TPA Series Standard Products Superior high frequency characteristics make capacitors in the TPA series suitable for use in noise limiters and switching power supplies. TPA series will be discontinued production in the future. Please consider the following replacements for new adoption or model changes. TPB series(P.18 to 20) TPC series(P.14 to 16) Specifications Operating temperature range -55 to 105 Rated capacitance range120Hz/20 F 33 to 220 Capacitance tolerance120Hz/20 M:20 Rated voltageV.DC 4 to 10 Dissipation FactorD.F. 120Hz/20 8.0 0.1CV Leakage current (Rated voltage applied, after 5 minutes)A Equivalent series resistance Please see the attached characteristics list E.S.R.mmax. , 100kHz/20 Impedance ratio 100kHz/20 Endurance -55 Z/Z20 +105 Z/Z20 Within20 of the initial value D.F. 1.5 times the initial standard L.C. The initial standard C/C Within40, -20 of the initial value D.F. 1.5 times the initial standard L.C. 3 times the initial standard C/C Within5 of the initial value 60,90to95%RH,500h,No voltage applied Surge 0.6 to 1.0 C/C 105,2000h, rated voltage applied Damp heatSteady state 1.0 to 2.0 105,1000 cycles,1k,surge voltage applied D.F. The initial standard L.C. 3 times the initial standard Dimensions (unit: mm) Size CD3 size code L H W L W1 C 6.0 3.2 2.8 1.3 1.8 D3 7.3 4.3 3.1 1.3 2.4 Size List W 220 g2O RV SV F 4.0 6.3 10 5.0 8.0 13.0 33 C H 47 C 100 D3 150 S S 0.2 0.2 0.2 0.2 0.1 S W1 220 D3 D3 Characteristics list Size code C D3 SANYO Part number Rated Voltage V Rated Capacitance F D.F. %max. L.C. A max./5min. E.S.R. max. 100kHz/20 Maximum allowable ripple current mA rms 100kHz 10TPA33M 10.0 33 8.0 33.0 100 1000 6TPA47M 6.3 47 8.0 29.6 100 1000 10TPA100M 10.0 100 8.0 100.0 80 1200 6TPA150M 6.3 150 8.0 94.5 80 1200 4TPA220M 4.0 220 8.0 88.0 80 1200 100k to 500kHz,45 21