Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 |
Installation terminals
- 1 -
General ordering data
Order No. 0471780000
Part designation NT 2.5/35 10X3 BL
Version Neutral conductor modular terminal, 2.5 mm²,
Screw connection, PA 66, blue, TS 35
EAN 4008190112820
Qty. 100 pc(s).
Product notes
Note, technical data Tightening torque via disconnector is 0.5 ... 0.8
Nm.
Product description These NT modular terminals are prescribed for
insulation measurements without detaching the
conductors according to VDE standards for places
of public assembly.
Note, accessories Refer to the "Accessories" section for PEN bridges
and additional clamping-yoke versions. Use of
twin wire-end ferrules on request.
Additional technical data
Colour of insulating material blue
Connection direction on side
End plate required Yes
Explosion-tested version "Ex e" No
Installation advice TS 35
Insulating material PA 66
Levels cross-connected internally No
No. of terminal strips per level 2
Open sides right
Operating temperature range - 50 °C, + 100 °C
Product family SAK Series
Type of connection Screwed
Type of mounting Snap-on
UL 94 flammability rating of insulation material V2
Version Neutral conductor disconnect terminal
CSA rating data
Voltage (CSA) 300 V
CSA current 25 A
Min. cross-section (CSA) AWG 22
Max. cross-section (CSA) AWG 12
Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 |
Installation terminals
- 2 -
CSA rating data
Conductors for clamping (additional
connection)
Stranded, max. 4 mm²
Flexible with ferrule, min. (DIN 46228 pt 1) 0.5 mm²
Flexible with ferrule, max. (DIN 46228 pt 1) 2.5 mm²
Conductors for clamping (rated connection)
Clamping range, min. 0.33 mm²
Clamping range, max. 4 mm²
Type of connection Screw connection
2nd type of connection screwed
Connection direction on side
No. of connections 2
Stripping length 10 mm
Clamping screw M 2.5
Blade size 0.6 x 3.5 mm
Tightening torque range 0.5...0.8 Nm
Gauge to IEC 60947-1 A3
Solid, min. 0.5 mm²
Solid, max. 4 mm²
Stranded, min. 0.5 mm²
Stranded, max. 4 mm²
Flexible, min. 0.5 mm²
Flexible, max. 0.5 mm²
Flexible with ferrule, min. (DIN 46228/1) 0.5 mm²
Flexible with ferrule, max. (DIN 46228/1) 2.5 mm²
Flexible, min., ferrule with plastic collar (DIN
46228 pt 4)
0.5 mm²
Flexible, max., ferrule with plastic collar (DIN
46228 pt 4)
2.5 mm²
AWG conductor size, min. AWG 22
AWG conductor size, max. AWG 12
Dimensions
Width 6 mm
Height of lowest version 44 mm
Length 45 mm
N-conductor disconnect terminal
For N-busbar 3 x 10 mm
Rating data
Rated cross-section 2.5 mm²
Rated voltage 400 V
Rated impulse voltage 6 kV
Rated current 24 A
Standards IEC 60947-7-1
Current with max. conductor 24 A
Pollution severity 3
Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 |
Installation terminals
- 3 -
UL rating data
Voltage (UL) 300 V
Current (UL) 20 A
Min. cross-section (UL) AWG 22
Max. cross-section (UL) AWG 12
Approvals
Approvals institutes
Classifications
ETIM 2.0 EC001257
ETIM 3.0 EC001257
eClass 4.1 27-14-11-20
eClass 5.0 27-14-11-38
eClass 5.1 27-14-11-38
Similar products
Order No. Part designation Version
0471880000 NT 10/35 10X3 BL Neutral conductor modular terminal, 10 mm², Busbar connection, PA
66, blue, TS 35
0499280000 NT 16/35 10X3 BL Neutral conductor modular terminal, 16 mm², Busbar connection, PA
66, blue, TS 35
0501470000 NT 6/35 10X3 KRG/BL Neutral conductor modular terminal, 6 mm², Screw connection, PA
66, blue, TS 35
