SMF120AG - ON Semiconductor - Datasheet.Directory

August, 2005 − Rev. 1 1Publication Order Number:

SMF5.0AT1/D

SMF5.0AT1 Series

Zener Transient

Voltage Suppressor

SOD−123 Flat Lead Package

The SMF5.0A Series is designed to protect voltage sensitive

components from high voltage, high energy transients. Excellent

clamping capability, hi gh surge c apability, low zener i mpedance a nd

fast response time. Because of its small size, it is ideal for use in

cellular phones, p ortabl e d evi ces, b us iness m achines, p ower supplies

and many other industrial/consumer applications.

Features

•Stand−off Voltage: 5 − 170 Volts

•Peak Power − 200 Watts @ 1 ms (SMF5.0A − SMF58A)

− 175 Watts @ 1 ms (SMF60A − SMF170A)

•Maximum Clamp Voltage @ Peak Pulse Current

•Low Leakage

•Response Time is Typically < 1 ns

•ESD Rating of Class 3 (> 16 kV) per Human Body Model

IEC61000−4−2 Level 4 ESD Protection

IEC61000−4−4 40 A ESD Protection

•Low Profile − Maximum Height of 1.0 mm

•Small Footprint − Footprint Area of 8.45 mm2

•Supplied in 8 mm Tape and Reel − 3,000 Units per Reel

•Cathode Indicated by Polarity Band

•Lead Orientation in Tape: Cathode Lead to Sprocket Holes

•Pb−Free Packages are Available

Mechanical Characteristics:

CASE: Void-free, transfer-molded, thermosetting plastic

Epoxy Meets UL 94 V−0

LEAD FINISH: 100% Matte Sn (Tin)

MOUNTING POSITION: Any

QUALIFIED MAX REFLOW TEMPERATURE: 260°C

Device Meets MSL 1 Requirements

PLASTIC SURFACE MOUNT

ZENER OVERVOLTAGE

TRANSIENT SUPPRESSOR

5 − 170 VOLTS

200 WATT PEAK POWER

Device Package Shipping†

ORDERING INFORMATION

SMFxxxAT1 SOD−123FL 3000/Tape & Ree

1: CATHODE

2: ANODE

http://onsemi.com

SOD−123FL

CASE 498

PLASTIC

MARKING DIAGRAM

CATHODE 2

ANODE

See specific marking information in the device marking

column of the Electrical Characteristics table on page 3 o

this data sheet.

DEVICE MARKING INFORMATION

SMFxxxAT1G SOD−123FL

(Pb−Free) 3000/Tape & Ree

† For information on tape and reel specifications,

including part orientation and tape sizes, please

refer t o our Tape and Reel Packaging Specification

Brochure, BRD8011/D.

xx = Device Code (Refer to page 3)

M = Date Code

G= Pb−Free Package

(Note: Microdot may be in either location)

xx M G

Uni−Directional TVS

IPP

VRWM

VCVBR VF

SMF5.0AT1 Series

http://onsemi.com

MAXIMUM RATINGS

Rating Symbol Value Unit

Maximum Ppk Dissipation (PW−10/1000 ms) (Note 1) SMF60A − SMF170A Ppk 175 W

Maximum Ppk Dissipation (PW−10/1000 ms) (Note 1) SMF5.0A − SMF58A Ppk 200 W

Maximum Ppk Dissipation @ TA = 25°C, (PW−8/20 ms) (Note 2) Ppk 1000 W

DC Power Dissipation @ TA = 25°C (Note 3)

Derate above 25°C

Thermal Resistance, Junction−to−Ambient (Note 3)

°PD°

RqJA

385

4.0

325

°mW

mW/°C

°C/W

Thermal Resistance, Junction−to−Lead (Note 3) RqJcathode 26 °C/W

Operating and Storage Temperature Range TJ, Tstg −55 to +150 °C

Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit

values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,

damage may occur and reliability may be affected.

1. Non−repetitive current pulse at TA = 25°C, per waveform of Figure 2.

2. Non−repetitive current pulse at TA = 25°C, per waveform of Figure 3.

3. Mounted with recommended minimum pad size, DC board FR−4.

ELECTRICAL CHARACTERISTICS (TA = 25°C unless

otherwise noted, VF = 3.5 V Max. @ IF (Note 4) = 12 A)

Symbol Parameter

IPP Maximum Reverse Peak Pulse Current

VCClamping Voltage @ IPP

VRWM Working Peak Reverse Voltage

IRMaxim um Revers e Leakage Current @ VRWM

VBR Breakdown Voltage @ IT

ITTest Current

IFForward Current

VFForward Voltage @ IF

4. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms,

duty cycle = 4 pulses per minute maximum.

SMF5.0AT1 Series

http://onsemi.com

ELECTRICAL CHARACTERISTICS (TL = 30°C unless otherwise noted, VF = 1.25 Volts @ 200 mA)

Device* Marking

VRWM (V) VBR @ IT (V) (Note 6) ITIR @ VRWM VC(Max) IPP(Max) (A)

(Note 5) Min Nom Max (mA) (mA) (V) (Note 7)

SMF5.0A, G KE 5 6.4 6.7 7 10 400 9.2 21.7

SMF6.0A, G KG 6 6.67 7.02 7.37 10 400 10.3 19.4

SMF6.5A, G KK 6.5 7.22 7.6 7.98 10 250 11.2 17.9

SMF7.0A, G KM 7 7.78 8.2 8.6 10 100 12 16.7

SMF7.5A, G KP 7.5 8.33 8.77 9.21 1 50 12.9 15.5

SMF8.0A, G KR 8 8.89 9.36 9.83 1 25 13.6 14.7

SMF8.5A, G KT 8.5 9.44 9.92 10.4 1 10 14.4 13.9

SMF9.0A, G KV 9 10 10.55 11.1 1 5 15.4 13.0

SMF10A, G KX 10 11.1 11.7 12.3 1 2.5 17 11.8

SMF11A, G KZ 11 12.2 12.85 13.5 1 2.5 18.2 11.0

SMF12A, G LE 12 13.3 14 14.7 1 2.5 19.9 10.1

SMF13A, G LG 13 14.4 15.15 15.9 1 1 21.5 9.3

SMF14A, G LK 14 15.6 16.4 17.2 1 1 23.2 8.6

SMF15A, G LM 15 16.7 17.6 18.5 1 1 24.4 8.2

SMF16A, G LP 16 17.8 18.75 19.7 1 1 26 7.7

SMF17A, G LR 17 18.9 19.9 20.9 1 1 27.6 7.2

SMF18A, G LT 18 20 21 22.1 1 1 29.2 6.8

SMF20A, G LV 20 22.2 23.35 24.5 1 1 32.4 6.2

SMF22A, G LX 22 24.4 25.6 26.9 1 1 35.5 5.6

SMF24A, G LZ 24 26.7 28.1 29.5 1 1 38.9 5.1

SMF26A, G ME 26 28.9 30.4 31.9 1 1 42.1 4.8

SMF28A, G MG 28 31.1 32.8 34.4 1 1 45.4 4.4

SMF30A, G MK 30 33.3 35.1 36.8 1 1 48.4 4.1

SMF33A, G MM 33 36.7 38.7 40.6 1 1 53.3 3.8

SMF36A, G MP 36 40 42.1 44.2 1 1 58.1 3.4

SMF40A, G MR 40 44.4 46.8 49.1 1 1 64.5 3.1

SMF43A, G MT 43 47.8 50.3 52.8 1 1 69.4 2.9

SMF45A, G MV 45 50 52.65 55.3 1 1 72.7 2.8

SMF48A, G MX 48 53.3 56.1 58.9 1 1 77.4 2.6

SMF51A, G MZ 51 56.7 59.7 62.7 1 1 82.4 2.4

SMF54A, G NE 54 60 63.15 66.3 1 1 87.1 2.3

SMF58A, G NG 58 64.4 67.8 71.2 1 1 93.6 2.1

SMF60A, G NK 60 66.7 70.2 73.7 1 1 96.8 1.8

SMF64A, G NM 64 71.1 74.85 78.6 1 1 103 1.7

SMF70A, G NP 70 77.8 81.9 86 1 1 113 1.5

SMF75A, G NR 75 83.3 87.7 92.1 1 1 121 1.4

SMF78A, G NT 78 86.7 91.25 95.8 1 1 126 1.4

SMF85A, G NV 85 94.4 99.2 104 1 1 137 1.3

SMF90A, G NX 90 100 105.5 111 1 1 146 1.2

SMF100A, G NZ 100 111 117 123 1 1 162 1.1

SMF110A, G PE 110 122 128.5 135 1 1 177 1.0

SMF120A, G PG 120 133 140 147 1 1 193 0.9

SMF130A, G PK 130 144 151.5 159 1 1 209 0.8

SMF150A, G PM 150 167 176 185 1 1 243 0.7

SMF160A, G PP 160 178 187.5 197 1 1 259 0.7

SMF170A, G PR 170 189 199 209 1 1 275 0.6

5. A transient suppressor is normally selected according to the Working Peak Reverse Voltage (VRWM) which should be equal to or greater

than the DC or continuous peak operating voltage level.

6. VBR measured at pulse test current IT at ambient temperature of 25°C.

7. Surge current waveform per Figure 2 and derate per Figure 3.

*The “G’’ suffix indicates Pb−Free package available.

SMF5.0AT1 Series

http://onsemi.com

tP, PULSE WIDTH (ms)

100

1000

10,000

1.0 10 100

10 01234

100

t, TIME (ms)

VALUE (%)

HALF VALUE − IRSM

PEAK VALUE − IRSM

TYPICAL PROTECTION CIRCUIT

Vin VL

Zin

LOAD

PULSE WIDTH (tP) IS DEFINED

AS THAT POINT WHERE THE PEAK

CURRENT DECAYS TO 50%

OF IRSM.

Figure 1. Pulse Rating Curve Figure 2. 10 X 1000 ms Pulse Waveform

1000 10,000

Figure 3. 8 X 20 ms Pulse Waveform

, PEAK POWER (WATTS)

tr≤ 10 ms

100

00 25 50 75 100 125 15

TA, AMBIENT TEMPERATURE (°C)

120

140

160

Figure 4. Pulse Derating Curve

PEAK PULSE DERATING IN % OF

PEAK POWER OR CURRENT @ TA = 25°C

100

0020406080

t, TIME (ms)

% OF PEAK PULSE CURRENT

PULSE WIDTH (tP) IS DEFINED

AS THAT POINT WHERE THE

PEAK CURRENT DECAY = 8 ms

PEAK VALUE IRSM @ 8 ms

HALF VALUE IRSM/2 @ 20 ms

SMF5.0AT1 Series

http://onsemi.com

1.2

1.0

0.8

0.6

0.4

0.2

0−55 25 85 150

T, TEMPERATURE (°C)

V , TYPICAL FORW ARD VOLTAGE (VOLTS)

25 50 75 100 125 175

2.5

1.5

T, TEMPERATURE (°C)

P , MAXIMUM POWER DISSIPATION (W)

0.5

150

1000

100

11 10 1000

WORKING PEAK REVERSE VOLTAGE (VOLTS)

C, CAPACITANCE (pF)

MEASURED @ 50% VRWM

MEASURED @ ZERO BIAS

Figure 5. Typical Derating Factor for Duty Cycle

DERATING FACTOR

1 ms

10 ms

0.7

0.5

0.3

0.05

0.1

0.2

0.01

0.02

0.03

0.07

100 ms

0.1 0.2 0.5 2 5 10 501 20 100

D, DUTY CYCLE (%)

PULSE WIDTH

10 ms

Figure 6. Steady State Power Derating

Figure 7. Forward Voltage Figure 8. Capacitance versus Working Peak

Reverse Voltage

100

SMF5.0AT1 Series

http://onsemi.com

PACKAGE DIMENSIONS

SOD−123FL

CASE 498−01

ISSUE A

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M,

1982.

2. CONTROLLING DIMENSION: MILLIMETER.

3. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH.

4. DIMENSIONS D AND J ARE TO BE MEASURED ON FLAT

SECTION OF THE LEAD: BETWEEN 0.10 AND 0.25 MM

FROM THE LEAD TIP.

POLARITY INDICATOR

OPTIONAL AS NEEDED

DIM

AMIN NOM MAX MIN

MILLIMETERS

0.90 0.95 1.00 0.035

INCHES

A1 0.00 0.05 0.10 0.000

b0.70 0.90 1.10 0.028

c0.10 0.15 0.20 0.004

D1.50 1.65 1.80 0.059

E2.50 2.70 2.90 0.098

L0.55 0.75 0.95 0.022

0.037 0.039

0.002 0.004

0.035 0.043

0.006 0.008

0.065 0.071

0.106 0.114

0.030 0.037

NOM MAX

3.40 3.60 3.80 0.134 0.142 0.150

HE− −

0°8°0°8°

ÉÉÉÉ

inches

0.91

0.036

1.22

0.048

2.36

0.093

4.19

0.165

*For additional information on our Pb−Free strategy and soldering

details, please download the ON Semiconductor Soldering and

Mounting Techniques Reference Manual, SOLDERRM/D.

SOLDERING FOOTPRINT*

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All

operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights

nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should

Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its of ficers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Japan: ON Semiconductor, Japan Customer Focus Center

2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051

Phone: 81−3−5773−3850

SMF5.0AT1/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 61312, Phoenix, Arizona 85082−1312 USA

Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada

Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: http://onsemi.com

Order Literature: http://www.onsemi.com/litorder

For additional information, please contact your

local Sales Representative.