Semiconductor Components Industries, LLC, 2001
March, 2001 – Rev. 7 1Publication Order Number:
1N4001/D
1N4001, 1N4002, 1N4003,
1N4004, 1N4005, 1N4006,
1N4007
1N4004 and 1N4007 are Preferred Devices
Axial Lead Standard
Recovery Rectifiers
This data sheet provides information on subminiature size, axial
lead mounted rectifiers for general–purpose low–power applications.
Mechanical Characteristics
•Case: Epoxy, Molded
•Weight: 0.4 gram (approximately)
•Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
•Lead and Mounting Surface Temperature for Soldering Purposes:
220°C Max. for 10 Seconds, 1/16″ from case
•Shipped in plastic bags, 1000 per bag.
•Available Tape and Reeled, 5000 per reel, by adding a “RL” suffix to
the part number
•Available in Fan–Fold Packaging, 3000 per box, by adding a “FF”
suffix to the part number
•Polarity: Cathode Indicated by Polarity Band
•Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006,
1N4007
MAXIMUM RATINGS
Rating Symbol 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Unit
*Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
50 100 200 400 600 800 1000 Volts
*Non–Repetitive Peak Reverse Voltage
(halfwave, single phase, 60 Hz) VRSM 60 120 240 480 720 1000 1200 Volts
*RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 Volts
*Average Rectified Forward Current
(single phase, resistive load,
60 Hz, TA = 75°C)
IO1.0 Amp
*Non–Repetitive Peak Surge Current
(surge applied at rated load
conditions)
IFSM 30 (for 1 cycle) Amp
Operating and Storage Junction
Temperature Range TJ
Tstg –65 to +175 °C
*Indicates JEDEC Registered Data
http://onsemi.com
CASE 59–03
AXIAL LEAD
PLASTIC
LEAD MOUNTED RECTIFIERS
50–1000 VOLTS
DIFFUSED JUNCTION
Preferred devices are recommended choices for future use
and best overall value.
MARKING DIAGRAM
See detailed ordering and shipping information on page 2 of
this data sheet.
ORDERING INFORMATION
AL = Assembly Location
1N400x = Device Number
x = 1, 2, 3, 4, 5, 6 or 7
YY = Year
WW = Work Week
AL
1N
400x
YYWW
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
http://onsemi.com
2
ELECTRICAL CHARACTERISTICS*
Rating Symbol Typ Max Unit
Maximum Instantaneous Forward Voltage Drop
(iF = 1.0 Amp, TJ = 25°C) vF0.93 1.1 Volts
Maximum Full–Cycle Average Forward Voltage Drop
(IO = 1.0 Amp, TL = 75°C, 1 inch leads) VF(AV) – 0.8 Volts
Maximum Reverse Current (rated dc voltage)
(TJ = 25°C)
(TJ = 100°C)
IR0.05
1.0 10
50
µA
Maximum Full–Cycle Average Reverse Current
(IO = 1.0 Amp, TL = 75°C, 1 inch leads) IR(AV) – 30 µA
*Indicates JEDEC Registered Data
ORDERING & SHIPPING INFORMATION
Device Package Shipping
1N4001 Axial Lead 1000 Units/Bag
1N4001FF Axial Lead 3000 Units/Box
1N4001RL Axial Lead 5000/Tape & Reel
1N4002 Axial Lead 1000 Units/Bag
1N4002FF Axial Lead 3000 Units/Box
1N4002RL Axial Lead 5000/Tape & Reel
1N4003 Axial Lead 1000 Units/Bag
1N4003FF Axial Lead 3000 Units/Box
1N4003RL Axial Lead 5000/Tape & Reel
1N4004 Axial Lead 1000 Units/Bag
1N4004FF Axial Lead 3000 Units/Box
1N4004RL Axial Lead 5000/Tape & Reel
1N4005 Axial Lead 1000 Units/Bag
1N4005FF Axial Lead 3000 Units/Box
1N4005RL Axial Lead 5000/Tape & Reel
1N4006 Axial Lead 1000 Units/Bag
1N4006FF Axial Lead 3000 Units/Box
1N4006RL Axial Lead 5000/Tape & Reel
1N4007 Axial Lead 1000 Units/Bag
1N4007FF Axial Lead 3000 Units/Box
1N4007RL Axial Lead 5000/Tape & Reel
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
http://onsemi.com
3
PACKAGE DIMENSIONS
AXIAL LEAD
CASE 59–03
ISSUE M
B
D
K
K
F
F
A
DIM MIN MAX MIN MAX
INCHESMILLIMETERS
A4.07 5.20 0.160 0.205
B2.04 2.71 0.080 0.107
D0.71 0.86 0.028 0.034
F--- 1.27 --- 0.050
K27.94 --- 1.100 ---
NOTES:
1. ALL RULES AND NOTES ASSOCIATED WITH
JEDEC DO-41 OUTLINE SHALL APPLY.
2. POLARITY DENOTED BY CATHODE BAND.
3. LEAD DIAMETER NOT CONTROLLED WITHIN F
DIMENSION.
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
http://onsemi.com
4
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
CENTRAL/SOUTH AMERICA:
Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)
Email: ONlit–spanish@hibbertco.com
Toll–Free from Mexico: Dial 01–800–288–2872 for Access –
then Dial 866–297–9322
ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support
Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)
Toll Free from Hong Kong & Singapore:
001–800–4422–3781
Email: ONlit–asia@hibbertco.com
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: r14525@onsemi.com
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
1N4001/D
NORTH AMERICA Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver , Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: ONlit@hibbertco.com
Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
EUROPE: LDC for ON Semiconductor – European Support
German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET)
Email: ONlit–german@hibbertco.com
French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET)
Email: ONlit–french@hibbertco.com
English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT)
Email: ONlit@hibbertco.com
EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781
*Available from Germany, France, Italy, UK, Ireland
