1
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Specifi cations are subject to change
Ceramic Disc Capacitors NCD Series Class II/III
GENERAL PURPOSE, HI-K
(DIELECTRIC CONSTANT Class II/III) TYPE
FEATURES
• WIDE SELECTION OF TEMPERATURE CHARACTERISTICS
• HIGH INSULATION RESISTANCE
• EXCELLENT HIGH FREQUENCY CHARACTERISTICS
• ECONOMICALLY PRICED
• AVAILABLE WITH FORMED LEADS AND ON TAPE FOR AUTOMATIC
..INSERTION
SPECIFICATIONS
* Special low dissipation factor (1.0% max.) Y5F and Y5P dielectrics are also available.
Contact NIC for availability.
Temperature
Characteristics Y5F Y5P Z5U Z5V
Operating
Temperature Range -30°C ~ +85°C -30°C ~ +85°C +10°C ~ +85°C +10°C ~ +85°C
Capacitance Range 100pF ~ 0.01μF 100pF ~ 0.022μF 0.001μF ~ 0.01μF 0.001μF ~ 0.1μF
Standard Tolerance ±10% (K) ±10% (K) ±20% (M) +80%/-20% (Z)
Capacitance Change Over
Temperature Range ±7.5% ±10% -55% ~ +22 -82% ~ +22%
Dissipation Factor 2.5%* 2.5%* 5% 5%
Insulation Resistance Minimum 10,000 Megohms
Working Voltage Range 50Vdc ~ 1KVdc
Dielectric Withstanding
Voltage (Test Voltage) 2.5 Times Rated Voltage For Not Less Than 1 Second, 50mA Maximum
Load Life
Test @ 85°C
1,000 Hours
Cap. Change ±10% ±10% ±20% ±30%
D.F. (max.) 4% 4% 7.5% 7.5%
I.R. (min.) 1,000 Megohms
Test Conditions 1KHz, 1.0V ±02Vrms 1KHz, 0.5V ± 0.1Vrms
*See Part Number System for Details
2
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Specifi cations are subject to change
Ceramic Disc Capacitors
STANDARD PRODUCTS AND MAXIMUM DIAMETER (mm)
BY T.C. AND VOLTAGE
NCD Series Class II/III
LEAD DIAMETER
0.6MM IS STANDARD BODY THICKNESS
2 ~ 4MM DEPENDENT ON CV
*.0047μF AND ABOVE NOT AVAILABLE IN Y5F, PLEASE USE Y5P.
NIC RESERVES THE RIGHT TO REQUEST MINIMUM QUANTITIES ON
CERTAIN VALUES.
(BULK ONLY)
(BULK AND TAPED STYLES)
23 min.
5 max.
S
J Style
1.5+0.2
4.7 + 1
5 max.
S
D Style
1.5+0.2
K Style
23 min.
5 max.
1.5+0.2
S
E Style
4.7 + 1
5 max.
1.5+0.2
S
23 min.
2 max.
S
Low Voltage
100Vdc & Below
Standard
500Vdc & Up
23 min.
3 max.
S
Cap.
(pF/μF)
Y5F/Y5P* Z5U Z5V
Working Voltage (Vdc)
50
100 500 1K 50
100 500 1K 50
100 500 1K
100~470pF 6 6 6 ------
560 666------
680 667------
750 667------
820 667------
0.001μF677666-66
0.0015 6 8 8 6 6 7 - 6 6
0.0022 6 9 10 6 7 7 6 6 6
0.0027 7 10 12 6 7 8 6 6 7
0.0033 7 10 14 6 7 9 6 7 8
0.0047 8 12 14 6 8 10 6 8 8
0.0056 9 14 16 6 9 10 6 8 9
0.0068 9 14 16 7 9 12 6 8 10
0.0082 10 16 18 7 10 12 6 9 10
0.01 12 16 20 7 10 12 6 9 10
0.015 14 21 - 9 14 16 7 10 12
0.022 - - - 10 16 18 8 14 16
0.033 - - - 8 18 22 7 16 18
0.047 - - - 8 21 24 7 16 21
0.068 - - - 8/9 24 - 8 16 -
0.1 - - - 8/9 26 - 8/9 17 -
Lead Spacing (mm) - S
Body
Diameter
Standard
Bulk
Standard
T&R
Optional Bulk
mm (inches)
Optional T&R
mm (inches)
5 ~ 11 6.35 ± 0.8 5.0 ± 0.8 5.0 ± 0.8 (0.200LS) 2.5 ± 0.8 (0.100LS)
>12 6.35 ± 0.8 5.0 ± 0.8 7.5 ± 0.8 (0.295LS) 7.5 ± 0.8 (0.295LS)
10.0 ± 0.8 (0.395LS) 10.0 ± 0.8 (0.395LS)
NCD 103 M50 Z5U TR
J
Optional Packaging
TR = Taped and Reel
TB = Tape and Box (Ammo)
Optional Lead Style
C = Cut Lead
D = Inside Kink (Short Leads)
E = Outward Kink (Short Leads)
J = Inside Kink (Long Leads)
K = Outward Kink (Long Leads)
Temperature Coeffi cient
Working Voltage DC
Tolerance Code
C = ± 0.25pF K = ± 10%
D = ± 0.5pF M = ± 20%
J = ± 5% Z = + 80% / - 20%
Capacitance code, expressed in pfd,
First two digits are signifi cant, third digit is no. of
zeros. “R” indicates decimal for under 10pfd.
Series
RoHS compliant
F
.100LS
Optional Lead Space (LS) and/or
Lead Length (LL) in inches
3
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Specifi cations are subject to change
Ceramic Disc Capacitors Taping Specifi cations
DIMENSIONS (mm)
Symbol D max. d P P0P1P2SH H
0H1DφWL tΔh
Value
< 12 0.6 12.7
12.7
5.1
6.35
2.5
20.0
Applies to Parts
with
Crimped Leads
16.0
32.25
max.
4.0 18.0 11.0
max. 0.6 0.0
3.85 5.0
3.18 6.35
>12 ~ 23
0.6
or
0.8*
25.4
8.95
12.7
7.5 H max.
+
D max.
7.7 9.5
Tolerance
< 12 +0.06
-0.05 ±1.0 ±0.2
±0.7 ±1.0 +0.8
-0.2
+1.5
-1.0 ±0.5 --- ±0.2 ±0.5 --- ±0.3 ±2.0
>12 ~ 23 ±1.5 ±1.3
*Lead diameter dependent on capacitor diameter. Contact NIC for details
Straight Leads
<12mm diameter
(a slight lead fl are may be present)
D
d
H
H
1
L
W
P
0
P
P
2
P
1
S
D
Crimped Leads
<12mm diameter
Inward (J) & Outward (K) are available
Dφ
d
H
0
H
1
L
W
P
0
P
P
2
P
1
S
D
H
Crimped Leads
>12 ~ 23mm diameter
Inward (J) & Outward (K) are available
Dφ
d
H
0
H
1
L
W
P
0
P
P
2
P
1
S
D
H
Straight Leads
>12 ~ 23mm diameter
(a slight lead fl are may be present)
D
d
H
H
1
L
W
P
0
P
P
2
P
1
S
D
Δh
t
4
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Specifi cations are subject to change
Ceramic Disc Capacitors Taping Specifi cations
AMMO PACK
H ≤ 372 (14.64")
L ≤ 377 (14.84")
W ≤ 55 (2.16")
Acceptable to
standard radial type cartridge.
Acceptable to standard radial type cartridge with a few
extra accessories.
D < 354 (13.93")
B > 21 (.83") but
< 30 (1.18")
W < 55 (2.16")
=
=
=
=
H
L
W
REEL
W
D
B
PART NUMBER SUFFIX FOR OPTIONAL TAPE & REEL OR TAPE & BOX PACKAGING
Tape & Reel Straight Lead Options
TRF = Tape & Reel with 5mm lead-space
TR.100LSF = Tape & Reel with 2.0mm lead-space
TR.250LSF = Tape & Reel with 6.35mm lead-space
TR.300LSF = Tape & Reel with 7.5mm lead-space
TR.375LSF = Tape & Reel with 9.5mm lead-space
Tape & Reel Crimped Lead Options (J = Inward Crimp, K = Outward Crimp)
JTRF or KTRF = Tape & Reel with 5mm lead-space
JTR.250LSF or KTR.250LSF = Tape & Reel with 6.35mm lead-space
JTR.300LSF or KTR.300LSF = Tape & Reel with 7.5mm lead-space
JTR.375LSF or KTR.375LSF = Tape & Reel with 9.5mm lead-space
Tape & Box Straight Lead Options
TBF = Tape & Reel with 5mm lead-space
TB.100LSF = Tape & Reel with 2.0mm lead-space
TB.250LSF = Tape & Reel with 6.35mm lead-space
TB.300LSF = Tape & Reel with 7.5mm lead-space
TB.375LSF = Tape & Reel with 9.5mm lead-space
Tape & Box Crimped Lead Options (J = Inward Crimp, K = Outward Crimp)
JTBF or KTBF = Tape & Reel with 5mm lead-space
JTB.250LSF or KTBR.250LSF = Tape & Reel with 6.35mm lead-space
JTB.300LSF or KTB.300LSF = Tape & Reel with 7.5mm lead-space
JTB.375LSF or KTB.375LSF = Tape & Reel with 9.5mm lead-space
Notes:
1. The above lead-space options may not be available in all part diameters. Contact NIC for details.
2. Inward "J style" and outward "K style" may not be available in all part diameters and voltages. Contact NIC for details.
