ISO 9001 ISO 14001 AS 9100 CERTIFIED
Mini-Circuits
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661
The Design Engineers Search Engine Provides ACTUAL Data Instantly at
®
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
For detailed performance specs
& shopping online see web site
minicircuits.com
IF/RF MICROWAVE COMPONENTS
50Ω 5 to 500 MHz
Low Noise Amplifier
Plug-In
AMP-77+
CASE STYLE: PP120
PRICE: $60.45 ea. Qty. (1-9)
Outline Dimensions ( )
inch
mm
Maximum RatingsPin Connections
Features
RF IN 2
RF OUT 4
DC 1
GROUND 3
CASE GROUND 3
Operating Temperature -54°C to 85°C
Storage Temperature -55°C to 100°C
DC Voltage +17V Max.
Outline Drawing
Low Noise Amplifier Electrical Specifications
REV. A
M121747
AMP-77+
090826
Page 1 of 2
• low noise, 3.3 dB typ.
• high IP3, +32 dBm typ.
• hermetic, TO-8 can
MODEL
NO.
FREQUENCY
(MHz)
NOISE
FIGURE
(dB)
GAIN
(dB)
MAXIMUM
POWER
(dBm)
INTERCEPT
POINT
(dBm)
VSWR (:1)
Typ.
DC
POWER
Flatness Max.
fLfUTyp. Min. m
Total
Range
Output
(1 dB Compr.)
Input
(no damage)
IP3
Typ. In Out
Volt
(V)
Nom.
Current
(mA)
Max.
AMP-77+ 5 500 3.3 15 ±0.4 ±1.0 +16 +13 +32 2.0 2.0 15 56
Applications
• military, hi-rel applications
• small signal amplier
• VHF/UHF
m = mid range [2 fL to fU/2]
Open load is not recommended, potentially can cause damage.
With no load derate max input power by 20 dB
A B C D E F G wt
.50 .21 .15 .016 .020 .04 .300 grams
12.70 5.33 3.81 0.41 0.51 1.02 7.62 1.5
Permanent damage may occur if any of these limits are
exceeded.
+ RoHS compliant in accordance
with EU Directive (2002/95/EC)
The +Suffix has been added in order to identify RoHS
Compliance. See our web site for RoHS Compliance
methodologies and qualifications.