6 6 6 8 8 8 8 8 8 10 10 10 10 13.0 10.0 8.0 6.0 5.0 3.7 2.7 2.1 1.7 1.3 1.0 0.8 0.6 0.5 16 volt @ 85C (10 volt @ 125C) TAP 155(*)016 TAP 225(*)016 TAP 335(*)016 TAP 475(*)016 TAP 685(*)016 TAP 106(*)016 TAP 156(*)016 TAP 226(*)016 TAP 336(*)016 TAP 476(*)016 TAP 686(*)016 TAP 107(*)016 TAP 157(*)016 TAP 227(*)016 A A A B C D E F F J L N N R 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 0.5 0.5 0.5 0.6 0.8 1.2 1.9 2.8 4.2 6.0 8.7 12.8 19.2 20.0 4 6 6 6 6 8 8 8 8 8 8 10 10 10 10.0 8.0 6.0 5.0 4.0 3.2 2.5 2.0 1.6 1.3 1.0 0.8 0.6 0.5 20 volt @ 85C (13 volt @ 125C) TAP 105(*)020 TAP 155(*)020 TAP 225(*)020 TAP 335(*)020 TAP 475(*)020 TAP 685(*)020 TAP 106(*)020 TAP 156(*)020 TAP 226(*)020 A A A B C D E F H 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 0.5 0.5 0.5 0.5 0.7 1.0 1.6 2.4 3.5 4 4 6 6 6 6 8 8 8 Capacitance F DCL (A) Max. DF % Max. ESR Max. () @ 100 kHz 20 volt @ 85C (13 volt @ 125C) continued 6.3 volt @ 85C (4 volt @ 125C) TAP 335(*)006 TAP 475(*)006 TAP 685(*)006 TAP 106(*)006 TAP 156(*)006 TAP 226(*)006 TAP 336(*)006 TAP 476(*)006 TAP 686(*)006 TAP 107(*)006 TAP 157(*)006 TAP 227(*)006 TAP 337(*)006 Case Size 10.0 9.0 7.0 5.5 4.5 3.6 2.9 2.3 1.8 J K N N 33 47 68 100 5.2 7.5 10.8 16.0 8 8 8 10 1.4 1.2 0.9 0.6 25 volt @ 85C (16 volt @ 125C) TAP 105(*)025 TAP 155(*)025 TAP 225(*)025 TAP 335(*)025 TAP 475(*)025 TAP 685(*)025 TAP 106(*)025 TAP 156(*)025 TAP 226(*)025 TAP 336(*)025 TAP 476(*)025 TAP 686(*)025 A A A B C D E F H J M N 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 0.5 0.5 0.5 0.6 0.9 1.3 2.0 3.0 4.4 6.6 9.4 13.6 4 4 6 6 6 6 8 8 8 8 8 8 10.0 8.0 6.0 5.0 4.0 3.1 2.5 2.0 1.5 1.2 1.0 0.8 35 volt @ 85C (23 volt @ 125C) TAP 104(*)035 TAP 154(*)035 TAP 224(*)035 TAP 334(*)035 TAP 474(*)035 TAP 684(*)035 TAP 105(*)035 TAP 155(*)035 TAP 225(*)035 TAP 335(*)035 TAP 475(*)035 TAP 685(*)035 TAP 106(*)035 TAP 156(*)035 TAP 226(*)035 TAP 336(*)035 TAP 476(*)035 A A A A A A A A B C E F F H K M N 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.9 1.3 1.9 2.8 4.2 6.1 9.2 10.0 4 4 4 4 4 4 4 4 6 6 6 6 8 8 8 8 8 26.0 21.0 17.0 15.0 13.0 10.0 8.0 6.0 5.0 4.0 3.0 2.5 2.0 1.6 1.3 1.0 0.8 50 volt @ 85C (33 volt @ 125C) TAP 104(*)050 TAP 154(*)050 TAP 224(*)050 TAP 334(*)050 TAP 474(*)050 TAP 684(*)050 TAP 105(*)050 TAP 155(*)050 TAP 225(*)050 TAP 335(*)050 TAP 475(*)050 TAP 685(*)050 TAP 106(*)050 TAP 156(*)050 TAP 226(*)050 A A A A A B C D E F G H J K L 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.8 1.3 1.8 2.7 4.0 6.0 8.8 4 4 4 4 4 4 4 4 6 6 6 6 8 8 8 26.0 21.0 17.0 15.0 13.0 10.0 8.0 6.0 3.5 3.0 2.5 2.0 1.6 1.2 1.0 (*) Insert capacitance tolerance code; M for 20%, K for 10% and J for 5% NOTE: Voltage ratings are minimum values. AVX reserves the right to supply higher voltage ratings in the same case size. 97 Dipped Radial Capacitors Tape and Reel Packaging SOLID TANTALUM RESIN DIPPED TAP/TEP TAPE AND REEL PACKAGING FOR AUTOMATIC COMPONENT INSERTION TAP/TEP types are all offered on radial tape, in reel or `ammo' pack format for use on high speed radial automatic insertion equipment, or preforming machines. The tape format is compatible with EIA 468A standard for component taping set out by major manufacturers of radial automatic insertion equipment. TAP/TEP - available in three formats. See page 101 for dimensions. P P2 h `B' wires for normal automatic insertion on 5mm pitch. BRW suffix for reel BRS suffix for `ammo' pack Available in case sizes A - J H3 W2 d H L H1 W1 S W D P1 T P P P2 h `C' wires for preforming. H3 L CRW suffix for reel CRS suffix for `ammo' pack W2 d H H1 W1 S W Available in case sizes A - R D P1 T P P P2 h `S' and `D' wire for special applications, automatic insertion on 2.5mm pitch. H3 W2 d H2 L H1 W1 S SRW, DTW suffix for reel SRS, DTS suffix for `ammo' pack Available in case sizes A - J W D T P1 P S wire 101 Dipped Radial Capacitors Tape and Reel Packaging SOLID TANTALUM RESIN DIPPED TAP/TEP CASE DIMENSIONS: millimeters (inches) Description Code Dimension Feed hole pitch P 12.7 0.30 (0.500 0.010) Hole center to lead P1 3.85 0.70 (0.150 0.030) to be measured at bottom of clench REEL CONFIGURATION AND DIMENSIONS: millimeters (inches) Diameter 30 (1.18) max. 5.05 1.00 (0.200 0.040) for S wire Hole center to component center P2 6.35 0.40 (0.250 0.020) Change in pitch p 1.00 ( 0.040) 53 (2.09) max. Lead diameter d 0.50 0.05 (0.020 0.003) Lead spacing S See wire form table Component alignment h 0 2.00 (0 0.080) Feed hole diameter D 4.00 0.20 (0.150 0.008) Tape width W 18.0 + 1.00 (0.700 + 0.040) - 0.50 - 0.020) Hold down tape width W1 6.00 (0.240) min. Hold down tape position W2 1.00 (0.040) max. Lead wire clench height H 16.0 0.50 (0.630 0.020) 19.0 1.00 (0.750 0.040) on request Hole position H1 9.00 0.50 (0.350 0.020) Base of component height H2 18.0 (0.700) min. (S wire only) Component height H3 32.25 (1.300) max. Length of snipped lead L 11.0 (0.430) max. Total tape thickness T 0.70 0.20 (0.030 0.001) 45 (1.77) max. 40 (1.57) min. 80 (3.15) 360 (14.17) max. Manufactured from cardboard with plastic hub. cardboard with plastic hub. Holding tape outside Holding tape outside. Positive terminal leading. Carrying card 0.50 0.10 (0.020 0.005) PACKAGING QUANTITIES For Reels Style Case size A TAP TEP No. of pieces Style 1500 B, C, D 1250 E, F 1000 G, H, J 750 K, L, M, N, P, R 500 TAP TEP Case size No. of pieces A, B, C, D 3000 E, F, G 2500 H, J 2000 K, L, M, N, P, R 1000 AMMO PACK DIMENSIONS millimeters (inches) max. Height 360 (14.17), width 360 (14.17), thickness 60 (2.36) 102 For bulk products For `Ammo' pack Style TAP TEP Case size No. of pieces A to H 1000 J to L 500 M to R 100 GENERAL NOTES Resin dipped tantalum capacitors are only available taped in the range of case sizes and in the modular quantities by case size as indicated. Packaging quantities on tape may vary by 1%.