s ge ka * L. U. ED Z NI G 39 CO 716 E R #E ed ct le Se c Pa Fi le E6 TO-263 D 2 Pak TO-92 *TO-218 TO-252 D-Pak TO-202 *TO-218X 3-lead Compak *TO-220 TO-251 V-Pak A K G SCRs (1 A to 70 A) RoHS E6 General Description The Teccor line of thyristor SCR semi-conductors are half-wave, unidirectional, gate-controlled rectifiers which complement Teccor's line of sensitive SCRs. Teccor offers devices with ratings of 1 A to 70 A and 200 V to 1000 V, with gate sensitivities from 10 mA to 50 mA. If gate currents in the 12 A to 500 A ranges are required, see "Sensitive SCRs" section of this catalog. Three packages are offered in electrically isolated construction where the case or tab is internally isolated to allow the use of low-cost assembly and convenient packaging techniques. The Teccor line of SCRs features glass-passivated junctions to ensure long-term reliability and parameter stability. Teccor's glass offers a rugged, reliable barrier against junction contamination. Variations of devices covered in this data sheet are available for custom design applications. Consult the factory for more information. Features * * * * * Compak SCR * * * * (c)2004 Littelfuse, Inc. Thyristor Product Catalog E6 - 1 RoHS Compliant Electrically-isolated package High voltage capability -- 200 V to 1000 V High surge capability -- up to 950 A Glass-passivated chip Surface mount package -- 1 A series New small profile three-leaded Compak package Packaged in embossed carrier tape with 2,500 devices per reel Can replace SOT-223 http://www.littelfuse.com +1 972-580-7777 SCRs Data Sheets Part Number Isolated VDRM & VRRM IT Non-isolated IGT (1) (2) (15) A TYPE (4) A A A G G A K G G K K A TO-92 K A A K G A TO-220 TO-202 G K A TO-220 K G A TO-251 V-Pak Compak TO-252 D-Pak See "Package Dimensions" section for variations. (11) 1A Amps IT(RMS) IT(AV) Volts MAX MAX MIN MIN mAmps MAX S201E S2N1 1 0.64 200 1 10 S401E S4N1 1 0.64 400 1 10 S601E S6N1 1 0.64 600 1 10 6A S2006L S2006F1 S2006V S2006D 6 3.8 200 1 15 S4006L S4006F1 S4006V S4006D 6 3.8 400 1 15 S6006L S6006F1 S6006V S6006D 6 3.8 600 1 15 S8006V S8006D 6 3.8 800 1 15 S8006L SK006L 8A 10 A SK006V SK006D 6 3.8 1000 1 15 S2008L S2008F1 S2008R S2008V S2008D 8 5.1 200 1 15 S4008L S4008F1 S4008R S4008V S4008D 8 5.1 400 1 15 S6008L S6008F1 S6008R S6008V S6008D 8 5.1 600 1 15 S8008L S8008R S8008V S8008D 8 5.1 800 1 15 SK008L SK008R SK008V SK008D 8 5.1 1000 1 15 S2010L S2010F1 S2010R S2010V S2010D 10 6.4 200 1 15 S4010L S4010F1 S4010R S4010V S4010D 10 6.4 400 1 15 S6010L S6010F1 S6010R S6010V S6010D 10 6.4 600 1 15 S8010L S8010R S8010V S8010D 10 6.4 800 1 15 SK010L SK010R SK010V SK010D 10 6.4 1000 1 15 S2012R S2012V S2012D 12 7.6 200 1 20 S4012R S4012V S4012D 12 7.6 400 1 20 S6012R S6012V S6012D 12 7.6 600 1 20 S8012R S8012V S8012D 12 7.6 800 1 20 SK012R SK012V SK012D 12 7.6 1000 1 20 12 A Specific Test Conditions VDRM and VRRM -- Repetitive peak off-state forward and reverse voltage Vgt -- DC gate trigger voltage; VD = 12 V dc; RL = 60 for 1 to 16 A devices and 30 for 20 to 70 A devices di/dt -- Maximum rate-of-rise of on-state current; IGT = 150 mA with 0.1 s rise time VTM -- Peak on-state voltage at maximum rated RMS current dv/dt -- Critical rate of applied forward voltage I2t -- RMS surge (non-repetitive) on-state current for period of 8.3 ms for fusing General Notes IDRM and IRRM -- Peak off-state forward and reverse current at VDRM and VRRM * All measurements are made at 60 Hz with a resistive load at an ambient temperature of +25 C unless otherwise specified. Igt -- dc gate trigger current; VD = 12 V dc; RL = 60 for 1 to 16 A devices and 30 for 20 to 70 A devices * Operating temperature range (TJ) is -65 C to +125 C for TO-92 devices and -40 C to +125 C for all other packages. IGM -- Peak gate current * Storage temperature range (TS) is -65 C to +150 C for TO-92 devices, -40 C to +150 C for TO-202 and TO-220 devices, and -40 C to +125 C for all others. * Lead solder temperature is a maximum of 230 C for 10 seconds maximum; 1/16" (1.59 mm) from case. * The case temperature (TC) is measured as shown on dimensional outline drawings in the "Package Dimensions" sectionof this catalog. IH -- dc holding current; gate open IT -- Maximum on-state current ITSM -- Peak one-cycle forward surge current PG(AV) -- Average gate power dissipation PGM -- Peak gate power dissipation tgt -- Gate controlled turn-on time; gate pulse = 100 mA; minimum width = 15 s with rise time 0.1 s tq -- Circuit commutated turn-off time http://www.littelfuse.com +1 972-580-7777 E6 - 2 (c)2004 Littelfuse, Inc. Thyristor Product Catalog Data Sheets SCRs IDRM & IRRM VTM VGT IH IGM PGM (14) (3) (8) (17) (5) (13) (12) (12) mAmps Volts Volts TC = TC = 100 C 125 C TC = 25 C TC = 25 C mAmps MAX MAX MAX TC = 25 C MAX PG(AV) ITSM Amps Amps Watts I2 t dv/dt di/dt (6) (10) Watts 60/50 Hz tgt tq (7) (9) (10) Sec Sec TYP MAX Volts/Sec TC = 100 C TC = 125 C MIN MIN Amps2Sec Amps/Sec 0.01 0.2 0.5 1.6 1.5 30 1.5 15 0.3 30/25 40 20 3.7 50 2 35 0.01 0.2 0.5 1.6 1.5 30 1.5 15 0.3 30/25 40 20 3.7 50 2 35 0.01 0.2 0.5 1.6 1.5 30 1.5 15 0.3 30/25 40 20 3.7 50 2 35 0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 350 250 41 100 2 35 0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 350 250 41 100 2 35 0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 300 225 41 100 2 35 0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 250 200 41 100 2 35 0.02 3 1.6 1.5 30 2 20 0.5 100/83 100 41 100 2 35 0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 350 250 41 100 2 35 0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 350 250 41 100 2 35 0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 300 225 41 100 2 35 0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 250 200 41 100 2 35 0.02 3 1.6 1.5 30 2 20 0.5 100/83 100 41 100 2 35 0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 350 250 41 100 2 35 0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 350 250 41 100 2 35 0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 300 225 41 100 2 35 0.02 0.5 1 1.6 1.5 30 2 20 0.5 100/83 250 200 41 100 2 35 0.02 3 1.6 1.5 30 2 20 0.5 100/83 100 41 100 2 35 0.01 0.5 1 1.6 1.5 40 2 20 0.5 120/100 350 250 60 100 2 35 0.01 0.5 1 1.6 1.5 40 2 20 0.5 120/100 350 250 60 100 2 35 0.01 0.5 1 1.6 1.5 40 2 20 0.5 120/100 300 225 60 100 2 35 0.02 0.5 1 1.6 1.5 40 2 20 0.5 120/100 250 200 60 100 2 35 0.02 3 1.6 1.5 40 2 20 0.5 120/100 100 60 100 2 35 Electrical Specification Notes (11) See package outlines for lead form configuration. When ordering special lead forming, add type number as suffix to part number. (1) See Figure E6.5 through Figure E6.16 for current rating at specified operating case temperature. (12) Pulse width 10 s (2) See Figure E6.1 and Figure E6.2 for free air current rating. (13) Initial on-state current = 200 mA dc for 1 A through 16 A devices; 400 mA dc for 20 A through 70 A devices. (3) See Figure E6.19 and Figure E6.20 for instantaneous on-state current versus on-state voltage (typical). (14) TC = TJ for test conditions in off state. (4) See Figure E6.18 for IGT versus TC. (5) See Figure E6.17 for IH versus TC. (6) For more than one full cycle rating, see Figure E6.23. (7) See Figure E6.22 for tgt versus IGT. (8) See Figure E6.21 for VGT versus TC. (9) (15) The R, K, or M package rating is intended for high surge condition use only and not recommended for 50 A rms continuous current use since narrow pin lead temperature can exceed PCB solder melting temperature. Teccor's J package or W package is recommended for 50 A rms continuous current requirements. Test conditions are as follows: (16) For various durations of an exponentially decaying current waveform, see Figure E6.3 and Figure E6.4. (tW is defined as 5 time constants.) * IT = 1 A for 1 A devices and 2 A for all other devices (17) Minimum non-trigger VGT at 125 C is 0.2 V. * Pulse duration = 50 s, dv/dt = 20 V/s, di/dt = -10 A/s for 1 A devices, and -30 A/s for other devices * IGT = 200 mA at turn-on (10) See Figure E6.5 through Figure E6.10 for maximum allowable case temperatures at maximum rated current. (c)2004 Littelfuse, Inc. Thyristor Product Catalog E6 - 3 http://www.littelfuse.com +1 972-580-7777 SCRs Data Sheets Part Number Isolated VDRM & VRRM IT Non-isolated IGT IDRM & IRRM (4) (14) (1) (15) A A A TYPE A G A K K A G K G K G G K A A K A G A TO-220 TO-218X TO-218 TO-220 TO-218X Amps G K A TO-263 D2Pak TO-218 IT(RMS) See "Package Dimensions" section for variations. (11) 15 A 25 A 35 A MAX Volts mAmps TC = 100 C TC = 125 C MIN MIN MAX 15 9.5 200 1 30 0.01 0.5 1 S4015L 15 9.5 400 1 30 0.01 0.5 1 S6015L 15 9.5 600 1 30 0.01 0.5 1 S8015L 15 9.5 800 1 30 0.02 1 2 SK015L 15 9.5 1000 1 30 0.02 3 MAX S2016R S2016N 16 10 200 1 30 0.01 0.5 1 S4016R S4016N 16 10 400 1 30 0.01 0.5 1 S6016R S6016N 16 10 600 1 30 0.01 0.5 1 S8016R S8016N 16 10 800 1 30 0.02 1 2 SK016R SK016N 16 10 1000 1 30 0.02 3 S2020L 20 12.8 200 1 30 0.01 0.5 1 S4020L 20 12.8 400 1 30 0.01 0.5 1 S6020L 20 12.8 600 1 30 0.01 0.5 1 S8020L 20 12.8 800 1 30 0.02 1.0 2 SK020L 20 12.8 1000 1 30 0.02 3 S2025L S2025R S2025N 25 16 200 1 35 0.01 1 2 S4025L S4025R S4025N 25 16 400 1 35 0.01 1 2 S6025L S6025R S6025N 25 16 600 1 35 0.01 1 2 S8025L S8025R S8025N 25 16 800 1 35 0.02 1.5 3 SK025L SK025R SK025N 25 16 1000 1 35 0.02 3 S2035J S2035K 35 22 200 5 40 0.01 1 2 S4035J S4035K 35 22 400 5 40 0.01 1 2 S6035J S6035K 35 22 600 5 40 0.01 1 2 S8035J S8035K 35 22 800 5 40 0.02 1.5 3 SK035K 35 22 1000 5 40 0.02 3 40 A 55 A S2040R S2040N 40 25 200 5 40 0.01 1 2 S4040R S4040N 40 25 400 5 40 0.01 1 2 S6040R S6040N 40 25 600 5 40 0.01 1 2 S8040R S8040N 40 25 800 5 40 0.02 1.5 3 SK040R SK040N 40 25 1000 5 40 0.03 5 S2055R S2055W S2055M S2055N 55 35 200 5 40 0.01 1 2 S4055R S4055W S4055M S4055N 55 35 400 5 40 0.01 1 2 S6055R S6055W S6055M S6055N 55 35 600 5 40 0.01 1 2 S8055R S8055W S8055M S8055N 55 35 800 5 40 0.02 1.5 3 SK055M SK055N 55 35 1000 5 40 0.03 5 SK055R 65 A IT(AV) S2015L 16 A 20 A mAmps TC = 25 C S2065J S2065K 65 41 200 5 50 0.02 1.5 3 S4065J S4065K 65 41 400 5 50 0.02 1.5 3 S6065J S6065K 65 41 600 5 50 0.02 1.5 3 S8065J S8065K 65 41 800 5 50 0.02 2 5 SK065K 70 A 65 41 1000 5 50 0.03 5 S2070W 70 45 200 5 50 0.02 1.5 3 S4070W 70 45 400 5 50 0.02 1.5 3 S6070W 70 45 600 5 50 0.02 1.5 3 S8070W 70 45 800 5 50 0.02 2 5 See "General Notes" on page E6 - 2 and "Electrical Specification Notes" on page E6 - 3. http://www.littelfuse.com +1 972-580-7777 E6 - 4 (c)2004 Littelfuse, Inc. Thyristor Product Catalog Data Sheets SCRs VTM VGT IH IGM PGM (3) (8) (17) (5) (13) (12) (12) Volts Volts TC = 25 C TC = 25 C MAX MAX PG(AV) ITSM Amps Watts di/dt (6) (10) (16) Amps mAmps I2 t dv/dt Watts 60/50 Hz MAX tgt tq (7) (9) (10) Sec Sec TYP MAX Volts/Sec TC = 100 C TC = 125 C MIN MIN Amps2Sec Amps/Sec 1.6 1.5 40 3 30 0.6 225/188 450 350 210 125 2 35 1.6 1.5 40 3 30 0.6 225/188 450 350 210 125 2 35 1.6 1.5 40 3 30 0.6 225/188 425 325 210 125 2 35 1.6 1.5 40 3 30 0.6 225/188 400 300 210 125 2 35 1.6 1.5 40 3 30 0.6 225/188 200 210 125 2 35 1.6 1.5 40 3 30 0.6 225/188 450 350 210 125 2 35 1.6 1.5 40 3 30 0.6 225/188 450 350 210 125 2 35 1.6 1.5 40 3 30 0.6 225/188 425 325 210 125 2 35 1.6 1.5 40 3 30 0.6 225/188 400 300 210 125 2 35 1.6 1.5 40 3 30 0.6 225/188 200 210 125 2 35 1.6 1.5 40 3 30 0.6 300/255 450 350 374 125 2 35 1.6 1.5 40 3 30 0.6 300/255 450 350 374 125 2 35 1.6 1.5 40 3 30 0.6 300/255 425 325 374 125 2 35 1.6 1.5 40 3 30 0.6 300/255 400 300 374 125 2 35 1.6 1.5 40 3 30 0.6 300/255 200 374 125 2 35 1.6 1.5 50 3.5 35 0.8 350/300 450 350 510 150 2 35 1.6 1.5 50 3.5 35 0.8 350/300 450 350 510 150 2 35 1.6 1.5 50 3.5 35 0.8 350/300 425 325 510 150 2 35 1.6 1.5 50 3.5 35 0.8 350/300 400 300 510 150 2 35 1.6 1.5 50 3.5 35 0.8 350/300 200 510 150 2 35 1.8 1.5 50 3.5 35 0.8 500/425 450 350 1035 150 2 35 1.8 1.5 50 3.5 35 0.8 500/425 450 350 1035 150 2 35 1.8 1.5 50 3.5 35 0.8 500/425 425 325 1035 150 2 35 1.8 1.5 50 3.5 35 0.8 500/425 400 300 1035 150 2 35 1.8 1.5 50 3.5 35 0.8 500/425 200 1035 150 2 35 1.8 1.5 60 3.5 35 0.8 520/430 650 550 1122 175 2.5 35 1.8 1.5 60 3.5 35 0.8 520/430 650 550 1122 175 2.5 35 1.8 1.5 60 3.5 35 0.8 520/430 600 500 1122 175 2.5 35 1.8 1.5 60 3.5 35 0.8 520/430 500 475 1122 175 2.5 35 1.8 1.5 60 3.5 35 0.8 520/430 250 1122 175 2.5 35 1.8 1.5 60 4 40 0.8 650/550 650 550 1750 175 2.5 35 1.8 1.5 60 4 40 0.8 650/550 650 550 1750 175 2.5 35 1.8 1.5 60 4 40 0.8 650/550 600 500 1750 175 2.5 35 1.8 1.5 60 4 40 0.8 650/550 500 475 1750 175 2.5 35 1.8 1.5 60 4 40 0.8 650/550 250 1750 175 2.5 35 1.8 2 80 5 50 1 950/800 650 550 3745 200 2.5 35 1.8 2 80 5 50 1 950/800 650 550 3745 200 2.5 35 1.8 2 80 5 50 1 950/800 600 500 3745 200 2.5 35 1.8 2 80 5 50 1 950/800 500 475 3745 200 2.5 35 1.8 2 80 5 50 1 950/800 250 3745 200 2.5 35 1.8 2 80 5 50 1 950/800 650 550 3745 200 2.5 35 1.8 2 80 5 50 1 950/800 650 550 3745 200 2.5 35 1.8 2 80 5 50 1 950/800 600 500 3745 200 2.5 35 1.8 2 80 5 50 1 950/800 500 475 3745 200 2.5 35 See "General Notes" on page E6 - 2 and "Electrical Specification Notes" on page E6 - 3. (c)2004 Littelfuse, Inc. Thyristor Product Catalog E6 - 5 http://www.littelfuse.com +1 972-580-7777 SCRs Data Sheets Thermal Resistance (Steady State) RJC [RJA] C/W (TYP.) Pkg. Code L F F2 R J W K M D V TO-220 Isolated TO-202 Type 1 Non-isolated TO-202 Type 2 Non-isolated TO-220 Non-isolated TO-218X Isolated TO-218X Non-isolated TO-218 Isolated TO-218 Non-isolated 4.0 [50] 4.3 [45] 9.5 [70] 3.4 3.9 1.8 [40] 1.5 2.0 3.0 3.4 1.6 1.45 1.7 1.5 1.4 1.6 N Type 1A 6A 8A 10 A 12 A 15 A 16 A 20 A 25 A 35 A 40 A 55 A 65 A 70 A TO-252 TO-251AA D-Pak V-Pak Surface Mount Non-isolated TO-263 D2Pak Non-isolated See below 1.7 2.3 [70] 2.5 1.3 1.3 2.4 2.35 1.0 1.0 0.70 0.70 0.6 0.6 0.5 0.53 0.86 0.53 0.5 0.86 0.60 Electrical Isolation Thermal Resistance (Steady State) RJC [RJA] C/W (TYP.) Package Code Type C Compak 35 * 1A * Mounted on 1cm2 Teccor's isolated SCR packages will withstand a minimum high potential test of 2500 V ac rms from leads to mounting tab over the device's operating temperature range. The following table shows standard and optional isolation ratings. E V AC RMS 2500 4000 TO-92 50 [145] TO-218 Isolated Standard Standard Standard Optional ** N/A N/A * UL Recognized File #E71639 ** For 4000 V isolation, use "V" suffix in part number. copper foil surface; two-ounce copper foil http://www.littelfuse.com +1 972-580-7777 Electrical Isolation * from Leads to Mounting Tab TO-220 TO-218X Isolated Isolated E6 - 6 (c)2004 Littelfuse, Inc. Thyristor Product Catalog Data Sheets SCRs CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 FREE AIR RATING 100 8 A TO-220 (Non-isolated) 6 A TO-220 (Isolated) and 6 A TO-202 (Types 1 and 3) 80 1.0 Normalized Peak Current Maximum Allowable Ambient Temperature (TA) - C 120 60 1 A TO-92 0.8 0.6 0.4 0.2 40 6 A TO-202 (Types 2 and 4) and 6 A TO-251 0 25 20 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 50 75 100 125 Case Temperature (TC) - C 1.6 1.8 2.0 2.2 RMS On-state Current [IT(RMS)] - Amps Figure E6.1 Maximum Allowable Ambient Temperature versus RMS On-state Current Figure E6.4 Peak Capacitor Discharge Current Derating (6 A through 55 A) 130 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 FREE AIR RATING 100 120 Maximum Allowable Case Temperature (TC) - C Maximum Allowable Ambient Temperature (TA) - C 120 8 A TO-220 (Non-isolated) 80 6 A TO-220 (Isolated) and 6 A TO-202 (Types 1 and 3) 1 A TO-92 60 40 110 100 1 A Devices 90 80 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 CASE TEMPERATURE: Measure as shown on dimensional drawing 70 60 6 A TO-202 (Types 2 and 4) and 6 A TO-251 50 0 20 0.2 0 0.4 0.6 0.8 1.0 1.2 0.2 1.4 0.4 0.6 0.8 1.0 1.2 RMS On-state Current [IT(RMS)] - Amps Average On-state Current [IT(AV)] - Amps Figure E6.5 Maximum Allowable Case Temperature versus RMS On-state Current (1 A) Figure E6.2 Maximum Allowable Ambient Temperature versus Average On-state Current 8 A TO-220 (Non-isolated) TO-251 and TO-252 120 1000 Maximum Allowable Case Temperature (TC) - C Peak Discharge Current (ITM) - Amps 130 55 A Devices 300 25 A Devices 200 15 A and 16 A Devices 100 6 A to 10 A Devices 12 A Devices ITM 50 110 90 8 A TO-220 (Isolated) and 8 A TO-202 80 70 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 CASE TEMPERATURE: Measure as shown on dimensional drawings 60 tw tw = 5 times constants 20 10 A TO-220 (Isolated) and 10 A TO-202 6 A Devices 100 50 0.5 1.0 2.0 5.0 10 20 50 0 Figure E6.3 Peak Capacitor Discharge Current (6 A through 55 A) (c)2004 Littelfuse, Inc. Thyristor Product Catalog 2 4 6 8 10 12 RMS On-state Current [IT(RMS)] - Amps Pulse Current Duration (tw) - ms Figure E6.6 Maximum Allowable Case Temperature versus RMS On-state Current (6 A, 8 A, and 10 A) E6 - 7 http://www.littelfuse.com +1 972-580-7777 SCRs Data Sheets Maximum Allowable Case Temperature (TC) - C 130 Maximum Allowable Case Temperature (TC) - C 130 120 16 A TO-220 (Non-isolated) and TO-263 110 10 A TO-220 (Non-isolated) 100 20 A TO-220 (Isolated) 10 A TO-251 and 10 A TO-252 90 12 A TO-220 (Non-isolated) TO-251 and TO-252 80 15 A TO-220 (Isolated) CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 CASE TEMPERATURE: Measure as shown on dimensional drawing 70 60 50 0 4 8 12 16 20 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 CASE TEMPERATURE: Measure as shown on dimensional drawings 120 110 65 A TO-218AC (Isolated) * 90 * The R, K or M package rating is intended only for high surge condition use and is not recommended for >50 A rms continuous current use, since narrow pin lead temperature can exceed PCB solder melting temperature. J or W packages are recommended for >50 A rms continuous current requirements. 80 70 60 50 RMS On-state Current [IT(RMS)] - Amps 55 A TO-218AC (Non-isolated) * 55 A TO-220 (Non-isolated) and TO-263 * 100 0 10 20 30 40 50 60 70 75 RMS On-state Current [IT(RMS)] - Amps Figure E6.10 Maximum Allowable Case Temperature versus RMS On-state Current (55 A and 65 A) Maximum Allowable Case Temperature (TC) - C Figure E6.7 Maximum Allowable Case Temperature versus RMS On-state Current (10 A, 12 A, 16 A, and 20 A) 130 Maximum Allowable Case Temperature (TC) - C 120 110 35 A TO-218 (Isolated) 25 A TO-220 (Isolated) 100 90 25 A TO-220 (Non-isolated) and TO-263 80 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 CASE TEMPERATURE: Measure as shown on dimensional drawings 70 60 50 0 4 8 12 16 20 24 28 32 36 130 120 110 100 1 A Devices 90 80 70 50 0 RMS On-state Current [IT(RMS)] - Amps Maximum Allowable Case Temperature (TC) - C Maximum Allowable Case Temperature (TC) - C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 CASE TEMPERATURE: Measure as shown on dimensional drawings 110 70 A TO-218X (Non-isolated) 65 A TO-218X (Isolated) 90 80 55 A TO-218X (Non-isolated) 70 40 A TO-220 (Non-isolated) and TO-263 60 50 0 10 20 30 40 50 60 70 0.6 0.8 130 12 A TO-220 (Non-isolated) and TO-251 and TO-252 120 10 A TO-251 10 A TO-252 110 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 CASE TEMPERATURE: Measure as shown on dimensional drawings 10 A TO-220 (Non-isolated) 6 A TO-220 6 A TO-202 10 A TO-220 (Isolated) and 10 A TO-202 6 A TO-251 6 A TO-252 100 8 A TO-220 (Isolated) 8 A TO-202 90 8 A TO-220 (Non-isolated) 80 0 1 2 3 4 5 6 7 8 Average On-state Current [IT(AV)] - Amps RMS On-state Current [IT(RMS)] - Amps Figure E6.9 Maximum Allowable Case Temperature versus RMS On-state Current (40 A through 70 A) http://www.littelfuse.com +1 972-580-7777 0.4 Figure E6.11 Maximum Allowable Case Temperature versus Average On-state Current (1 A) 130 100 0.2 Average On-state Current [IT(AV)] - Amps Figure E6.8 Maximum Allowable Case Temperature versus RMS On-state Current (25 A and 35 A) 120 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 CASE TEMPERATURE: Measure as shown on dimensional drawings 60 Figure E6.12 Maximum Allowable Case Temperature versus Average On-state Current (8 A, 10 A, and 12 A) E6 - 8 (c)2004 Littelfuse, Inc. Thyristor Product Catalog Data Sheets SCRs 130 130 O-2 20 (No n-is olat 110 ed) and CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 CASE TEMPERATURE: Measured as shown on dimensional drawings TO 100 -26 3 20 A TO-220 (Isolated) 90 80 10 A TO-220 (Non-isolated) 70 110 55 A TO-218AC (Non-isolated) * 100 2 4 80 * The R, K, or M package 6 8 10 12 50 14 65 A TO-218AC (Isolated) * rating is intended only for high surge condition use and is not recommended for >32 A (AV) continuous current use since narrow pin lead temperature can exceed PCB solder melting temperature. J or W packages are recommended for >32 A (AV) continuous current requirements. 60 15 A TO-220 (Isolated) 0 90 55 A TO-220 (Non-isolated) and TO-263 * 70 60 50 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 CASE TEMPERATURE: Measure as shown on dimensional drawings 120 Maximum Allowable Maximum Allowable Case Temperature (TC) - C 120 AT Case Temperature (TC) - C 16 0 10 Average On-state Current [IT(AV)] - Amps 20 30 40 50 Average On-state Current [IT(AV)] - Amps Figure E6.13 Maximum Allowable Case Temperature versus Average On-state Current (10 A through 20 A) Figure E6.16 Maximum Allowable Case Temperature versus Average On-state Current (55 A and 65 A) CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 CASE TEMPERATURE: Measure as shown on dimensional drawings 2.0 110 35 A TO-218 (Isolated) 100 90 INITIAL ON-STATE CURRENT = 200 mA dc for 1 A to 20 A Devices and 400 mA dc for 25 A to 70 A Devices 1.5 1.0 Ratio of 25A TO-220 (Isolated) IH (TC = 25 C) 120 IH Maximum Allowable Case Temperature (TC) - C 130 80 70 .5 25A TO-220 (Non-isolated) and TO-263 60 0 -40 50 0 .4 8 12 16 20 -15 +25 +65 +105 +125 Case Temperature (TC) - C 24 Average On-state Current [IT(AV)] - Amps Figure E6.17 Normalized dc Holding Current versus Case Temperature Figure E6.14 Maximum Allowable Case Temperature versus Average On-state Current (25 A and 35 A) 130 100 70 A TO-218X (Non-isolated) 40 A TO-220 (Non-isolated) and TO-263 90 IGT (TC = 25 C) 110 IGT 120 1.5 1.0 80 55 A TO-218X (Non-isolated) 70 Ratio of Maximum Allowable Case Temperature (TC) - C 2.0 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 CASE TEMPERATURE: Measure as shown on dimensional drawings 65 A TO-218X (Isolated) 60 0.5 0 50 0 10 20 30 40 -40 50 +25 +65 +105 +125 Case Temperature (TC) - C Average On-state Current [IT(AV)] - Amps Figure E6.15 Maximum Allowable Case Temperature versus Average On-state Current (40 A through 70 A) (c)2004 Littelfuse, Inc. Thyristor Product Catalog -15 Figure E6.18 Normalized DC Gate-Trigger Current versus Case Temperature E6 - 9 http://www.littelfuse.com +1 972-580-7777 SCRs Data Sheets 1.5 80 VGT (TC = 25 C) 25 A Devices TC = 25C 70 VGT 60 50 15 A to 20 A Devices 40 12 A Devices Ratio of Instantaneous On-state Current (iT) - Amps 90 30 6 A to 10 A Devices 20 1.0 0.5 10 0 1 A Devices -40 0 0 0.6 0.8 1.0 1.2 1.4 -15 +25 +65 +105 +125 Case Temperature (TC) - C 1.6 Instantaneous On-state Voltage (vT) - Volts Figure E6.19 Instantaneous On-state Current versus On-state Voltage (Typical) (6 A through 25 A) Figure E6.21 Normalized DC Gate-trigger Voltage versus Case Temperature 7 200 6 Turn-on Time (tgt) - s TC = 25C 160 Instantaneous On-state Current (iT) - Amps TC = 25C 6 A to 12 A Devices 180 140 65 A and 70 A Devices 120 100 80 55 A Devices 60 15 A to 35 A Devices 5 4 40 A to 70 A Devices 1 A Devices 3 2 40 1 20 35 A to 40 A Devices 0 0 .6 .8 1.0 1.2 1.4 0 1.6 10 Instantaneous On-state Voltage (vT) - Volts Figure E6.20 Instantaneous On-state Current versus On-state Voltage (Typical) (35 A through 70 A) http://www.littelfuse.com +1 972-580-7777 20 30 40 50 60 80 100 200 DC Gate Trigger Current (IGT) - mA Figure E6.22 Typical Turn-on Time versus Gate-trigger Current E6 - 10 (c)2004 Littelfuse, Inc. Thyristor Product Catalog SCRs Peak Surge (Non-repetitive) On-state Current (ITSM) - Amps Data Sheets 1000 800 600 500 400 300 65 A SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS ON-STATE CURRENT: [IT(RMS)]: MaxRated Value at Specified Case Temperature TO-2 18 70 A 35 A 200 25 A 16 A 100 80 60 50 40 30 10 A 55 A Devic es Devic Devic es Devic es es 40 A Devic es Devic 20 A es 15 A Devic es Devic es Devic es 12 A Devic es 8AD evice s 6A Dev ices 20 10 8 6 5 4 1A 3 2 Dev ices Notes: 1) Gate control may be lost during and immediately following surge current interval. 2) Overload may not be repeated until junction temperature has returned to steady-state rated value. 1 1 2 3 4 5 6 7 8 10 20 30 40 60 80100 200 300400 600 1000 Surge Current Duration - Full Cycles 18 CURRENT WAVEFORM: Half Sine Wave LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 Average On-state Power Dissipation [PD(AV)] - Watts Average On-state Power Dissipation [PD(AV)] - Watts Figure E6.23 Peak Surge Current versus Surge Current Duration 1.0 0.8 1.0 A Devices 0.6 0.4 0.2 0 CURRENT WAVEFORM: Half Sine Wave LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 16 14 15 A to 20 A Devices 12 12 A Devices 10 6 A to 10 A Devices 8 6 4 2 0 0 0.2 0.4 0.6 0.8 1.0 0 Figure E6.24 Power Dissipation (Typical) versus RMS On-state Current (1 A) (c)2004 Littelfuse, Inc. Thyristor Product Catalog 2 4 6 8 10 12 14 16 18 20 RMS On-state Current [IT(RMS)] - Amps RMS On-state Current [IT(RMS)] - Amps Figure E6.25 Power Dissipation (Typical) versus RMS On-state Current (6 A through 20 A) E6 - 11 http://www.littelfuse.com +1 972-580-7777 SCRs Data Sheets 60 16 es ic ev 12 0 22 8 25 A TO D 4 0 De vi c A 40 55 De an d 20 A Average On-state 35 es 50 s ice v 24 CURRENT WAVEFORM: Half Sine Wave LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 65 d A 70 es vic A De an A 28 30 40 CURRENT WAVEFORM: Half Sine Wave LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 Power Dissipation [PD(AV)] - Watts Average On-state Power Dissipation [PD(AV)] x- Watts 32 20 10 0 0 4 8 12 16 20 24 28 32 36 0 RMS On-state Current [IT(RMS)] - Amps Figure E6.26 Power Dissipation (Typical) versus RMS On-state Current (25 A and 35 A) http://www.littelfuse.com +1 972-580-7777 10 20 30 40 50 60 70 RMS On-state Current [IT(RMS)] - Amps Figure E6.27 Power Dissipation (Typical) versus RMS On-state Current (40 A through 70 A) E6 - 12 (c)2004 Littelfuse, Inc. Thyristor Product Catalog