Wire-wound Chip Inductors - Open ctparts.com
Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids
800-684-5322 Inside US 949-453-1811 Outside US
Copyright © 2003 by CT Magnetics, DBA Central Technologies. All rights reserved.
CT Magnetics reserves the right to make improvements or change specifications without notice
CENTRAL
Technologies
05.23.03
Size A B C D E F
Max. Max. Max.
mm 2.2 1.64 1.45 1.27 0.5 1.03
inches 0.086 0.068 0.057 0.05 0.02 0.04
PHYSICAL DIMENSIONS
SPECIFICATIONS
CT0805HS Series
From 2.2 nH to 1000 nH
Not shown at actual size.
CHARACTERISTICS
Description: SMD ceramic core wire-wound chip inductor
Applications: LC resonant circuits such as oscillator and signal
generators, impedance matching, circuit isolation, RF filters, disk
drives and computer peripherals, audio and video equipment, TV,
radio and telecommunication equipment
Operating Temperature: -40°C to +125°C
Inductance Tolerance: ±1%, ±2%, ±5%, ±10%, ±20%
Testing: Inductance and Q are tested on an HP4287A at specified
frequency
Packaging: Tape & Reel
Marking: Reels are marked with inductance code and tolerance
Coated: Epoxy resin on top of the part to per manently set the coil
Miscellaneous: Par ts are also available with a clear plastic cap.
Other values available
Additional Information: Additional electrical & physical
information available upon request
Samples available. See website for ordering information.
Please specify tolerance code when ordering.
CT0805HS-330_ F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%
* = K or M only ** = J, K or M only *** = G, J, K or M only
PAD LAYOUT
L T est Q Q T est SRF DCR Rated
Part Inductance Freq. Fact. Freq. Min. Max. DC
Number (nH) (MHz) Min. (MHz) (MHz) (Ω
Ω) (mA)
CT0805HS-020_* 2.2 250 40 1500 >6000 0.1 600
CT0805HS-030_** 3.3 250 30 1500 >6000 0.08 600
CT0805HS-060_** 6.8 250 50 1000 5000 0.11 600
CT0805HS-080_** 8.2 250 50 1000 4800 0.19 600
CT0805HS-120_*** 12 250 50 500 4100 0.15 600
CT0805HS-150_** 15 250 50 500 2900 0.17 600
CT0805HS-180_*** 18 250 50 500 3300 0.20 600
CT0805HS-220_*** 22 250 55 500 2600 0.22 500
CT0805HS-270_*** 27 250 60 500 2500 0.25 500
CT0805HS-330_ 33 250 60 500 2200 0.27 500
CT0805HS-390_ 39 250 60 500 2100 0.29 500
CT0805HS-470_ 47 200 60 500 1750 0.31 500
CT0805HS-560_ 56 200 60 500 1650 0.32 500
CT0805HS-680_ 68 200 60 500 1500 0.38 500
CT0805HS-820_ 82 150 60 500 1400 0.42 400
CT0805HS-101_ 100 150 60 500 1200 0.46 400
CT0805HS-121_ 120 150 50 250 1200 0.51 400
CT0805HS-151_ 150 100 50 250 1000 0.56 400
CT0805HS-181_ 180 100 50 250 950 0.64 400
CT0805HS-221_*** 220 100 45 250 850 0.70 400
CT0805HS-271_*** 270 100 40 250 680 1.00 350
CT0805HS-331_*** 330 100 40 250 660 1.40 310
CT0805HS-391_*** 390 100 35 250 560 1.50 290
CT0805HS-471_** 470 50 33 100 430 1.72 250
CT0805HS-561_** 560 25 23 50 350 1.90 230
CT0805HS-621_** 620 25 23 50 330 1.95 200
CT0805HS-681_** 680 25 23 50 300 2.05 190
CT0805HS-751_** 750 25 23 50 280 2.10 180
CT0805HS-821_** 820 25 23 50 250 2.30 180
CT0805HS-911_** 910 25 22 50 230 2.40 160
CT0805HS-102_** 1000 25 20 50 200 2.50 150
