P Vishay Sfernice High Precision Wraparound Thin Film Chip Resistors Pb-free FEATURES Available * Load Life Stability at 70 C For 2000 hours: RoHS* 0.1% under Pn/0.05% under Pd COMPLIANT * Low Temperature Coefficient down to 10 ppm/C * Very Low Noise < 35 dB and Voltage Coefficient < 0.01 ppm/V * Resistance Range : 10 to 3 M depending on size * Extended Ohmic Value Range (see table) * Tolerances to 0.01 % * In Lot Tracking 5 ppm/C * Termination: Thin Film Technology * Gold Plated or Pre-tinned Terminations over Nickel Barrier * Short Circuits (Jumpers) r < 50 mR, I < 2 A For low noise and precision applications, superior stability, low temperature coefficient of resistance, and low voltage coefficient, VISHAY SFERNICE's proven precision thin film wraparound resistors exceed requirements of MIL-PRF-55342G characteristics Y ( 10 ppm/C). DIMENSIONS in millimeters (inches) A D D B C E E CASE SIZE 0402 0505 0603 0705 0805 1005 1206 1505 2010 A MAX. TOL. + 0.152 (0.006) MIN. TOL. - 0.152 (- 0.006) 1.00 (0.040) 1.35 (0.053) 1.52 (0.060) 1.91 (0.075) 2.54 (0.100) 3.06 (0.120) 3.81 (0.150) 5.08 (0.200) DIMENSION B C MAX. TOL. MAX. TOL. + 0.127 (0.005) + 0.127 (0.005) MIN. TOL. MIN. TOL. - 0.127 (- 0.005) - 0.127 (- 0.005) 0.5 (0.02) 0.6 (0.023) 0.5 (0.02) 1.27 (0.050) 0.5 (0.02) 0.75 (0.030) 0.5 (0.02) 1.27 (0.050) 0.5 (0.02) 0.5 (0.02) 0.5 (0.02) 0.5 (0.02) 1.27 (0.050) 1.60 (0.063) 1.32 (0.054) 2.54 (0.100) POWER RATING mW LIMITING ELEMENT VOLTAGE D/E MAX. TOL. + 0.13 (0.005) MIN. TOL. - 0.13 (- 0.005) 0.38 (0.015) 0.38 (0.015) 0.38 (0.015) 0.38 (0.015) Pn 50 125 125 200 Pd 37 50 75 100 V 37 50 50 50 0.38 (0.015) 0.38 (0.015) 0.38 (0.015) 0.38 (0.015) 250 330 350 1000 125 150 175 500 75 75 75 100 RESISTANCE RANGE (SEE BELOW FOR EXTENDED RANGE) 10 to 50 k 10 to 260 k 10 to 260 k 10 to 300 k 10 to 500 k 10 to 1 M 10 to 500 k 10 to 3 M EXTENDED OHMIC VALUE RANGE FOR HIGH PRECISION WRAPAROUND THIN FILM CHIP RESISTORS SIZE TIGHTEST TOLERANCE % EXTENDED OHMIC VALUE RANGE BEST TCR (PPM/C) 0402 0.05 0.1 0.05 0.1 0.05 0.1 0.05 0.1 0.05 0.25 50 k - 100 k 100 k - 1 M 250 k - 300 k 300 k - 2 M5 300 k - 500 k 500 k - 5 M 1M-2M 2 M - 15 M 3M-6M 6 M - 50 M 25 50 25 50 25 50 25 50 25 50 0505 0603 0705 0805 1206 2010 Using special NiCr and CrSi alloys we are able to extend the ohmic value range as indicated above * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 2 For technical questions, contact sfer@vishay.com Document Number: 53017 Revision 18-Apr-06 P Vishay Sfernice % RATED POWER High Precision Wraparound, Thin Film Chip Resistors ELECTRICAL SPECIFICATIONS Resistance Range: 10 to 3 M Resistance Tolerance: 0.1 % to 5 % 0.01 % to 0.05 % on Y type Power Dissipation: 100 60 Pn: 50 mW to 1 W Pd: 37 mW to 500 mW on tolerance tighter than 0.05 % 40 20 Temperature Coefficient: see table below 0 0 MECHANICAL SPECIFICATIONS Substrate: Film: Silicon Terminations: B type: SnPb over nickel barrier for solder reflow N type: SnAg over nickel barrier G type: gold over nickel barrier for other applications CLIMATIC SPECIFICATIONS - 55 C to + 155 C 100 120 140 155 Several types of packaging are available: tube, waffle-pack and tape and reel. SIZE 0402 0505 0603 0805 0705 1005 1206 1505 2010 NUMBER OF PIECES PER PACKAGE WAFFLE TAPE AND REEL TUBE PACK MIN. MAX. 2" X 2" 500 TAPE WIDTH 8 mm 100 100 4000 100 2000 140 500 60 100 8 mm* * 12 mm on request For temperature up to 200 C, please consult factory BEST TOL. AND TCR V RESISTANCE VALUE TEMPERATURE COEFFICIENT OHMIC VALUES TCR ppm/C C R > 10 25 0.10 % B R > 25 20 0.05 % W R > 50 0.02 % P R > 100 0.01 % L R > 250 CODE FILM TIGHTEST CODE TOLERANCE 10 ppm/C* Y Ni Cr 0.25 % 25 ppm/C E Ni Cr 50ppm/C H Ni Cr or Ta2N 100 ppm/C K Ni Cr or Ta2N TCR 60 70 80 PACKAGING Nickel Chromium with mineral passivation or Ta2N Protection: Operating Temp. Range: 40 POWER DERATING CURVE Thin Film 1.27 (0.050) 20 AMBIENT TEMPERATURE IN C Alumina Technology: 80 * R > 50 on request for lower values 10 PERFORMANCE TESTS Thermal Shock Short Time Overload Low Temperature Operation Resistance To Solder Heat Moisture Resistance High Temperature Load Life CONDITIONS MIL - PRF - 55342G MIL-Std-202 F -Method 107 F MIL - PRF - 55342G Para 3.10.4.7.5 MIL - PRF - 55342G Para 3.9 & 4.7.4 MIL - PRF - 55342G Para 3.12, 4.7.7, 4.7.1.2 MIL - PRF - 55342G Para 3.13 & 4.7.8 MIL-Std-202 F-Method 106 E MIL - PRF - 55342G Para 3.11 & 4.7.6 MIL - PRF - 55342G 2000 hours Pn at 70C MIL-Std-202 F -Method 108 A Ta2N DRIFTS Ni Cr Typical Typical MIL-PRFMIL-PRF-55342G performances 55342G Requirements performances 0.25 % 0.02 % 0.05 % 0.02 % 0.10 % 0.01 % 0.05 % 0.01 % 0.25 % 0.01 % 0.05 % 0.01 % 0.25 % 0.04 % 0.05 % 0.03% 0.40 % 0.01 % 0.10 % 0.01 % 0.20 % 0.075 % 0.05 % 0.05 % 0.50 % 0.15 % 0.5 % 0.10 %* * 0.05 % under Pd Document Number: 53017 Revision 18-Apr-06 For technical questions, contact sfer@vishay.com www.vishay.com 3 P Vishay Sfernice High Precision Wraparound, Thin Film Chip Resistors GLOBAL PART NUMBER INFORMATION New Global Part Numbering: P0505Y1003BBT0933 P GLOBAL MODEL SIZE 0402 0505 0603 0705 0805 1005 1206 1505 2010 Historical Part Number example: P 0 5 0 5 TCR K = 100 ppm/C H = 50 ppm/C E = 25 ppm/C Y = 10 ppm/C X = Jumper Z = 5 ppm (0.70 C) 0505 Y 1003 Y 1 0 0 VALUE The first three digits (2 digits are enough for tolerance G and J) are significant figures and the last digit specifies the number of zero to follow, R designates decimal point 10 R0 = 10 3901 = 3900 1004 = 1 M 0R00 = Jumper B B TR 3 B TOL L = 0.01 % P = 0.02 % W = 0.05 % B = 0.1 % C = 0.25 % D = 0.5 % F = 1% G = 2% J = 5% S Special X = Jumper B T 0 9 3 3 Tape SPECIAL TERMINATION B: SnPb over nickel barrier B: lead bearing version N: SnAg over nickel barrier N and G: lead (Pb)-free/ G: gold over RoHS version nickel barriere R0933 Chips ready to be trimmed available. (Ptrim) - Please consult Sfernice. www.vishay.com 4 For technical questions, contact sfer@vishay.com Document Number: 53017 Revision 18-Apr-06 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1