COMPONENTS PRODUCT INFORMATION
CONNECTOR
NEW
1/5
MB-0221-1
December 2010
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
ES3 Series
LED Power Supply Card Edge Type Connector
RoHS Compliant
The ES3 Series is a card edge connector for power supply of LED lighting devices that
enables direct connection of the converter board and the LED mounting board.
It is a 2-position card edge type connector ideal for LED bulb and LED lighting devices.
The ES3 Series connectors are available in embossed tape, compatible with SMT
mounting.
The connector allows reflow solder mounting to the LED mounting board to occur at
the same time other parts like LED and SMT components are mounted.
Connector
Cover
Screws
LEDs
LED Mounting
Board Connector
Heat Sink
(Aluminum Die-cast,
or Similar)
Converter Board
Insulation Case (Base)
Drawing of Inside of LED Bulb
(For Reference)
MB-0221-1
2/5
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
Materials and Finishes
Ordering Information
Copper alloy / Sn platingContact-L
Copper alloy / Sn platingContact-R
White LCPInsulator
Material / FinishComponent
ES3 B002 W F 1 R****
Series
No. of Contacts
Modification Code
Reel Product (Note1)
Connection Area Plating
F: Sn plating
Features
No. of Contacts: 2 pos.
Contact Resistance: 60mΩmax. (initial)
Dielectric Withstanding Voltage: AC 500Vr.m.s (per minute)
Durability: 20 mating cycles
Board Insertion Force: 30N max.
Rated Current: 1A
Rated Voltage: AC, DC 200V
Insulation Resistance: 10MΩmin. (after test)
Operating Temperature: -40 to+105 Deg. C
Low-profile 1.6mm mounting height, designed with consideration for light shielding.
Insulator is made of white LCP for heat and light resistance.
Direct connection of converter board and LED mounting board allows for reduced
assembly work time.
Cable-less connection makes reduction in the number of parts possible.
SMT type, can be mounted at the same time as other components to the LED
mounting board.
General Specifications
Connection
B: Bottom Mount Type
Connection to Board
W: SMT straight type, without hold-down
MB-0221-1
3/5
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
Drawing
Unit: mm
SJ110395
ES3B002WF1
SJ Drawing
Part Number
MB-0221-1
4/5
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
Applicable Dimensions of Board
(Card Side, for Reference)
Applicable Dimensions of Board
(SMT Side, for Reference)
Unit: mm
MB-0221-1
5/5
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
Product Marketing Division
Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539
Phone: +81- 3-3780-2787 FA X: + 81- 3-3 780-2946
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.
Notice: Products shown in this brochure are
made for the applications listed below. However,
if the above-mentioned products are to be used in
aerospace devices, marine cable-connection
devices, atomic power control systems, medical
equipment for life-support systems, or any other
specific application requiring extremely high
reliability, please contact JAE for further
information.
Recommended applications: Computers, Office
machines, Measuring devices,
Telecommunication devices (Terminals, Mobile
devices), AV devices, Household applications, FA
devices, etc.
ＢＢ
SJ110396
ES3B002WF1R1000
SJ Drawing
Part Number Unit: mm
