Indicator (Rectangular) M2P CSM_M2P_DS_E_3_2 Large Rectangular-bodied Indicators * Excellent illumination with even surface brightness. * Three-color models (green, orange, red; chameleon lighting) included in lineup. Refer to Safety Precautions for All Pushbutton Switches/ Indicators and Safety Precautions of A3P. List of Models Model Appearance 52 max. 6.7 M2PJ (Rectangular) 25 32 52 max. 6.7 M2PA (Square) 25 25 6.4 52 max. M2PT (Round) 32 dia. Panel cutout dimensions: Refer to page 12. Dimensions: Refer to page 11. Accessories, replacements, and tools: Refer to the A3P. Specifications: Refer to the A3P. 1 M2P Model Number Structure Model Number Legend ..... The model numbers used to order sets of Units are illustrated below. One set comprises the Display, Lamp, and Socket. For information on combinations, refer to Ordering Information. (4) (5) 24E R (1) (2) (3) M2P J -90A 1 1 - 24E RW (1) Shape of Display Symbol Shape J Rectangular A Square T Round ..........Single screen Upper Lower ........................... Horizontal 2-split screen (2) Screen Pattern Illumination-only models Symbol Screen pattern Single screen 1 (3) Case Color Symbol 1 2 (5) Color of Display For LED Color Black Light gray Symbol R O G W K Note: M2PT model is available in light gray only. 2-split screen 2 Chameleon *1 G Note: The chameleon screen pattern is not available with M2PT models. The chameleon screen pattern is only available with 12 or 24-VDC models. *1. With chameleon models, the whole screen lights red, green, or orange. When not lit, the display is white. * The available rectangular models are shown below. Select from among the individual products shown on page 7. Vertical 2-split screen models 4-split screen models Horizontal 3-split Vertical 3-split screen models screen models The above diagrams show the Sockets with the " " mark facing down. Colored-illumination models up to the 4-split screen models are available as individual Units. Refer to page 7. "Colored-illumination" models operate in the way shown below: Unlit Lit White Color The built-in LED is colored. R (Red) Upper W (White) Lower Color Red Orange Green White Chameleon * The chameleon screen pattern is not available with M2PT models. * The chameleon screen pattern is only available with 12 or 24-VDC models. (4) Lighting Method LED-lighted Models (M2PJ and M2PA Only) For Incandescent Lamp Symbol Rated voltage 05E 5 VDC 12E 12 VDC 24E 24 VDC Symbol Color Red, Orange, No symbol White, Blue, Green LED Lamp-lighted Models (M2PT Only) * Includes colored plate. Refer to page 8 for details. * (Low-power incandescent lamp) Symbol Rated voltage 05C 5 VDC 12C 12 VDC 24C 24 VDC Note: M2PJ and M2PA can also be ordered separately. Refer to page 7 for details. Incandescent Lamp lighted Models Symbol Rated voltage 06 6 VAC/VDC 14 14 VAC/VDC 28 28 VAC/VDC Number of Built-in LED Lamps Screen pattern Single screen Horizontal 2split screen Vertical 2-split screen Horizontal 3split screen Vertical 3-split screen 4-split screen Number of Built-in Incandescent Lamps Screen pattern A3PJ A3PA 2 Single screen 2 1 2 --- Horizontal 2split screen 2 --- --- --- --- --- --- --- A3PJ A3PA A3PT Built-in LED models Vertical 2-split screen 4 *2 --- --- 3-split, E shape/ T shape 4 (Lowpower incandescent lamp) *2 4-split screen A3PT *2. These split screen models are available only as individual Units. They cannot be ordered as sets. 2 M2P Ordering Information Ordering as a Set ................................. The model numbers used to order sets of Units are given in the following tables. One set comprises the Display, Lamp, and Socket. M2PJ (Rectangular) Single Screen Models Rectangular (Single Screen) Single screen (1) Case color Black Lighting method LED Chameleon Incandescent lamp Light gray 5 VDC M2PJ-90A11-05E(1) M2PJ-90A12-05E(1) 12 VDC M2PJ-90A11-12E(1) M2PJ-90A12-12E(1) 24 VDC M2PJ-90A11-24E(1) M2PJ-90A12-24E(1) 12 VDC M2PJ-90AG1-12EK M2PJ-90AG2-12EK 24 VDC M2PJ-90AG1-24EK M2PJ-90AG2-24EK 6 VDC/VAC M2PJ-90A11-06 M2PJ-90A12-06 14 VDC/VAC M2PJ-90A11-14 M2PJ-90A12-14 28 VDC/VAC M2PJ-90A11-28 M2PJ-90A12-28 Display color symbol R O G W *1 *2 Note: Enter the desired color symbol for the Display in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White. Example: Red MPJ-90A11-24E R *1. You can change the screen colors of chameleon models between red, green, and orange by changing the terminal wiring. Refer to page 14 for details. *2. Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination. Rectangular (Single Screen) Case color Incandescent lamp (2) Black Lighting method LED (1) 2-split screen Light gray 24 VDC M2PJ-90A21-24E(1)(2) 6 VDC/VAC M2PJ-90A21-06 M2PJ-90A22-24E(1)(2) 14 VDC/VAC M2PJ-90A21-14 M2PJ-90A22-14 28 VDC/VAC M2PJ-90A21-28 M2PJ-90A22-28 Display color symbol ROGW --* Note: Enter the desired color symbols for the Display in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White. Example: Red Upper White Lower M2PJ-90A21-24E R W Red White * Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination. Individual models: Refer to pages 6 to 8. Specifications: Refer to the A3P. (The Display, Lamp, and Socket can be ordered separately.) Dimensions: Refer to page 11. Accessories: Refer to the A3P. 3 M2P Ordering Information Ordering as a Set ..................................The model numbers used to order sets of Units are given in the following tables. One set comprises the Display, Lamp, and Socket. M2PA (Square) Single Screen Models Square (Single Screen) Single screen (1) Case color Black Light gray 5 VDC M2PA-90A11-05E(1) M2PA-90A12-05E(1) 12 VDC M2PA-90A11-12E(1) M2PA-90A12-12E(1) 24 VDC M2PA-90A11-24E(1) M2PA-90A12-24E(1) 12 VDC M2PA-90AG1-12EK M2PA-90AG2-12EK 24 VDC M2PA-90AG1-24EK M2PA-90AG2-24EK 6 VDC/VAC M2PA-90A11-06 M2PA-90A12-06 14 VDC/VAC M2PA-90A11-14 M2PA-90A12-14 28 VDC/VAC M2PA-90A11-28 M2PA-90A12-28 Lighting method LED Chameleon Incandescent lamp Display color symbol ROGW *1 *2 Note: Enter the desired color symbol for the Display in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White. Example: Red M2PA-90A11-24E R *1. You can change the screen colors of chameleon models between red, green, and orange, by changing the terminal wiring. Refer to page 14 for details. *2. Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination. Square (Horizontal 2-split screen) (1) 2-split screen (2) Case color Lighting method LED 24 VDC 6 VDC/VAC Incandescent 14 VDC/VAC lamp 28 VDC/VAC Black M2PA-90A21-24E(1)(2) M2PA-90A21-06 M2PA-90A21-14 M2PA-90A21-28 Light gray M2PA-90A22-24E(1)(2) M2PA-90A22-06 M2PA-90A22-14 M2PA-90A22-28 Display color symbol ROGW * Note: Enter the desired color symbols for the Display in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White. Example: Red Upper White Lower M2PA-90D21-24E R W Red White * Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination. M2PT (Round) Single Screen Models Round (Single Screen) Single screen Case color Lighting method (1) Light gray LED 5 VDC 12 VDC 24 VDC M2PT-90A12-05C(1) M2PT-90A12-12C(1) M2PT-90A12-24C(1) Incandescent lamp 28 VDC/VAC M2PT-90A12-28 Display color symbol ROGW * Note: Enter the desired color symbol for the Display in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White. Example: Red M2PT-90A12-24C R * Incandescent lamps are supplied with a colored plates (white, red, green, blue, and orange). Use the appropriate combination. Models A3PT and M2PT (round models), however, are not supplied with legend plates. Individual models: Refer to pages 6 to 8. Specifications: Refer to the A3P. (The Display, Lamp, and Socket can be ordered separately.) Dimensions: Refer to page 11. Accessories: Refer to the A3P. 4 M2P Ordering Information Illumination-only and Colored-illumination LED Models "Illumination only" describes LED models for which the screen color is the same whether the LED is lit or not. The screen simply becomes brighter when the LED lights. Example: Red LED Not lit Cap (transparent) Red Lit Red Legend plate (transparent) Display Colored plate (red) Lamp holder LED lamp (red) - - - Lamp "Colored illumination" describes LED models for which the screen color is white when the LED is not lit and changes to the color of the LED lamp when the LED is lit. Example: Red LED Not lit Cap (transparent) White Lit Red Legend plate (transparent) Display Colored plate (white) Lamp holder LED lamp (red) - - - Lamp Ordering: For a colored-illumination Indicator, order the Display, Lamp, and Socket as shown in the following table. Display * Select the LED lamp-lighted model required from the selection on page 7. Each assembly includes the number of white colored plates required to enable colored illumination for the corresponding screen-split configuration. For example, 4-split screen models includes 4 white colored plates. Lamp * Select the LED lamps to suit your desired coloration from the selection on page 8. * Number of necessary LED lamps (standard): M2PJ (rectangular): 4 M2PA (square): 2 M2PT (round): 2 Socket * Select from the Sockets on page 8. 5 M2P Ordering Information Ordering Individually ....... Displays, Lamps, and Sockets can be ordered separately. Combinations that are not available as sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs. LED-lighted/Chameleon Models (LED is built into the Display.) LED Lamp-lighted Models (LED lamp and Display are separate.) Display Incandescent Lamp-lighted Models (Incandescent lamp and Display are separate.) Display Display Round (M2PT) models not available. * M2P@-5@@@-@@E (for Indicator) * M2P@-502@ (for Indicator) * M2P@-501@ (for Indicator) Lamp (LED Lamp) *1 Lamp (Incandescent Lamp) *2 SLL-@@E@ * Standard lamp: SLL-@@ * Low-power lamp: SLL-@@H Socket * Socket * Socket * * M2P@-7@@@-@ (for Indicator) * M2P@-7@@@-@ (for Indicator) * M2P@-7@@@-@ (for Indicator) * The Socket is compatible with LED-lighted, LED lamp-lighted, and incandescent lamp-lighted models. *1. Number of necessary LED lamps. Screen pattern M2PJ *2. Number of necessary incandescent lamps. M2PJ M2PA M2PT 2 1 2 --- Horizontal 2-split screen 2 --- --- --- Vertical 2-split screen --- --- Vertical 3-split screen Horizontal 3-split screen --- --- --- --- 4-split screen --- --- --- --- Single screen Horizontal 2-split screen Vertical 2-split screen Ordering set combinations: Refer to pages 3 to 4. M2PA M2PT 2 2 Single screen 2 4 Screen pattern 4 (lowpower incandesVertical 3-split screen cent Horizontal 3-split screen lamp) 4-split screen Specifications: Refer to the A3P. Dimensions: Refer to page 11. Accessories: Refer to the A3P. 6 M2P Ordering Information Ordering Individually .......Displays, Lamps, and Sockets can be ordered separately. Combinations that are not available as sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs. Display LED-lighted Models (LED is built-in.) Appearance Rectangular models Split-screen color White (W) (color symbol) Single M2PJ-5701-@@E screen Horizontal 2- 2 split screen Square models Green (G) Orange (O) Selection precautions M2PJ-5702-@@E M2PJ-5703-@@E M2PJ-5706-@@E White M2PJ-5711-@@E M2PJ-5712-@@E M2PJ-5713-@@E M2PJ-5716-@@E Red M2PJ-5721-@@E M2PJ-5722-@@E M2PJ-5723-@@E M2PJ-5726-@@E Green M2PJ-5731-@@E M2PJ-5732-@@E M2PJ-5733-@@E M2PJ-5736-@@E Orange M2PJ-5741-@@E M2PJ-5742-@@E M2PJ-5743-@@E M2PJ-5746-@@E Single screen Horizontal 2-split screen Red (R) M2PA-5701-@@E M2PA-5702-@@E M2PA-5703-@@E M2PA-5706-@@E White M2PA-5711-@@E M2PA-5712-@@E M2PA-5713-@@E M2PA-5716-@@E Red M2PA-5721-@@E M2PA-5722-@@E M2PA-5723-@@E M2PA-5726-@@E Green M2PA-5731-@@E M2PA-5732-@@E M2PA-5733-@@E M2PA-5736-@@E Orange M2PA-5741-@@E M2PA-5742-@@E M2PA-5743-@@E M2PA-5746-@@E * Enter the voltage to be used in the @@ at the end of the model number. Examples of voltage used: 5 V= 0 5 E 12 V= 1 2 E 24 V= 2 4 E Horizontal 2-split screen models support only 24V. * For the color of the shaded part, select the model according to the colors given at the top of the table. Note: 1. A cap, legend plate (transparent), colored plate, white plunger case, and LED (with a current-limiting resistor) are built into the standard lighting unit. 2. Split-screen coloring configurations are given with the " " mark on the Sockets facing down. LED Lamp-lighted Models (LED is not built-in.) Model Screen pattern Rectangular models Screen Square models Model Round models Screen Model Selection precautions Screen Model Single screen M2PJ-5021 M2PA-5021 M2PT-5021 Horizontal 2-split screen M2PJ-5022 M2PA-5022 --- Vertical 2-split screen M2PJ-5023 --- --- Horizontal 3-split screen M2PJ-5024 --- --- Vertical 3-split screen 4-split screen M2PJ-5025 M2PJ-5026 Ordering set combinations: Refer to pages 3 to 4. --- --- --- --- * Colored plates (white, red, green, and orange), a legend plate (transparent), and a light baffle (split-screen models only) are included. Use the appropriate combination for the LED coloring required. * The number of white colored plates required to enable colored illumination for the corresponding screen-split configuration is included. (For example, 4-split screen models include 4 white colored plates). * The number of colored plates included for each model are shown in the following table. White Red Green Orange Single screen Screen pattern 1 1 1 1 Horizontal 2-split screen Vertical 2-split screen 2 1 1 1 Horizontal 3-split screen Vertical 3-split screen 3 2 2 2 4-split screen 4 1 1 1 Specifications: Refer to the A3P. Dimensions: Refer to page 11. Accessories: Refer to the A3P. 7 M2P Ordering Information Ordering Individually ...........Displays, Lamps, and Sockets can be ordered separately. Combinations that are not available as sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs. Display Incandescent Lamp-lighted Models (Incandescent lamp is not built-in.) Model Rectangular models Screen pattern Screen Square models Model Round models Model Model Selection precautions Model Model M2PT-5011 * * Colored plates (white, red, green, orange, and blue), a legend plate (transparent), and a light baffle (split-screen models only) are supplied. * M2PT (round) models do not contain a legend plate. * The number of colored plates supplied is shown in the following table. Single screen M2PJ-5011 M2PA-5011 Horizontal 2split screen M2PJ-5012 M2PA-5012 --- Vertical 2-split screen M2PJ-5013 --- --- Horizontal 3split screen White Red Green Orange Blue M2PJ-5014 --- --- Single screen 1 1 1 1 1 Horizontal 2-split screen Vertical 2-split screen 1 1 1 1 1 Horizontal 3-split screen Vertical 3-split screen 2 2 2 2 2 4-split screen 2 2 2 2 2 Screen pattern Vertical 3-split screen M2PJ-5015 --- --- 4-split screen M2PJ-5016 --- --- Chameleon Models (with Built-in LED) Shape Chameleon indicator Rated voltage 12 VDC M2PJ-5800-12E 24 VDC M2PJ-5800-24E 12 VDC M2PA-5800-12E 24 VDC M2PA-5800-24E Rectangular Note: 1. With the chameleon models, the whole screen lights red, green, or orange (i.e., red and green simultaneously). 2. A cap, legend plate (transparent), white colored plate, and LED (with a current-limiting resistor) are built into the Display. Square Lamp (For mounting, refer to the A3P.) LED Lamp Voltage Color 5 VDC 12 VDC 24 VDC Model (DC only) Model (DC only) Model (DC only) Applicable cap (color) (colored plate) Red SLL-05ER SLL-12ER SLL-24ER Red Yellow SLL-05EY SLL-12EY SLL-24EY Orange Green SLL-05EG SLL-12EG SLL-24EG Green White SLL-05EW SLL-12EW SLL-24EW White Standard lamp Low-voltage lamp Selection precautions In the standard setup, 4 LED lamps are used with M2PJ models and 2 LED lamps are used with M2PA and M2PT models. Incandescent Lamp Voltage Lamp type 5 VAC/VDC SLL-06 SLL-06H 12 VAC/VDC SLL-14 SLL-14H 24 VAC/VDC SLL-28 SLL-28H Socket Selection precautions * In the standard setup for M2PJ models, 2 lamps are used with single screen models, and 4 lamps are used with split-screen models. If 3 or 4 lamps are lit continuously, use lowpower lamps. * In the standard setup for M2PA models, 1 lamp is used with single screen models, and 2 lamps are used with split-screen models. * In the standard setup for M2PT models, 2 lamps are used. (common to both incandescent lamp-lighted and LED-lighted models) Rectangular Square Model M2PJ-7010-1 Round Model M2PA-7010-1 Ordering set combinations: Refer to pages 3 to 4. Selection precautions Model M2PT-7010-2 * The end digit denotes the color of the flange: -1 denotes a black flange, and -2 denotes a light gray flange. Round switches are available only in light gray, and not in black. Specifications: Refer to the A3P. Dimensions: Refer to page 11. Accessories: Refer to the A3P. 8 M2P Ordering Information Accessories Accessories are the same as those for the A3P Lighted Pushbutton Switches. Refer to the A3P. Approved Standard Ratings LED and Incandescent Lamp Ratings and Characteristics LED: 24 VDC max. Incandescent lamp: 28 VAC/VDC,1.2 W max. UL (File No. E41515), CSA (File No. LR45258) Note: Certification has been obtained for the Indicator. For detailed information on individual products that have received certification, consult your supplier. Ratings and characteristics the same as those for the A3P Lighted Pushbutton Switches. Refer to the A3P. Nomenclature Construction Lighting method Models Screen pattern LED-lighted models (LED is built-in.) LED lamp-lighted models (LED is not built-in.) M2PJ Incandescent lamp-lighted models (Incandescent lamp is not built-in.) M2PJ M2PA M2PA M2PT Single screen Single screen Single screen Vertical 3-split screen Single screen Single screen Horizontal 2split screen Horizontal 2split screen Horizontal 2split screen Horizontal 3split screen Horizontal 2-split screen Chameleon (3-color) Chameleon (3-color) Vertical 2split screen 4-split screen LED-lighted models LED-lighted models LED lamp-lighted models M2PA M2PT Single screen M2PJ Vertical 3-split screen Single screen Single screen Horizontal 2split screen Horizontal 3split screen Horizontal 2-split screen Vertical 2split screen 4-split screen Incandescent lamp-lighted models Chameleon models (full screen illumination in one of three colors) Cap (transparent) Cap (transparent) Cap (transparent) Display Legend plate (transparent) Legend plate (transparent) (Split-screen models Legend plate * contain light baffles.) (transparent) Display Colors: Colored plate Colored plate * LED-lighted and LED Colored plate lamp-lighted models LED Unit LED Unit 3-color emitter White, Red, Green, Orange Built-in LED Lamp holder * Incandescent lamp-lighted models White, Red, Green, Blue, Orange * Incandescent lamp-lighted M2PT models do not contain legend plates. Lamp Case Color Select either black or light gray to suit your panel design. (The round M2PT models are available in light gray only.) Socket Note: The above diagram for LED lamp-lighted and incandescent lamp-lighted models shows the M2PJ model. 9 M2P Nomenclature M2P Lighting Method Diagram LED-lighted models Single screen models Single screen models LED models Horizontal 2-split screen models Horizontal 2-split Vertical 2-split screen models screen models LED lamp-lighted models Vertical 3-split Horizontal 3-split 4-split screen screen models screen models models M2PJ (rectangular) Single screen models Chameleon models (Full screen illumination in one of three colors) Single screen models Incandescent lamplighted models LED models LED lamp-lighted models Single screen models Horizontal 2-split screen models Single screen models Horizontal 2-split screen models Single screen models M2PA (square) Chameleon models Incandescent lamplighted models Single screen models Horizontal 2-split screen models Single screen models LED models * Individually: See page 6. (Not available as a set.) * As a set: See page 3. * Individually: See page 6. Horizontal 2-split Vertical 2-split screen models screen models* Vertical 3-split Horizontal 3-split 4-split screen screen models* screen models* models* LED-lighted models * As a set: See page 3. * Individually: See page 6. LED lamp-lighted models As a set: See page 3. Individually: See page 6. *Models indicated with an asterisk are only available individually. * As a set: See page 3. * Individually: See page 6. * Individually: See page 6. (Not available as a set.) * As a set: See page 3. * Individually: See page 6. * As a set: See page 3. * Individually: See page 6. * As a set: See page 3. * Individually: See page 6. M2PT (round) Single screen models Incandescent lamplighted models * As a set: See page 3. * Individually: See page 6. 10 M2P Dimensions (Unit: mm) M2PJ (Rectangular) Models M2PA (Square) Models 22 29.90.2 26.1 2.8 OMRON logo OMRON logo #110 quick connect terminal /soldered terminal #110 quick connect terminal /soldered terminal 0.5 250.1 22.90.2 18.9 @19.1 250.1 6.7 320.1 22.90.2 43.6 250.1 52 max. 6.7 43.6 52 max. M2PT (Round) Models #110 quick connect terminal/soldered terminal 22.4 28.5 dia. OMRON logo 23.8 32 dia. 24.9 dia. 6.4 43.6 52 max. Note: Use a panel thickness of 0.5 mm for tab terminals #110 and solder terminals. Accessory Mounting Dimensions Dimensions for mounting accessories are the same as those for the A3P Lighted Pushbutton Switches. Refer to the A3P. 11 M2P Dimensions (Unit: mm) Panel Cutout M2PJ (Rectangular) Models Classification Flange mount models Mounting design Individual mounting (Horizontal) 250.1 Multiple mounting (Horizontal) 250.1 23.50.3 320.1 1 2 32n-1.50.3 n Panel cutout spacing between rows of Units: 23.50.3 32n0.5 3 min. Individual mounting (Vertical) Multiple mounting (Vertical) Individual mounting (Horizontal) Mount to long mounting plate (A3PJ3002) before use. 320.1 Multiple mounting (Horizontal) 320.1 1 2 Mount to long mounting plate (A3PJ3002) before use. n 25n0.5 Multiple mounting (Vertical) 6 min. 30.50.3 25n-1.50.3 30.50.3 36.40.3 23.50.3 39 27 1 2 32.9n+3.50.3 n 23.50.3 33n+61 Individual mounting (Vertical) 23.50.3 27 Mount to long mounting plate (A3PJ3002) before use. 34 320.1 34 1 For barrier mount models, refer to Accessories on the A3P. Panel cutout spacing between rows of Units: Dotted line indicates the position of each mounting barrier. 29.40.3 1.3 6 min. 30.50.3 6 min. 2 Mount to long mounting plate (A3PJ3002) before use. n 26n+61 Note: 1. 2. 3. 4. Remarks 30.50.3 250.1 Barrier mount models Panel cutout 25.9n+3.50.3 30.50.3 n: Number of Units Recommended panel thickness: 1 to 5 mm Mount the panel before mounting the Switch Guard. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating. M2PA (Square) Models Classification Flange mount models Barrier mount models Individual mounting Mounting design Panel cutout Panel cutout spacing between rows of Units: 23.50.3 250.1 Remarks 22.50.3 250.1 33 min. Multiple mounting 250.1 Individual mounting 27 Multiple mounting 27 1 2 23.50.3 n 25n0.1 6 min. 25n-2.50.3 23.50.3 27.80.3 32 Panel cutout spacing between rows of Units: Dotted line indicates the position of each mounting barrier. 1.3 1 2 26n+6.51 n 6 min. 23.50.3 26n+2.50.3 6 min. Note: 1. n: Number of Units 2. Recommended panel thickness: 1 to 5 mm 3. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating. M2PT (Round) Models 6.4 dia. R11.8+0.2 -0 290.3 dia. Note: 1. Recommended panel thickness: 1 to 5 mm 2. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating 4 min. 12 M2P Dimensions (Unit: mm) Terminal connections LED-lighted Models Rated voltage Model 5 VDC Screen pattern BOTTOM VIEW Single screen M2PJ TOP VIEW 12 VDC BOTTOM VIEW NO1 NO1 L4- L2- L1- NC1 L3- LC+ C1 24 VDC TOP VIEW L2- L1- L3- LC+ C1 Lighting block BOTTOM VIEW TOP VIEW Terminal arrangement TOP VIEW NO1 L4- L2- L1- NC1 L3- LC+ C1 L4- NC1 Terminal arrangement BOTTOM VIEW Lighting block BOTTOM VIEW Terminal arrangement Lighting block TOP VIEW 2-split screen NO1 L4- L2- L1- NC1 L3- LC+ C1 Terminal arrangement NO1 L4- L2- L1- NC1 L3- LC+ C1 Lighting block BOTTOM VIEW TOP VIEW Single screen BOTTOM VIEW TOP VIEW NO1 LC+ L1- NO1 LC+ L1- NC1 L2- C1 NC1 L2- C1 NC1 L2- C1 BOTTOM VIEW TOP VIEW 2-split screen BOTTOM VIEW TOP VIEW Lighting block NO1 LC+ L1- Terminal arrangement M2PA Terminal arrangement Terminal Lighting block arrangement BOTTOM VIEW TOP VIEW NO1 LC+ L1- NO1 LC+ L1- NC1 L2- C1 NC1 L2- C1 Terminal Lighting block arrangement Terminal Lighting block arrangement Terminal Lighting block arrangement 13 M2P Incandescent Lamp-lighted/LED Lamp-lighted Models (All are shown with the OMRON logo facing down. The terminal arrangements are the same as for the LED-lighted models.) Model Rectangular M2PJ models Type BOTTOM VIEW TOP VIEW Square M2PA models BOTTOM VIEW TOP VIEW L2- BOTTOM VIEW TOP VIEW NC LC+ L1- L4- Round M2PT models L1- L1- LC+ Indicator L2- LC+ L2- L3- Terminal arrangement Lighting block Terminal arrangement Lighting block Terminal arrangement Lighting block LED Chameleon Models Rated voltage 24 VDC Model Rectangular M2PJ model L2- L4- L3- Square M2PA model L1- LC+ L1- LC+ L2- Terminal Arrangement and Coloring Chameleon Models Wiring Coloring LC+ LC+ L1- L2- Green Red LC+ L1- and L2shorted Orange Safety Precautions Refer to Safety Precautions for All Pushbutton Switches/Indicators and Safety Precautions for the A3P. 14 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. 2012.9 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2012 All Right Reserved.