463 463-002 EMI/RFI Environmental G-Spring Backshell with Strain Relief Direct Coupling - Low Profile CONNECTOR DESIGNATORS * A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 6 DIRECT COUPLING 463 F S 002 M 16 05 F 6 Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series Connector Designator Strain Relief Style (F, G) Angle and Profile A = 90 B = 45 S = Straight Cable Entry (Table V) Shell Size (Table I) Finish (Table II) Basic Part No. 1.220 (31.0) Max Length * Length .060 (1.52) Min. Order Length 2.0 Inch (See Note 5) A Thread (Table I) Cable M Range (Table IV) B (Table I) STYLE 2 (STRAIGHT See Note 1) J (Table III) * Length .060 (1.52) Minimum Order Length 1.5 Inch (See Note 5) J (Table III) E (Table V) B (Table I) Shown with Style F Strain Relief F (Table V) G (Table V) B (Table I) H (Table V) 469-001-XX Shield Support Ring (order separately) is recommended for use in all G-Spring backshells (see page 463-8) Shown with Style F Strain Relief Shown with Style G Strain Relief N (Table IV) (c) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 463 - Page 4 463 463-002 EMI/RFI Environmental G-Spring Backshell with Strain Relief Direct Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F C J-H-L-S D-B-G-K 1.180(30.0) 1.440(36.6) 1.180(30.0) 1.440(36.6) 1.180(30.0) 1.440(36.6) 1.735(44.1) 1.180(30.0) 1.440(36.6) 1.915(48.6) 1.380(35.0) 1.560(39.6) 1.915(48.6) 1.380(35.0) 1.560(39.6) 1.915(48.6) 1.380(35.0) 1.560(39.6) 1.915(48.6) 1.380(35.0) 1.560(39.6) 1.915(48.6) 1.380(35.0) 1.560(39.6) 1.915(48.6) 1.610 (40.9) 1.560(39.6) 1.915(48.6) 1.610(40.9) 1.750(44.5) 1.915(48.6) 1.610(40.9) 1.750(44.5) 1.915(48.6) 1.610(40.9) 2.190(55.6) 1.915(48.6) Elbow Size 01 02 03 04 05 06 07 08 09 10 11 12 13 14 TABLE IV: CABLE ENTRY Cable Range N Dash M Max Max No. Max Min 01 .843 (21.4) .625 (15.9) .125 (3.2) .250 (6.4) .968 (24.6) .750 (19.1) .156 (4.0) .375 (9.5) 02 03 1.046 (26.6) .875 (22.2) .250 (6.4) .438 (11.1) 04 1.156 (29.4) 1.000 (25.4) .280 (7.1) .500 (12.7) 05 1.218 (30.9) 1.125 (28.6) .375 (9.5) .625 (15.9) 06 1.343 (34.1) 1.250 (31.8) .500 (12.7) .750 (19.1) 07 1.468 (37.3) 1.375 (34.9) .625 (15.9) .875 (22.2) 08 1.593 (40.5) 1.500 (38.1) .750 (19.1) 1.000 (25.4) 09 1.718 (43.6) 1.625 (41.3) .875 (22.2) 1.125 (28.6) 10 1.843 (46.8) 1.750 (44.5) 1.000 (25.4) 1.250 (31.8) 11* 2.187 (55.5) 1.875 (47.6) 1.125 (28.6) 1.375 (34.9) 12* 2.312 (58.7) 2.000 (50.8) 1.250 (31.8) 1.500 (38.1) 13* 2.437 (61.9) 2.125 (54.0) 1.375 (34.9) 1.625 (41.3) 14* 2.546 (64.7) 2.250 (57.2) 1.500 (38.1) 1.750 (44.5) * Consult factory for availability TABLE V: ELBOW DIMENSIONS F G E Max Max Max 1.720 (43.7) .636 (16.2) .630 (16.0) 1.720 (43.7) .710 (18.0) .630 (16.0) 1.780 (45.2) .734 (18.6) .692 (17.6) 1.870 (47.5) .825 (21.0) .755 (19.2) 1.980 (50.3) .848 (21.5) .988 (25.1) 2.170 (55.1) 1.087 (27.6) 1.036 (26.3) 2.170 (55.1) 1.087 (27.6) 1.036 (26.3) 2.320 (58.9) 1.325 (33.7) 1.130 (28.7) 2.320 (58.9) 1.130 (28.7) 1.325 (33.7) 2.370 (60.2) 1.255 (31.9) 1.337 (34.0) 2.470 (62.7) 1.317 (33.5) 1.827 (46.4) 2.470 (62.7) 1.317 (33.5) 1.827 (46.4) 1.348 (34.2) 2.560 (65.0) 2.027 (51.5) 2.560 (65.0) 1.348 (34.2) 2.027 (51.5) H Max 1.670 (42.4) 1.790 (45.5) 1.810 (46.0) 1.880 (47.8) 1.970 (50.0) 2.140 (54.4) 2.140 (54.4) 2.250 (57.2) 2.250 (57.2) 2.420 (61.5) 2.670 (67.8) 2.670 (67.8) 2.670 (67.8) 2.670 (67.8) 1. 2. 3. 4. Shield Support Ring (469-001-XX) is recommended for use in all G-Spring backshells (see page 463-8). When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. Angular Function S only. Metric dimensions (mm) are indicated in parentheses. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 5. Consult factory for shorter lengths on straight backshells. 6. When using Connector Designator B refer to pages 18 and 19 for part number development. (c) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 463 - Page 5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Glenair: 463AS002N3207F4 463AS002NF1205F3 463AS002NF1405F3 463AS002NF2006F3 463BS002NF1405F3A 463BS002NF1505F3A 463CS002NF2005F5 463DS002B1402F4 463DS002B1604F4 463DS002B1606F4 463DS002UC1405F3 463DS002UC1806F3 463FS002L1604F3 463FS002L2004F3 463HS002M1505F6 463HS002NF0901F3 463HS002NF1501F3 463KS002N2408F4C 463HS002NF2306F5 463BS002N1704F4A 463DS002UC2006F3 463DS002UC2205F3 463CS002NF2008F5 463AS002UC2205F3 463BS002UC1604F3A 463DS002N2206F6C 463DS002UC1403F3 463FS002N1402F6C 463HS002M1505F3-521 463DS002UC2008F3 463DS002UC2408F3 463AS002M2005F3 463AS001M1002G3 463DA002UC1405F 463DS002UC1205F4 463AS002NF1604F3