SBR2040CT SBR2040CTFP 20A SBR(R) SUPER BARRIER RECTIFIER Please click here to visit our online spice models database. Features Mechanical Data * * * * * * * * Low Forward Voltage Drop Excellent High Temperature Stability Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability Lead Free Finish, RoHS Compliant (Note 2) Also Available in Green Molding Compound (Note 4) TO-220AB Top View Case: TO-220AB, ITO-220AB Case Material: Molded Plastic, UL Flammability Classification Rating 94V-0 Terminals: Matte Tin Finish annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 2 Ordering Information: See Page 2 Weight: TO-220AB - 1.85 grams (approximate) ITO-220AB - 1.65 grams (approximate) * * * * ITO-220AB Top View TO-220AB Bottom View ITO-220AB Bottom View Package Pin Out Configuration Maximum Ratings (Per Leg) @TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Output Current Per Device Symbol VRRM VRWM VRM Value Unit 40 V IO 20 A IFSM 120 A IRRM 2 A VAC 2000 V (Per Leg) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Peak Repetitive Reverse Surge Current (2uS-1Khz) Isolation Voltage (ITO-220AB Only) From terminal to heatsink t = 3 sec. Thermal Characteristics (Per Leg) Characteristic Typical Thermal Resistance Package = TO-220AB Package = ITO-220AB Operating and Storage Temperature Range Symbol Value Unit RJC 2 4 -65 to +150 C/W TJ, TSTG C Electrical Characteristics (Per Leg) @TA = 25C unless otherwise specified Characteristic Symbol Min Forward Voltage Drop VF - Leakage Current (Note 1) IR - Notes: Typ 0.43 Max 0.53 0.48 - 0.5 100 Unit V mA Test Condition IF = 10A, TJ = 25C IF = 10A, TJ = 125C VR = 40V, TJ = 25C VR = 40V, TJ = 125C 1. Short duration pulse test used to minimize self-heating effect. 2. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes SBR is a registered trademark of Diodes Incorporated. SBR2040 Document number: DS30973 Rev. 6 - 2 1 of 4 www.diodes.com July 2010 (c) Diodes Incorporated 10 IF, INSTANTANEOUS FORWARD CURRENT (A) IF(AVE), AVERAGE FORWARD CURRENT (A) SBR2040CT SBR2040CTFP 5 100 10 Tj=150C Tj=125C 1 Tj=75C Tj=25C 0.1 0 0 25 50 75 100 125 0.00 150 0.10 0.20 0.30 0.40 0.50 0.60 0.70 VF, INSTANTANEOUS FORWARD VOLTAGE (V) TC, CASE TEMPERATURE (C) Figure 1: Current Derating Curve, Per Element Figure 2: Typical Forward Characteristics, Per Element IR, INSTANTANEOUS REVERSE CURRENT (mA) 100 Tj=150C Tj=125C 10 Tj=75C 1 Tj=25C 0.1 0 10 20 30 40 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Figure 3: Typical Reverse Characteristics, Per Element Ordering Information (Notes 3 & 4) Part Number SBR2040CT SBR2040CT-G SBR2040CTFP SBR2040CTFP-G SBR2040CTFP-JT Notes: Case TO-220AB TO-220AB ITO-220AB ITO-220AB ITO-220AB (Alternate) Packaging 50 pieces/tube 50 pieces/tube 50 pieces/tube 50 pieces/tube 50 pieces/tube 3. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. 4. For Green Molding Compound version part numbers, add "-G" suffix to part number above. Examples: SBR2040CT-G. Marking Information SBR2040CTFP = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year (ex: 06 = 2006) WW = Week (01 - 53) SBR2040CT = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year (ex: 06 = 2006) WW = Week (01 - 53) SBR2040CT SBR2040CTFP YYWW AB YYWW AB SBR is a registered trademark of Diodes Incorporated. SBR2040 Document number: DS30973 Rev. 6 - 2 2 of 4 www.diodes.com July 2010 (c) Diodes Incorporated SBR2040CT SBR2040CTFP Package Outline Dimensions A E A1 Q SEATING PLANE P 16.00 0.20* H1 D D1 L1 L b2 c b e A2 *Guaranteed by TO-220AB leadframe design e1 A E F OP Q + D Not Through Holes 1 2 3 b2 L1 A1 L2 J1 b1 L b c e TO-220AB Dim Min Typ Max A 3.56 4.82 A1 0.51 1.39 A2 2.04 2.92 b 0.39 0.81 1.01 b2 1.15 1.24 1.77 c 0.356 0.61 D 14.22 16.51 D1 8.39 9.01 e 2.54 e1 5.08 E 9.66 10.66 H1 5.85 6.85 L 12.70 14.73 L1 6.35 P 3.54 4.08 Q 2.54 3.42 All Dimensions in mm A A1 Q 10 D 5 5 D1 L1 1 2 3 5 5 3 x b1 A2 3xb L 2xe c ITO-220AB Dim Min Typ Max A 4.50 4.70 4.90 A1 3.04 3.24 3.44 A2 2.56 2.76 2.96 b 0.50 0.60 0.75 b1 1.10 1.20 1.35 c 0.50 0.60 0.70 D 15.67 15.87 16.07 D1 8.99 9.19 9.39 e 2.54 E 9.91 10.11 10.31 L 9.45 9.75 10.05 L1 15.80 16.00 16.20 P 2.98 3.18 3.38 Q 3.10 3.30 3.50 All Dimensions in mm ITO-220AB ALTERNATE DIM. MIN. MAX. A 4.30 4.70 A1 1.3 b 0.50 0.75 b1 1.10 1.35 b2 1.50 1.75 c 0.50 0.75 D 14.80 15.20 E 9.96 10.36 e 2.54 typ F 2.80 3.20 J1 2.50 2.90 L 12.80 13.60 L1 1.70 1.90 L2 1.90 2.10 OP 3.50 typ Q 2.70 typ All Dimensions in mm SBR is a registered trademark of Diodes Incorporated. SBR2040 Document number: DS30973 Rev. 6 - 2 OP E 3 of 4 www.diodes.com July 2010 (c) Diodes Incorporated SBR2040CT SBR2040CTFP IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2010, Diodes Incorporated www.diodes.com SBR is a registered trademark of Diodes Incorporated. SBR2040 Document number: DS30973 Rev. 6 - 2 4 of 4 www.diodes.com July 2010 (c) Diodes Incorporated