CPC1035N 350V Normally-Open Single-Pole 4-Pin SOP OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Rating 350 100 35 Units VP mArms / mADC Features * 1500Vrms Input/Output Isolation * Small 4-Pin SOP Package * Low Drive Power Requirements * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Halogen-Free * Flammability Rating UL 94 V-0 * Tape & Reel Version Available Description The CPC1035N is a miniature normally-open, single-pole, (1-Form-A) solid state relay in a 4-pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input to output isolation. The efficient MOSFET switches and photovoltaic die use IXYS Integrated Circuits Division's patented OptoMOS architecture while the optically coupled output is controlled by a highly efficient infrared LED. IXYS Integrated Circuits Division's state of the art double-molded vertical construction packaging makes the CPC1035N one of the world's smallest relays. It offers board space savings of at least 20% over the competitor's larger 4-pin SOP relay. Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1172007 * EN/IEC 60950-1 Certified Component: Certificate B 13 12 82667 003 Ordering Information Part # CPC1035N CPC1035NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) * For other packaging options consult factory. Pin Configuration + Control - Control 1 4 3 2 Load Load Switching Characteristics of Normally-Open Devices Form-A IF 90% 10% ILOAD ton DS-CPC1035N-R16 www.ixysic.com toff 1 INTEGRATED CIRCUITS DIVISION CPC1035N Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 350 5 50 1 70 400 1500 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms C C Typical values are characteristic of the device at +25C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements. Derate linearly 3.33 mW / C Electrical Characteristics @ 25C Parameter Output Characteristics Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate 3 Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Input to Output Characteristics Capacitance, Input to Output 1 2 3 2 Conditions Symbol Min Typ Max Units t=10ms IL=100mA VL=350VP IL ILPK RON ILEAK - 30 - 100 350 35 1 mArms / mADC mAP A IF=0mA, VL=50V, f=1MHz ton toff COUT - 9 2 1 - IL=100mA IF=5mA VR=5V IF IF VF IR 0.3 0.9 - 0.8 0.7 1.2 - 2 1.5 10 mA mA V A 0.7 1.45 pF IF=5mA, VL=10V VIO=0V, f=1MHz CIO Load current derates linearly from 100mA @ 25oC to 70mA @85oC. Measurement taken within 1 second of on-time. For applications requiring high temperature operation (greater than 60oC) a minimum LED drive current of 4mA is recommended. www.ixysic.com ms pF R16 INTEGRATED CIRCUITS DIVISION CPC1035N PERFORMANCE DATA* Typical LED Forward Voltage Drop (N=50, IF=5mA) 25 Device Count (N) 25 20 15 10 5 20 15 10 5 1.17 0.50 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) Typical IF for Switch Operation (N=50, IL=100mA) 25 Device Count (N) 15 10 5 0.60 0.70 0.80 0.90 1.00 Turn-On Time (ms) 0.55 0.60 0.65 0.70 0.75 0.80 LED Current (mA) 10 5 0.21 0.22 0.23 0.24 0.25 0.26 0.27 Turn-Off Time (ms) Typical On-Resistance Distribution (N=50, IF=2mA, IL=100mA) 35 30 20 15 10 5 25 20 15 10 5 0 0 15 1.10 Typical IF for Switch Dropout (N=50, IL=100mA) 25 20 20 0 0 0 Typical Turn-Off Time (N=50, IF=5mA, IL=100mA) 25 Device Count (N) Device Count (N) 30 Device Count (N) 35 Device Count (N) Typical Turn-On Time (N=50, IF=5mA, IL=100mA) 0 0.55 0.85 0.60 0.65 0.70 0.75 0.80 LED Current (mA) 0.85 26 27 28 29 30 On-Resistance (:) 31 32 Typical Blocking Voltage Distribution (N=50) 35 Device Count (N) 30 25 20 15 10 5 0 377.5 388.5 399.5 410.5 421.5 432.5 443.5 Blocking Voltage (VP) Typical Turn-On Time vs. LED Forward Current (IL=100mA) 1.6 1.4 I F = 50mA I F = 30mA I F = 20mA I F = 10mA I F = 5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 Temperature (C) 100 120 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Typical Turn-Off Time vs. LED Forward Current (IL=100mA) 1.4 1.2 Turn-Off Time (ms) 1.8 Turn-On Time (ms) LED Forward Voltage Drop (V) Typical LED Forward Voltage Drop vs. Temperature 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) *Unless otherwise noted, data presented in these graphs is typical of device operation at 25C. For guaranteed parameters not indicated in the written specifications, please contact our application department. R16 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION CPC1035N I F = 5mA I F = 10mA -40 3.0 -20 0 20 40 60 80 100 I F = 10mA 30 20 10 I F = 5mA 0 -20 0 20 40 60 80 100 -40 0 20 40 60 80 100 Temperature (C) Typical IF for Switch Operation vs. Temperature (IL=50mA) Typical IF for Switch Dropout vs. Temperature (IL=50mA) Typical Load Current vs. Load Voltage (IF=5mA) 3.0 150 2.5 LED Current (mA) 1.5 1.0 2.0 1.5 1.0 0.5 0.5 0 0 -20 0 20 40 60 Temperature (C) 80 100 100 50 0 -50 -100 -150 -40 -20 0 20 40 60 80 100 -3 Typical Blocking Voltage vs. Temperature 0.014 420 0.012 140 120 100 I F =10mA 80 60 I F =5mA 40 20 0 Leakage (A) 0.016 425 Blocking Voltage (VP) 430 415 20 40 60 80 100 120 410 405 -40 -20 0 20 40 60 Temperature (C) 3 Typical Leakage vs. Temperature Measured Across Pins 3&4 (VL=350V) 0.008 0.006 Load Current (A) 40 30 20 10 0 100 150 200 250 Load Voltage (V) 300 350 80 0 -40 100 -20 0 20 40 60 Temperature (C) 80 100 Energy Rating Curve 50 Output Capacitance (pF) 2 0.002 Output Capacitance vs. Load Voltage (IF=0mA, f=1MHz) 50 1 0.004 400 Temperature (C) 0 0 0.010 395 0 -1 Load Voltage (V) 160 -20 -2 Temperature (C) 180 -40 -20 Temperature (C) Typical Maximum Load Current vs. Temperature Load Current (mA) 40 Temperature (C) 2.0 -40 60 Typical On-Resistance vs. Temperature (IF=10mA, IL=50mA) 50 -40 2.5 LED Current (mA) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Load Current (mA) 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 Typical Turn-Off Time vs. Temperature (IL=50mA) On-Resistance (:) Typical Turn-On Time vs. Temperature (IL=50mA) Turn-Off Time (ms) Turn-On Time (ms) PERFORMANCE DATA* 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time *Unless otherwise noted, data presented in these graphs is typical of device operation at 25C. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R16 INTEGRATED CIRCUITS DIVISION CPC1035N Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Classification CPC1035N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Soldering Profile Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the body temperature of this device may be (TC - 5)C or greater. The classification temperature sets the Maximum Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other processes, the guidelines of J-STD-020 must be observed. Device Classification Temperature (Tc) Dwell Time (tp) Max Reflow Cycles CPC1035N 260C 30 seconds 3 Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. Board washing to reduce or remove flux residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the variability of the wash parameters used to clean the board, determination of the bake temperature and duration necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based. R16 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION CPC1035N MECHANICAL DIMENSIONS CPC1035N 4.089 0.025 (0.161 0.001) Recommended PCB Land Pattern 0.203 Typ (0.008 Typ) 0.55 (0.022) 6.096 0.102 (0.240 0.004) 3.810 0.025 (0.150 0.001) 0.559 0.127 (0.022 0.005) 5.50 (0.217) 0.910 0.025 (0.036 0.001) Pin 1 2.54 Typ (0.100 Typ) 1.45 (0.057) 2.030 0.025 (0.080 0.001) 2.54 (0.10) Pin to package standoff: 0.064 0.040 (0.0025 0.0015) 0.481 (0.019) 0-0.1 (0-0.004) 0.381 TYP. (0.015 TYP.) CPC1035N device weight = 0.075 grams Dimensions mm (inches) CPC1035NTR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 (0.472) B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossed Carrier Embossment NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC1035N-R16 (c)Copyright 2017, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 5/25/2017