SILICON SMALL SIGNAL
N-CHANNEL JFET
Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice.
Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However
Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to
verify that datasheets are current before placing orders.
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 7281
Issue 2
Page 1 of 2
2N4393
• High Speed Switching.
• Low On Resistance.
• Designed For High Reliability and Space Applications.
ABSOLUTE MAXIMUM RATINGS
(TA = 25°C unless otherwise stated)
VDS Drain – Source Voltage 40V
VGS Gate – Source Voltage -40V
VGD Gate – Drain Voltage -40V
IG Gate Current 50mA
PD Total Power Dissipation at TA = 25°C 300mW
Derate Above 25°C 2mW/°C
TJ Junction Temperature Range -55 to +175°C
Tstg Storage Temperature Range -65 to +200°C
ELECTRICAL CHARACTERISTICS
(TA = 25°C unless otherwise stated)
Symbols Parameters Test Conditions Min.
Typ. Max.
Units
V(BR)GSS Gate – Source
Breakdown Voltage VDS = 0V IG = 1.0µA -40
VGS(off) Gate – Source
Cut-off Voltage VDS = 20V ID = 1.0nA -0.5 -3
V
IDSS
(1)
Saturation
Drain Current VDS = 20V VGS = 0V 5 30 mA
VDS = 0V VGS = -20V -100 pA
IGSS Gate Reverse Current
TA = 150°C -200 nA
VDS = 20V VGS = -5V 100 pA
ID(off) Drain Cut-off Current
TA = 150°C 200 nA
VDS(on) Drain – Source
On Voltage VGS = 0V ID = 3mA 0.4 V
RDS(on) Drain – Source
On Resistance VGS = 0 ID = 1.0mA 100 Ω
SILICON SMALL SIGNAL
N-CHANNEL JFET
2N4393
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 7281
Issue 2
Page 2 of 2
DYNAMIC CHARACTERISTICS
Symbols Parameters Test Conditions Min.
Typ. Max.
Units
Ciss Common – Source
Input Capacitance
VDS = 20V
f = 1.0MHz
VGS = 0V
26
Crss Common – Source Reverse
Transfer Capacitance
VDS = 0V
f = 1.0MHz
VGS = -5V
5
pF
RDS(on) Drain – Source
On Resistance
VGS = 0
f = 1.0KHz ID = 0A 100 Ω
tr Rise Time 5
td(on) Turn-on Delay Time 15
tf Fall Time 30
td(off) Turn-off Delay Time
VDD = 10V
VGS = 0V
VGSX = -5V
ID(on) = 3mA
50
ns
(1) Pulse Width ≤ 380us, δ ≤ 2%
MECHANICAL DATA
Dimensions in mm (inches)
13 2
2.54 (0.100)
Nom.
0.48 (0.019)
0.41 (0.016)
dia.
5.84 (0.230)
5.31 (0.209)
4.95 (0.195)
4.52 (0.178)
5.33 (0.210)
4.32 (0.170)
12.7 (0.500)
min.
TO-18 (TO-206AA) METAL PACKAGE
Underside View
Pin 1 – Source Pin 2 – Drain Pin 3 - Gate
