3-1393143-8 - TE CONNECTIVITY - Datasheet.Directory

468

10-2012, Rev. 1012

www.te.com

a TE Connectivity Ltd. company.

Catalog and product speciﬁcation according

to IEC 61810-1 and to be used only together

with the ‘Deﬁnitions’ section.

Catalog and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Catalog product data, ‘Deﬁnitions’ section,

application notes and all speciﬁcations are

subject to change.

Potter & Brumﬁeld

n Sockets for 1 - 3 pole relays with .187” (4/75mm) quick connects

or 4 pole relays with .110” (2.79mm) quick connects

n Solder, PCB or screw terminal sockets

n Hold down springs

n Various mounting options

Approvals

UL E59244, CSA LR15734

Technical data of approved types on request.

Technical Data

Socket contact material

Spring brass, tin plated

Socket body material

Solder, PCB and QC terminal models

Nylon

Screw terminal models - 3 pole

Glass-ﬁlled polyester

Screw terminal model - 4 pole Combination (PCB assembly)

Maximum current

Screw terminal model - 4 pole

10A

All other models 15A

Product

Code

Poles Terminal

type

Mounting Rating Part

number

27E043 3 solder hard mount 15A 1393143-1

27E067 .187 in (4.75)

quick connect

1393143-2

27E046 PCB .144 in

(3.66) long

1419106-4

27E305 PCB .184 in

(4.67) long

3-1393143-2

27E419 4 PCB .156 in

(3.96) long

4-1393143-0

27E396 3 .187 in (4.75)

quick connect

snap-in 3-1393143-8

27E121 screw panel/rail 1393143-5

27E893 DIN-rail 2-1419106-5

27E867 4 panel-rail 10A 2-1419106-2

Caution: Printed circuit sockets are manufactured with "ﬂoating" (Loose) terminals. This

permits them to align with holes in the circuit board and with the relay terminals. During

the mounting and soldering of the socket, vertical ﬂoat should be eliminated and the

terminals seated on the board. (This may be accomplished by inserting a dummy relay in

the socket.) Failure to eliminate ﬂoat may cause fracture of the solder joint or separation of

the copper conductor from the printed circuit board when a relay is inserted in the socket

after soldering.

Ordering Code for Sockets

Dimensions

Recommended Chassis Thickness

.031 (.79) to .062 (1.57)

Recommended chassis cutout

for solder terminal socket

PC board layout for 3 pole

PCB terminal socket

All accessories must be ordered separately.

Hard Mount Sockets For Relays Through 3 Poles

Sockets with .187” (4.75mm) quick connect, solder or printed circuit terminals are avail-

able for KUEP, KUGP, KUIP, KUL, KUMP and KUP relays, through 3 poles, with .187”

(4.75mm) quick connect terminals. Also used with CL/CU time delay relays.

27E043–with solder eyelet terminals.

27E067–with .187” (4.75mm) quick connect

terminals.

1.370

(34.80)

1.50

(38.1)

2.03

(51.56)

.50 TYP.

(12.7)

.165 DIA.

(4.19)

2 HOLES

1.375

(34.93)

.875 ± .010

(22.23 ± .25)

1.687 ± .010

(42.85 ± .25)

1.250

(31.75)

.125

(3.18)

.297

(7.54) .250

(6.35)

.34 MAX.

(8.64)

1.395

(35.43)

.875

(22.23)

.110

(2.79)

4 PLACES

1.270

(32.26)

1.687

(42.85)

.208

(5.28)

.156 DIA.

(3.96)

2 HOLES

.260

(6.60)

.437

(11.10)

.875

(22.23)

.218

(5.54)

.328

(8.33)

1.687

(42.85)

1.076

(27.33)

.156 TYP.

(3.96)

.626

(15.90)

.090 TYP.

(2.29)

.180 TYP.

(4.57)

.076 DIA.

(1.93)

General Purpose

Accessories

Sockets & Accessories, KUP Relays

469

10-2012, Rev. 1012

www.te.com

a TE Connectivity Ltd. company.

Catalog and product speciﬁcation according

to IEC 61810-1 and to be used only together

with the ‘Deﬁnitions’ section.

Catalog and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Catalog product data, ‘Deﬁnitions’ section,

application notes and all speciﬁcations are

subject to change.

Potter & Brumﬁeld

Dimensions

Recommended chassis cutout

snap-in socket

Snap-in Socket For Relays Through 3 Poles

Socket with with .187” (4.75mm) quick connect terminals is available for KUEP, KUGP,

KUIP, KUL, KUMP and KUP relays, through 3 poles, with .187” (4.75mm) quick connect

terminals. Also used with CL/CU time delay relays.

27E396–with .187” (4.75mm) quick connect terminals

1.375

(34.93)

.239

(6.07)

1.260

(32.0 0)

.396

(10.06)

.020

(.51) .065 TYP.

(1.65)

.281

(7.14)

1.395

(35.43)

1.270

(32.26)

Recommended chassis thickness

.031" (.79mm) to .062" (1.57mm).

Caution: Printed circuit sockets are manufactured with "ﬂoating" (Loose) terminals. This

permits them to align with holes in the circuit board and with the relay terminals. During

the mounting and soldering of the socket, vertical ﬂoat should be eliminated and the

terminals seated on the board. (This may be accomplished by inserting a dummy relay in

the socket.) Failure to eliminate ﬂoat may cause fracture of the solder joint or separation of

the copper conductor from the printed circuit board when a relay is inserted in the socket

after soldering.

PC board layout for 4 pole

PCB terminal socket

Hard mount sockets for relays with 4 poles

Socket with printed circuit terminals is available for KUP relays, with 4 poles, with .110”

(2.79mm) quick connect terminals. 27E043–with solder eyelet terminals.

27E419–with printed circuit terminals.

.50 TYP.

(12.7)

1.687

(42.85)

2.03

(51.6)

.875

(22.23)

1.50

(38.1)

1.370

(34.80)

.125

(3.18)

.297

(7.54) .250

(6.35)

.461 MAX.

(11.71)

1.250

(31.75)

.060 TYP.

(1.52)

.165 ± .005

(4.19 ± .13)

2 HOLES

.328

(8.33)

.510

(12.95)

.170

(4.32)

.076 DIA. TYP.

(1.93)

.626

(15.90)

.340

(8.64)

1.020

(25.91)

.206

(5.23)

Screw terminal socket for relays through 3 poles 27E121

Offers screw termination for KUEP, KUGP, KUIP, KUL, KUMP and KUP relays, through 3

poles, with .187” (4.75mm) quick connect terminals. Also used with CL/CU time delay

relays. This socket stacks on 1.700” (43.18mm) centers. When surface mounting, two

#6-32 screws of suitable length are required. When track mounting, two 24A071 retainer

clips (not shown) are required.

Screw terminal, DIN rail, snap-mount socket 27E893

Offers screw termination for KUEP, KUGP, KUIP, KUL, KUMP and KUP relays, through 3

poles, with .187” (4.75mm) quick connect terminals. Also used with CL/CU time delay

relays. This socket is constructed with a spring-loaded latch which allows it to be quickly

snapped onto or removed from a DIN or “top hat” style mounting track. No special tools or

extra hardware is required for installation.

.156 TYP.

(3.96)

1.450 MAX.

(36.83)

1.900 MAX.

(48.26)

3.150 MAX.

(80.01)

#6-32 SCREWS &

CAPTIVE WASHERS

1.500

(38.10)

.895 MAX.

(22.73)

1.550 ± .010

(39.37 ± .25)

1.700 ± .010

(43.18 ± .25)

6 5 4

3 2 1

9 8 7

3.000

(76.20)

1.703

(43.26)

.390

(9.91)

.156 TYP.

(3.96)

1.550

(39.37)

.317 TYP.

(8.04)

1.500

(38.10)

654

321

987

1.030

(26.16)

General Purpose

Accessories

Sockets & Accessories, KUP Relays (Continued)

470

10-2012, Rev. 1012

www.te.com

a TE Connectivity Ltd. company.

Catalog and product speciﬁcation according

to IEC 61810-1 and to be used only together

with the ‘Deﬁnitions’ section.

Catalog and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Catalog product data, ‘Deﬁnitions’ section,

application notes and all speciﬁcations are

subject to change.

Potter & Brumﬁeld

Dimensions and terminal location

Screw terminal socket for relays with 4 poles 27E867

Socket with screw terminals is available for KUP relays, with 4 poles, with .110” (2.79mm)

quick connect terminals.

Dimensions

24A110 DIN rail style mounting track Track and mounting accessories

Product

Code

Description Part

number

20C254 Snap-in relay hold down spring for use with all KUP sockets listed on these pages except 27E121 and 27E893. 3-1393159-9

20C228 Relay hold down spring for use with hard mount KUP sockets. Is held in place by socket mounting hardware. 1419111-3

20C318 Relay hold down spring for use with 27E893 DIN rail screw terminal socket 4-1393159-8

20C314 Relay hold down clip for use with 27E121 screw terminal socket. 2 required per socket. 4-1393159-6

24A110 Mounting track 1419111-6

24A071 Steel mounting clip with #6-32 screw -

use with 27E166 on 24A110 track

1419111-5

24A072 Plastic twist mounting clip -

use with 27E166 on 24A110 track

5-1393159-4

40G432 Plastic insulator - use with 24A071 to make end clip for 24A110 track 9-1393159-5

1.375 ± .010

(34.93 ± .254)

.405 ± .0 07

(10.29 ± .178)

6.00

(152.4)

3.00

(76.2)

.750

(19.05)

.187

(4.75)

36.00 ± .060

(914.4 ± 1.52)

24A110 mounting track is designed to accept snap-mount sockets, as well as other P&B

screw terminal sockets. Track is made of lightweight, sturdy extruded aluminum and is

shipped in three-foot (914cm) lengths with mounting holes on six-inch (152mm) centers.

Track can be cut to shorter lengths or used end-to-end.

Ordering Code for Accessories

24A110

40G432

24A072

24A071

All accessories must be ordered separately.

+ + + +

+ + +

+ + + +

1.750 ± .0 10

(44.45 ± .254)

3.50 ± .030

(88.9 ± .762)

2.250 ± .0 10

(57.15 ± .254)

2.750 ± .0 15

(69.96 ± .381)

.230 ± .030

(5.84 ± .762) .770 MAX.

(19.56)

.062 REF .

(1.57)

.150 MAX.

(3.81)

#6-32 SCREWS

.250 ± .010

(6.35 ± .254)

.156 DIA. (3.96)

MTNG. HOLES 2 PLACES

Suggested track mounting

Suggested chassis mounting

40G432

INSULATOR

1.12L x .41W x .26H

(28.4 x 10.4 x 6.60)

1.375

(34.93)

.187 MIN.

(4.75)

27E867

PC BOARD

24A110

TRACK

24A071

MOUNTING CLIP

CHASSIS

SUGGESTED STANDOFF

.375 (9.53) DIA. MIN;

.625 (15.88) DIA. MAX.

(CUSTOMER SUPPLIED)

OR INSULATOR (40G432)

.187 MIN.

(4.75)

27E867

PC BOARD

General Purpose

Accessories

Sockets & Accessories, KUP Relays (Continued)