Extruded Heat Sink Cases
Aluminium
Page 1 29/03/08 V1.1
Features:
Silver anodized aluminium extruded box section to take 55 x 40mm, 55 x 80mm or
55 x 120mm circuit boards.
Idea for small circuits, R.F amplifiers etc.
The maximum height of compnents on a board mounted in the bottom slot is
18mm/20mm depending on orientation.
This box features dovetail slots down the side which accept a Linc-Lug mounting
bracket to facilitate surface mounting.
Optional gaskets allow waterproofing.
One side of the box features two sets of appearance enhancing groves.
Between the sets of groves is a shallow (0.5mm deep) recess which could be used
for a label.
Description Part Number
Case, Aluminium, 40 x 63.5 x 30mm MCREAS40
Case, Aluminium, 80 x 63.5 x 30mm MCREAS80
Case, Aluminium, 120 x 63.5 x 30mm MCREAS120
Dimensions : Millimetres
Part Number Table
Specifications:
Length Tolerance : Nominal length -0mm/+1mm.
Non-standard Lengths : Available.
Material : Aluminium 6063 T6 (HE9).
Finish : Silver anodized 5µm thickness to BS 1615 - can be painted directly if required. The inside and cut ends
are not anodized.
Weight : 1.0Kg/m.
Perimeter : 220mm (outside), 217mm (inside).
Screw ports : Nominal diameter 2.7mm to take a No.4 self-tapping screw with a 3mm major diameter of a type normally
used for plastic. They are not suitable for ordinary self-tapping screws that have a 2.9mm diameter with a
wide tolerance. The screw ports can be threaded M3 using a thread-rolling tap, but a thread cutting tap
will make a week thread. Alternatively an M3 thread-forming screw can be used to roll its own thread.
For enquiries from all other markets
Extruded Heat Sink Cases
Aluminium
Page 2 29/03/08 V1.1
Notes:
International Sales Offices:
AUSTRALIA Farnell
Tel No: ++61 1300 361 005
Fax No: ++61 1300 361 225
FRANCE Farnell
Tel No: ++ 33 474 68 99 99
Fax No: ++ 33 474 68 99 90
NORWAY Farnell
Tel No: 800 146 70
Fax No: 800 146 76
AUSTRIA Farnell
Tel No: ++ 43 662 2180 680
Fax No: ++ 43 662 2180 670
GERMANY Farnell
Tel No: ++ 49 89 61 39 39 39
Fax No: ++ 49 89 613 59 01
PORTUGAL Farnell
Tel No: ++ 34 93 475 8804
Fax No: ++ 34 93 474 5288
RUSSIA Farnell
Tel No: ++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
ESTONIA Farnell
Tel No: ++ 358 9 560 7780
Fax No: ++ 358 9 345 5411
NETHERLANDS
Farnell
Tel No: ++ 31 30 241 7373
Fax No: ++ 31 30 241 7333
UK Farnell
Tel No: ++ 44 8701 200 200
Fax No: ++ 44 8701 200 201
SINGAPORE
Farnell-Newark
Tel No: ++ 65 6788 0200
Fax No: ++ 65 6788 0300
HONG KONG
Farnell-Newark
Tel No: ++ 852 2268 9888
Fax No: ++ 852 2268 9899
HUNGARY
- Farnell
Tel No: ++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
BELGIUM Farnell
Tel No: ++ 32 3 475 2810
Fax No: ++ 32 3 227 3648
BRAZIL – Farnell-Newark
Tel No: ++ 55 11 4066 9400
Fax No: ++ 55 11 4066 9410
IRELAND Farnell
Tel No: ++ 353 1 830 9277
Fax No: ++ 353 1 830 9016
INDIA
- Farnell
Tel No: ++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
ISRAEL Farnell
Tel No: ++ 180 937 0015
Fax No: ++ 180 937 0014
SPAIN Farnell
Tel No: 901 20 20 80
Fax No: 901 20 20 90
CHINA Farnell-Newark
Tel No: ++86 10 6238 5152
Fax No: ++86 10 6238 5022
CZECH REPUBLIC
- Farnell
Tel No: ++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
ITALY Farnell
Tel No: ++ 39 02 93 995 200
Fax No: ++ 39 02 93 995 300
SWEDEN Farnell
Tel No: ++ 46 8 730 50 00
Fax No: ++ 46 8 83 52 62
MALAYSIA
Farnell-Newark
Tel No: ++ 60 3 7873 8000
Fax No: ++ 60 3 7873 7000
SWITZERLAND
Farnell
Tel No: ++ 44 204 64 64
Fax No: ++ 44 204 64 54
DENMARK Farnell
Tel No: ++ 45 44 53 66 44
Fax No: ++ 45 44 53 66 06
UK CPC
++ 44 8701 202 530
++ 44 8701 202 531
USA
Newark
Tel No: 800 463 9275
NEW ZEALAND
Farnell
Tel No: 0800 90 80 80
Fax No: 0800 90 80 81
EXPORT Farnell
Tel No: ++ 44 8701 200 208
Fax No: ++ 44 8701 200 209
export
FINLAND Farnell
Tel No: ++ 358 9 560 7780
Fax No: ++ 358 9 345 5411
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. © Premier Farnell plc 2008.
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk